Supplying and Laying of 3 phase Power Cable for DG set connection to FGH in West Campus at IIT Delhi

Amount

Supplying and Laying of PVC insulated, PVC sheathed XLPE aluminium conductor armored cable of Following size, 1.1 KV grade , direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required [conforming to I.S-1554/1/88] (Make : Havells / Nicco / Polycab / Skytone)

3½ X 150 sq. mm

Supplying and Laying of PVC insulated, PVC sheathed XLPE aluminium conductor armored cable of Following size, 1.1 KV grade ,in existing HDPE pipe etc. as required [conforming to I.S-1554/1/88] (Make : Havells / Nicco / Polycab / Skytone)

3½ X 150 sq. mm

Providing and fixing 8 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

3½ X 150 sq. mm (50mm)

Supplying & laying 120 mm dia HDPE pipe with all accessories inside the road including making the hole with boki, dressing / ramming the trench etc as required. ( pipe shall be ISI marked)

Fabrication, supply, installation testing & commissioning of Outdoor type Electrical control panel of cubicle construction (feeder pillar), floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mounting and internal wiring, earth terminals, sign writing etc. complete in all respect, with following incoming and outgoing, suitable for operation on 415 V, 3 phase, 50Hz ac supply with enclosure protection class IP 66 as required as per following dimensions. The feeder pillar cum panel shall be rested on masonry altar to be made of brick, cement and sand of appropriate size. The work shall include providing and making of feeder pillar altar of rectangular size duly bordered with MS angle of 50 mm x 50 mm x 6 mm. Cable entry and out shall be through masonry altar through HDPE pipe. 4 pieces of 120 mm dia HDPE pipe of 1.0 metre long shall be pre-installed during masonry work and before installation of feeder pillar. Having minimum size: 1050 mm x 650 mm x 300 mm deep. (a) 400 amps, 4P, 36KA, 50HZ, 415V, MCCB: 1 No. (b) 250 Amps 4 Pole, 18KA, 50 Hz, 415V, MCCB: 2 Nos. (c) Earthing studs 2 Nos (d) Danger plate – 02 Nos (e) RYB LED indicating lamp (Make of MCCB: L&T / Havells / Legrand / Siemens / C&S)

SUPER MOTOR WINDING & REFRIGERATION WORK