A/R M/O to NRBs under Division No III Shimla. (SH- Repair of Service Duct adjoining Chambers Of Honble Judges i.e. Repair of Soil Stack, waste water Stack etc. in Floors from Basement to 7th Floor Level in Main High Court Building at Shimla).

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer- in-charge

Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :100 mm Dia

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : Thickness above 10 mm up to 25 mm

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built upstandard tubular sections/ appropriate sections and Colour and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing ACP sheet 4mm thick in panelled and glazed door shutter and partition fixed with self drilling screws etc. complete by the Engineer-in-Charge including carriage of materials within all leads and lifts.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete (i) 200x10 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials within all leads and lifts.125 mm

15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including carriage of materials in all leads and lifts.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete 110mm dia.Type B complete including carriage of materials within all leads and lifts

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete. 75mm dia Type B complete including carriage of materials within all leads and lifts

Providing and fixing PVC single equal branch plain ISI marked etc complete 110 mm dia Type B complete including carriage of materials within all leads and lifts

Providing and fixing PVC single equal branch plain ISI marked etc complete 75 mm dia Type B complete including carriage of materials within all leads and lifts

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc complete. 110 mm dia Type B complete including carriage of materials within all leads and lifts

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc complete. 75 mm dia Type B complete including carriage of materials within all leads and lifts

Providing and fixing PVC degreerbend ISI marked as per requirement including fixing with approved adhesive etc complete. 110 mm dia Type B complete including carriage of materials within all leads and lifts

Providing and fixing PVC degreerbend ISI marked as per requirement including fixing with approved adhesive etc complete. 75 mm dia Type B complete including carriage of materials within all leads and lifts

Providing and fixing PVC door bend ISI marked including fixing with approved adhesive etc complete. 110 mm dia Type B complete including carriage of materials within all leads and lifts

Providing and fixing PVC door bend ISI marked including fixing with approved adhesive etc complete. 75 mm dia Type B complete including carriage of materials within all leads and lifts

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc complete. 110 mm dia Type B complete including carriage of materials within all leads and lifts

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc complete. 75 mm dia Type B complete including carriage of materials within all leads and lifts

Providing and fixing PVC Inspection Piece ISI marked including fixing with approved adhesive etc complete. 110 mm dia Type B complete including carriage of materials within all leads and lifts

Providing and fixing PVC Inspection Piece ISI marked including fixing with approved adhesive etc 75 mm dia Type B complete including carriage of materials within all leads and lifts

P/F PVC P trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. 110 mm complete including carriage of materials within all leads and lifts

Providing and fixing PVC Reducer 150X110mm ISI marked including fixing with approved adhesive etc complete including carriage of materials within all leads and lifts

Providing and fixing PVC Reducer 110X75mm ISI marked including fixing with approved adhesive etc complete including carriage of materials within all leads and lifts

Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing in exposed walls 1620 (20 mm OD) pipe This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge Concealed work, including cutting chases and making good the wall etc 1216 (16 mm OD) pipe including carriage of materials within all leads and lifts including carriage of materials within all leads and lifts.

Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply PPR Union 20m complete including carriage of materials within all leads and lifts

Providing and fixing PVC /GI clamps ISI marked of approved design with steel screws and rawal plugs etc. complete including fixing with approved adhesive etc.complete including carriage of materials within all leads and lifts.110 mm dia.

Making connection of drain or sewer line with existing manhole/Vertical Riser or Stack . complete: For pipes 75 to 250 mm diameter including carriage of materials within all leads and lifts.