Open tender for Augmentation of existing Combined Running Room of UDL and DSEY and upgradation of DSEY crew lobby, Extension of Running Room under the jurisdiction of DEN/4/Asansol and Infrastructure for Track maintenance & Operational staff including provision of gang huts, gumtis, drinking water facilities, pathways etc. over Asansol Division.

Item Breakup - A-Overall percentage Above/Below/At Par on assessed cost of schedule-A (N.S.Items)

Supplying, fitting and fixing Coral two way Each angular cock of Parryware brand or similar of model no GI402A1 complete in all respect as per instruction of Engineer-in-Charge

Making board by providing 4mm thick ACP Sqm top pesting with complete cutting vinyl sticker lettering/figure etc. As required as per higher authority complete in all respect as per instruction of Engineer-in-Charge

Supplying and fixing Ovel shape wash basin Each 18" x 22" of Hindware/Parryware or similar brand etc.

Supplying and fixing C.P two in one piller Each cock of Hindware/Parryware or similar brand etc.

Supplying and fixing C.P Commode shower Each complete with all fittings.

Supplying, fitting and fixing water resistant, Sqm Fire Resistant ply as per IS5509 of Century/Green ply/ Green panel brand in wall panelling/ward robe/table top/other furnitures and other ornamental decoration by providing S.S. auto hinge, magnatic lock, decortive handle, lock, locking arrangement, screw and other fittings etc as per requirement at site with proper shape and size. Rate includes all cost of labours, materials which ever required at site complete in all respect as pe EIC. 18mm th plywood

Supplying, fitting and fixing water resistant, Sqm Fire Resistant ply as per IS5509 of Century/Green ply/ Green panel brand in wall panelling/ward robe/table top/other furnitures and other ornamental decoration by providing S.S. auto hinge, magnatic lock, decortive handle, lock, locking arrangement, screw and other fittings etc as per requirement at site with proper shape and size. Rate includes all cost of labours, materials which ever required at site complete in all respect as pe EIC. 12mm th plywood ASANSOL DIVISION-ENGINEERING/EASTERN RLY

Supply, commissioning of Bell water Fountain comprising of the following components: a) 1" brass bell nozzle - 08 nos b) 2 HP 3 phase open well mono-block submersible pump - 01 no. c) Outdoor control panel with MCB, starter, light and pump operating system provision - 01 set d) Warm white 10W LED underwater lights in aluminium housing - 08 nos e) SMPS LED power supply - 01 set f) Required interconnecting PVC pipes and pipe fittings with control valves - 01 lot g) 2.5 sq mm 3 core submersible cable - 100 meter h) 1 sq mm 4 core copper cable for light - 100 meter i) Miscellaneous hardware, light stands and electric fittings - 01 lot. (Including GST)

Supply, commissioning of multi-level double ring auto dancing sequential fountain with the following components: a) 8' diameter G.I. ring 1.5" pipe with 60 sets of brass adjustable ring jet nozzle - 01 set b) 6' diameter G.I. ring 1.5" pipe with 45 sets of brass adjustable ring jet nozzle - 01 set c) 2 HP 3 phase open well mono-block submersible pump - 02 nos d) Fountain control system including 2 x 3 HP VDF HD, 1 x 12 channel fountain controller, 1 x control panel, 1 x sequence controller with SD card and required accessories - 01 set e) 10W/12V DC IP-68 RGB colour changing LED underwater lights in aluminium housing - 14 nos f) Required interconnecting PVC pipes and pipe fittings with control valves - 1 lot g) 2.5 sq mm 3 core submersible cable - 100 mtr h) 1 sq mm 4 core copper cable for light - 100 mtr i) Miscellaneous hardware, light & ring stands with other electrical fittings - 01 lot. (Including GST)

Supply, commissioning of Geyser Fountain comprising of the following components: a) 1" brass geyser nozzle - 06 nos b) 1.5" brass geyser nozzle - 01 no. c) 3 HP 3 phase open well mono-block submersible pump - 01 no. d) Outdoor control panel with MCB, starter, light and pump operating system provision - 01 set e) 10W/12V DC IP-68 white/warm white LED underwater lights in aluminium housing - 15 nos f) SMPS LED power supply - 01 set g) Required interconnecting PVC pipes and pipe fittings with control valves - 01 lot h) 2.5 sq mm 3 core submersible cable - 100 meter i) 1.5 sq mm 2 core copper cable for light - 100 meter j) Miscellaneous hardware, light & ring stands with other electrical fittings - 01 lot. (Including GST) ASANSOL DIVISION-ENGINEERING/EASTERN RLY

"Supply and fixing PUF Insulated continuous Sqm sandwich panels for walls of total thickness not less than 40 mm and width 1.0 Mtrs. Made out from continue line method on automatic plant. Panel shall have 0.35 mm thick pre coated GI sheet on both side of Polyurethane foam confirming to IS 12436:1988.The Precoated sheet shall be of minimum 240 mpa steel grade confirming to IS 14246:1995 and shall have zinc coating of minimum 120 gsm as per IS: 277:1992, 5- 7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 micron. The PPGI Sheet shall have plastic protective guard film of minimum 25 microns to avoid scratches during transportation. The panels shall be vertically joined together by tongue and groove joints. The Polyurethane foam confirming to IS 12436:1988 And As per PUR 2. The PU Foam shall be self- extinguishing. fire retardant type having minimum density of 40 Kg/Cu.mt. (+,- 2 Kgs) including 0.25 mm thick craft paper edging on both edges. The panels shall be fixed to the steel frame structure with minimum 5 mm thick self tapping GI screws of required length and nos. with minimum spacing of 100 mm c/c. After fixing paneling work all, padel joining fillingby silicon sealant.PUF Insulated wall, Partion wall & Door "

Supply and fixing PUF Insulated continuous Sqm sandwich panels for Roofs of total thickness not less than 30 mm made out from continue line method. Panel shall have 0.35 mm thick pre coated GI sheet on both side of Polyurethane foam with external face being corrugated in shape for GI and PU foam both material. The crest height of the panel shall be of 35 mm minimum with 250 mm c/c pitch. The Pre coated sheet shall be of minimum 240 mpa steel grade confirming to IS 14246:1995 and shall have zinc coating of 120 gsm as per IS: 277, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 micron. The PPGI Sheet shall have protective guard film of minimum 25 microns to avoid scratches while transportation. The roof panels are laid over a frame work of trusses, colums and purlins fixed using 90 mm self drilling bolt with rubber washer including all types of flashings. The Polyurethane foam confirming to IS 12436:1988 And As per PUR

Item Breakup - B-Overall percentage Above/Below/At Par on assessed cost of schedule- B

Item Breakup - B1-Overall percentage Above/Below/At Par on assessed cost of schedule- B1

Directory -ER-HQ-IR-USSOR 2021-2-Ver-2)

Item- 4 Items of schedule-B2 (Items of ER-HQ-IR-USSOR 2021-2-Ver-2)

S No. Item No Description of Item Unit Qty Rate Amount

Hiring of machinery for minor miscellaneous

works for short duration including

operator/driver, fuel, lubricants and

consumable. The contractor shall arrange all

statutory permits as required by rules and

regulations prevailing in the area of work.

Payment shall be made for actual working

1 211201 JCB Backhoe Loaders 3DX Plus or similar Hour 500.00 808.64 404320.00

with minimum 1.10 cum bucket capacity