ADDN/ALTN/IMPROVEMENT TO OFFICERS SINGLE L/IN ACCN OF E BLOCK AT AF STN AGRA

Amount

Demolition of brickwork or stone boulders masonry built in Cement Mortar including all quins, arches, pillers etc complete all as specified and directed.

Dismantling water tank capacity exceeding 250 ltr but not exceeding 500 ltr and removing to store complete all as specified and directed.

Taking down cement plaster of any description etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

Taking down steel tubing & connections including cleaning for refixing or removal to store for 15mm bore of pipe complete all as specified and directed.

Taking down steel tubing & connections including cleaning for refixing or removal to store for 20mm bore of pipe complete all as specified and directed..

Taking down chowkats or frames with shutters (without taking off shutters form frame) . exceding 1.5 sqm but not exceeding 4 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters form frame) not exceeding 1.5 sqm each complete all as specified and directed.

Taking down shutters exceeding 1 sqm but not exceeding 2 sqm each removing to store complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from steeel/wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads exceeding 1.5 sqm complete all as specified and directed.

Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to stone and rubbish of the premises complete all as specified and directed.

Dismantling cast iron drain pipes of any description complete all as specified and as directed.

Demolition and breaking up 150mm bore drain pipes (Salt glazed ware, AC or reinforced concrete) set in cement mortar and removing and depositing the debris to a distance not exceeding 50mm complete all as specified and directed.

Demolition of concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.

Demolition of plain cement concrete (unreinforced) of any mix / grade in ground floor and pavings (from sunken slab) including removal of debris out off the AF station premises / MOD land etc complete all as specified and directed.

Demolition of brickwork or stone boulders masonry built in Cement Mortar including all quins, arches, pillers etc for portions ordered to be dismantled complete all as specified and directed.

Demolition of cement concrete ( reinforced) of any description in any position not otherwise specially provide for complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed .

M&L for opening out cracks, V section of wall/roof and removing the loose material including filling with cement mortar 1:3 complete all as specified and directed.

M&L for brick work with fly ash bricks straight or curved on plan exceeding 6 m mean radious, old size built in CM (1:6) including demolition of brick work complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces of wall and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 20 mm thick in cement mortar 1:4 (15 mm thick backing coat and 5mm thick finishing coat) on other then fair faces of brick work or concrete surfaces including finished even and smooth without using extra cement with using water proofing compound complete all as specified and directed. Note; Water proofing compound shall be measured and paid seperately.

M&L for rendering 5mm thick in CM 1:4 on fair faces of concrete as in ceiling of slab finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick in CM 1:3 on fair faces of concrete as in soffit ceiling of slab, chajjas finished even & smooth without using extra cement complete all as specified and directed.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square meter, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings and making grooves(of uniform size 15 mm x 15 mm) including putting aluminium channel in groove of required size and taking down of old plaster and removal out of MOD landcomplete all as specified and directed. Note : Making grooves(of uniform size 15 mm x 15 mm) shall be included in quoted rates.

Supply only integral water proofing compound complete all as specified and directed.

M&L for preparing new plastered surfaces and applying two coats of OBD over a coat of alkali resistant priming paint complete all as specified and directed.

Complete removal of existing external decorated treatment from wall/ceilings/RCC surfaces etc with mechanical means/grinder complete all as specified and directed.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L for preparing of new plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M&L for preparation of old plastered decorated surfaces of wall and applying one coat of OBD complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description over 10cm width & girth not otherwise described and applying a coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old plastered decorated surfaces of wall and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old plastered decorated surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old painted steel surface & applying a coat of synthetic enamel paint complete all as specified and directed.

Supply and fix in repair 500 Ltr Rotational moulded polyethene water storage tanks tripal layer white colour(Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F in repair 20mm bore Ball valves, high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms ) complete complete all as specified and directed.

S&F in repair 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

M&L for 15mm bore medium grade G.I tubing with all fittings , fixed complete to walls & ceilings or laid in floors complete all as specified and directed.

M&L for 20mm bore medium grade G.I tubing with all fittings , fixed complete to walls & ceilings or laid in floors complete all as specified and directed.

M&L for refixing old GI steel tubing and including necessary new fitting & connections in new or old position (walls, ceiling, floors etc) 15 mm bore of pipe complete all as specified and directed.

M&L for refixing old GI steel tubing and including necessary new fitting & connections in new or old position (walls, ceiling, floors etc) 20 mm bore of pipe complete all as specified and directed.

Cutting existing 20mm bore steel tubing for alterations or additions in any position without taking down (Each cut measured) complete all as specified and directed.

S&F in repair flushing cistern PVC of 10 ltr. capacity. with dual flushing system, white colour, valveless syphonic action type, , low level, with inlet, ball valve, float and including brackets and connection to pipe etc. and including all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing complete all as specified and directed. Make : Cat Part No- Cera- B1020106 (Sleek Essence Dual Flush) or Hindware- 60001 or Prayag- 508.

S&F in repair vitreous china premium/1st quality wash down water closet floor mounted EWC with P trap white/ivory/off white including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe CP 32mm dia and including all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, including 100mm dia cast iron sanitary connections ,short connections pipe of length upto 600 mm and Cutting holes in or through walls, packing with PCC 1 : 2 :4 complete all as specified and directed. Make Cat Part No- Prayag- 4018/4019, Hindware- 55X36X39 or Cera- S1053108.

S&F in repairs plastic water closet seat cover white/coloured, closed pattern with flat bottom and cover and mild steel hinge chromium plated complete all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. Make : Cat Part No-Prayag-BEA-41, Hindware- F160122 or Cera- F8030301

S&F in repair vitreous china wash hand basin white flat back size 550 X 400 mm excluding taps waste chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F in repair 32 mm bore brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed. Make :- Prayag Cat Part No. BEA-21 or equivalent in Jaquar/Marc/Plumber

S&F in repair 15mm dia hot and cold centre hole wash hand basin mixer, chromium plated, fancy type complete all as specified and as directed . Make : Cat Part No- Prayag - Frost 7750, Jaquar- SOL 61678 or Plumber NTO 5102.

M & L for 18 to 20mm thick granite (any type) work (table rubbed and polished) as in skirting, dado, steps, pillars, jambs, cooking platform, window cills and like in cement mortar 1:4 including pointed with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone over screed bed 15 mm thick in cement mortar 1 : 4 including moulding of edges complete all as specified and directed.

S&F in repairs for brass chromium plated shower rose 100 mm size round with swivel joint including fixing to 15mm dia steel pipe or union complete all as specified and directed. Make : Cat Part No- Prayag- BOS-32, Jaquar- OHS-1709 or Plumber CP- ITP-2401.

M&L for wall mounted mixer assembly, brass chromium plated, comprising of centre outlet tap, double inlets for hot & cold water, centre knob operated L-bend for head shower arrangement, with connecting legs & wall flanges, inlets suitable for 15mm bore connections complete all as specified and directed. Make : Cat Part No Prayag- 6575, Jaquar- SOL 6281 or Plumber CP-CRS 3000LB.

S&F in repair 15 mm 2 way bib taps with flange, cast copper alloy fancy type chromium plated with capstan head screwed down screwed for iron pipe of 15mm bore and fixed complete all as specified and directed. Make: CAT PART No- PRAYAG- 6512, Jaquar- CON-041KN or Plumber- PST-4106

S&F in repair 15 mm Bib taps long body with flange, cast copper alloy fancy type chromium plated with capstan head screwed down screwed for iron pipe of 15mm bore and fixed complete all as specified and directed. Make: CAT PART No- PRAYAG- 6509, Jaquar- Con CHR 047 KN or Plumber CP- PST 2104

S&F in repair angular Stop Cock with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified and directed. Make: PRAYAG CAT PART NO- 6510, Jaquar- CON- 059KN or Plumber CRS-2105

S&F in repair soap dish, brass chromium plated, oval shaped of size 100x50mm (approx), fixed to wall with PVC gully and CP screws complete all as specified and directed.

S&F in repair fancy type towel rod CP 60 cm long between flanges and including all accessories like brackets/screws etc as recommended by manufacturer and fixed in position complete all as specified and directed. Make: PRAYAG CAT PART No- BA- 10S, Cera- F5002103 or Jaquar- CAN 1111SN.

S&F 32 mm bore high density polyethylene pipes (HDPE) of pressure rating 6 Kgf/cm2 fixed complete to walls, ceilings or in floors etc. with all fittings such as ends elbow, union etc., complete all as specified and directed.

S & F PVC connections 15 mm bore size with PTMT nuts of length 450 m complete all as specified and directed.

S&F stainless steel single bowl kitchen sink ISI 304 quality grade,made of 1.00 mm thick stainless steel, glossy finish, for kitchen with plugs washers and CP waste coupling of 32mm dia and including cantilever cast iron brackets, connecting union, or fixed in kitchen platform etc.. including 32mm waste pipe, and making good disturbed portion in white cement/m seal complete all as specified and directed. Make : Prayag Cat Part No- 1216 of Overall Size- 460 X 405 X 178mm, Bowl Size - 405 X 354 X 178mm. Make: Jayna Cat Part No- SBF 01 of Over all size 460 X 405 X 200mm, Bowl Size 410 X 352 X 200mm

S&F grating square fitting of size 150mm made in two parts for smell and mosquito proofing with minimum 25 mm water seal of PTMT. (Minimum weight 85gms) complete all as specified and directed.

S&F Pressed steel frames for doors of size 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S&F 35mm thick IInd class HW rail and style plain framed panelled factory made shutter (Two panel) with lock rail and panel of 9mm BWP,commercial ply or 12mm veneered particle beard with commercial veneering on both faces. The size of rail and stile as per IS :1003 (Part-I) kiln and chemically pressure treated complete all as specified and directed.

S&F for 35mm thick IInd class hard wood glazed and skelton shutters divided into squares with plain chamfered or reounded miltred and related sash bars number to received glass gauze etc edges of framing plain chamfered or reounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.20(a) supplied and fitted to chawkats complete all as specified and directed.

M&L for holdfasts made of 25 x 3mm FI for fixing door frame complete all as specified and directed.

M&L for Block board 18 to 19mm thick , interior grade commertial type fixed with screws to timber frame work/wall for making cubboard door shutters complete all as specified and directed.

M&L for Block board 12 mm thick , interior grade commertial type fixed with screws to timber frame work/wall for shelf in cubboard complete all as specified and directed.

M&L for 0.9 mm thick decorative laminate type 1 of surface finished colour and pattern as approved, fixed with approved adhehive as per manufacturer's instruction complete all as specified and directed.

M&L for 0.9 mm thick decorative laminate type 1 of surface finished white colour and plain, fixed with approved adhehive as per manufacturer's instruction complete all as specified and directed.

S&F Hasp and staple 100 mm wide, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electro galvanised width of flaps 40 mm complete all as specified and directed.

M&L for cutting holes in brick walls exceeding half bricks but not exceeding one brick built in cement mortar or cement lime mortar for inserting holdfasts and making good dismantled portion in CM (1:3) or cement concrete (1:2:4) type B1 as required complete all as specified and directed.

M&L for preparation of new wood surfaces of any description over 10cm width of girth applying two coats of synthetic enamel paint over one coat of pink primer etc complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 250mm length and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed..

S&F aluminium anodized barrel tower bolt extruded section and fixed 200mm long all complete all as specified and directed.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F extruded aluninum alloy handles, fabricated type anodized 150mm long fixed complete all as specified and directed.

S&F butt hinges, medium weight, cold rolled mild steel, of size 100mm complete all as specified and directed.

S&F mild steel 375 mm ordinary rat tail rod pettern springs including roller and roller plate complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F Kicking plates for doors, 1.00 mtr X 0.20 mtr of size, made of galvanised iron sheet of 1mm thick, fixed with galvanised screws complete all as specified and directed.

S&F powder coated anodised aluminium sections of required size for door, windows frames ventilator with one or more rebates including of required size jointing cleats, screws sash fasteners, rollers to move shutters, plug for fixing with walls, columns etc complete all as specified and directed.

S&F powder coated anodised aluminium door shutters, aluminium sections weighing 0.55 kg /m including neccessary joining cleats , glazing clips , rubber packing , anodised aluminium snap beading ,screws, rollers and locking assembly, handles two of each shutters , hinges as required complete all as specified.etc. complete all as specified and directed.

S&F powder coated anodised aluminium ventilators and window shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg /m including neccessary joining cleats , glazing clips , rubber packing , anodised aluminium snap beading ,screws, rollers and locking assembly, handles two of each shutters , hinges as required complete all as specified.etc. complete all as specified and directed.

S&F steel windows with side hung shutters (glazed and gauzed) including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars,dovetailed or welded, including for painting with one shop coat of zinc chromate primer complete all as specified and directed.

S&F framed works such as grills gratings etc, with ends of bars shoulders and or reveted, or forged into spike framed guard bars barred iron doors ladders framed blusters, walk way railing , frame work of water tank and similar work con- forming Fe.290 Gde-E-165 complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint including one coat of red oxide complete all as specified and directed.

S&F sheet glass 4.00 mm thick and glazing complete with beads fixed with screws in square exceeding 0.5 sqm in each pane complete all as specified and directed.

S&F sheet glass ordinary quality 3.00 mm thick and glazing with oil putty or aluminium/rubber beading in squares not exceeding 0.5 sqm in each pane complete all as specified and directed.

S&F figured glass, pin-headed type 3.00 mm thick and glazing with oil putty or aluminium/ rubber beading in squares not exceeding 0.5 sqm in each pane complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

Repairs to shutters of any description not exceeding 1 sqm each easing & adjusting without taking down complete all as specified and directed.

Repairs to shutters of any description easing & adjusting without taking down area exceeding 1 sqm but not exceeding 2 sqm complete all as specified and directed.

S&F solid PVC solid door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling and fixing in opening with stainless steel screws of required size complete all as specified and directed.

S&f factory Made Solid PVC Moulded Door Shutter,with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing. Including 3 Nos of stainless steel 100 mm size hinges, 2 Nos of aluminium 100 mm size handles, 2 Nos of aluminium tower bolt 100 mm size all as directed

M&L for coloured non skid ceramic tiles 7 to 8 mm thick joint less (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

M&L for glazed ceramic designed coloured tiles 350 x 450 x 7 mm thick on vertical surface such as dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for 10 mm thick Vitrified Ceramic tiles dark shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

M&L for 20-25mm thick machine cut kota stone slab flooring laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

M&L for 20-25mm thick machine cut kota stone in riser of steps, skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed.

Supply and fixing of 100 mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall with MS clamp complete all as specified and as directed.

Supply and fixing of 75 mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall with MS clamp complete all as specified and as directed.

Supply and laying of 100 mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and as directed.

Supply and laying of 75 mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and as directed.

Fixing only cast iron soil waste and vent pipes of 100mm bore in any lenth with or without ears with cement joints fixed to walls complete all as specified and as directed Note; Serviceable pipe shall be obtained from item No. 11 for reused.

Fixing only cast iron soil waste and vent pipes of 75mm bore in any lenth with or without ears with cement joints fixed to walls complete all as specified and as directed Note; Serviceable pipe shall be obtained from item No. 11 for reused.

Demolition of concrete in ground floors and pavings exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed

M&L for cutting holes into or through cement concrete slabs, chajjas, etc.of superfacial area not exceeding 100 sqcm for inserting pipe as in sunken portion to faciliatate efficient drainage including packing with PCC 1:3:6 after inserting pipe complete all as specified and as directed .

Supply and fix 50mm bore GI pipe, medium grade in isolated length of 400mm long inserting into wall surfaces with 100mm projecting from the external face of wall as in water draining spout complete all as specified and directed.

Supply and fix in repair cast Iron floor trap, 75mm dia out let with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate complete all as specified and as directed .

Supply and fix PVC (SWR) multi floor trap 75 mm with grating including jointing with solvent cement complete all as specified and as directed

Supply and fix CI bends of 100mm dia fitted with oval access doors complete all as specified and as directed .

Supply and fix CI bends of 75 mm dia fitted with oval access doors complete all as specified and as directed .

Supply and fix CI branch pieces "T" or "Y" type 100mm dia complete all as specified and as directed.

Supply and fix CI branch pieces "T" or "Y" type 75 mm dia complete all as specified and as directed.

Supply and fix in repair CI cowl of 100mm dia complete all as specified and as directed.

Supply and fix in repair CI cowl of 75 mm dia complete all as specified and as directed.

Supply and fix in repair cast iron Nahani trap of 100mm dia including jointing to waste pipe fixed with cement concrete type 1:2:4 type B1using 20 mm graded stone aggregate complete all as specified and as directed .

M&L RCC 1:2:4 ,type B0 using 12.5 mm graded aggregate in slabs supported on walls , beams, columns and similar work etc complete all as specified and as directed.

Use and waste formwork to soffits of suspended slab, slab supported on walls, columns, beams and similar work not exceeding 200 mm thick (Horizontal or sloping) , rough finished surface of complete all as specified and directed.

M & L for TMT bars 10 mm dia and over, cut to length bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality confirming to TMT bars complete all as specified and directed.

All all per Item No 122 above but 6 mm to 8 mm dia, quality confirming to Fe 410-S or Fe 410-0 complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed .

M&L for 75mm thick plain cement concrete type C-2 , 1:3:6 using 40 mm graded stone aggregate as in plinth protection complete all as specified and directed .

Material and labour for rendering in CM (1:4),15mm thick on wall of sunken floor suraces finish the surface even and smooth without using extra cement mixed with water proofing compound complete all as specified and directed . Note : WPC will be measured and paid in supply only.

Materials and labour for water proofing treatment to sunkun floors with the following courses of treatment :- (a) Apply first layer of slurry of cement @ 0.488 kg/sqm mixed with acrylic polymer modified cementitous composite compounds @ 0.126 kg/sqm all as specified. (b) Apply second layer of slurry of cement @ 0.242 kg/sqm mixed with acrylic polymer modified cementitous composite compounds @ 0.253 kg/sqm including cleaning the surfaces and all as specified. (c) Apply 200 micron thick polythene film pasted with the help of adhesives shall be provided over treatment all as specified. Note :- The slope of slab shall be 1:20 towards the corner of outer walls and GI pipe of 50mm dia (medium grade) be inserted at corner projecting out side 10 cm which should be measured and paid separately,

Material and labour for cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in filling in sunkun floor complete all as specified and directed.

M & L for cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in sunken floor for correction of slope etc complete all as specified and as directed.

M&l for cement concrete in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per manufacturers instruction, complete all as specified and directed.

S&F Solid PVC wall lining consisting of 5mm thick coloured PVC sheet (as approved) inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

Taking down eaves gutters and rain water pipe (any size or pattern ) including all fittings , heads, shoes, bends, swan-necks etc. complete all as specified and directed.

S&F PVC SWR pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repairs harrison curtain rails, 20 mm dia, mild steel, chromium plated with fixing brackets and domes, stops, rollers etc. complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed.

S&F rolled sections with ERW or induction butt welded MS tubes black conforming to IS 1161-1979 grade St 240. as in main and cross beam, hip and jack rafters, prlins when connected to common rafers, and running rails & guides for sliding door, fixed with angle cleats or other connecting plates as directed , conforming to IS 1161-1979 grade St 240 complete all as specified and directed.

Extra labour only for making steel member under item No 137&138 above in curved shapes as directed by engr-in-charge complete all as specified and directed.

S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., not exceeding 10 kg each brackets, conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed. Note;Brackets over 10 kg each to be measured under `Structural Steel'.

S&F Plates (plain or chequered) channels. Fe 410-W (Gde E-250) quality B , Square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

S&F Mild steel bolts,exceeding 12 mm but not exceeding 20 mm, purpose made, with hexagonal or square head one end and screwed the other, or screw both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 30cm long complete all as specified and directed.

S&F 6.00 mm thick Polycarbonate sheets of superior quality in semi circle shape on roofs of desired colour and fixed with aluminium metal flat/angle/tee sections including rubber beadings and silicon water proofing sealent jelly for joining the sheets together and self tightening screws of reputed quality and make complete all as specified and directed.

M&L for scraping out loose mortar/concrete by chiseling/ wire brushing complete and applying rust removing solution (rebaklene solution) to exposed corroded reinforcement and applying a coat of epoxy primer (Nitozink primer from M/s Fosroc or equivalent as approved by GE) as per manufacturer instructions providing and fixing of wire mesh of weight 2.5 Kg per Sqm and apply 25 mm average thickness in CM (1:4) mixed with liquid integral water proofing compound (complast 'X' recommended by the manufacture with gunitting machine at a pressure not less than 5 Kg/Sqcm finally rendering 10mm thick plaster in CM (1:4) using liquid integral water proofing compound (complast 'X' 421 i.e. from M/s Fosroc and Nitobound AR from M/s Fosroc or equivalent as approved by GE) in the proportion recommended by the manufacture including three coat of white wash complete all as specified and directed.

S&F Mild steel, plain, black sheet 1.25 mm thick in crumple joints, wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.

S&F aluminium composite sheet exterior grade 3mm thick for wall panelling work of any colour including aluminium frame work of section size 50mm X 37mm X 1.50mm thick fixed to walls in vertically or horizontally with approved solution/self tightening screws to fix panels. Composite sheet of reputed quality and ISI marked complete all as specified and directed .

M&L for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. complete all as specified and directed.

M & L for treatment of soil under existing floors (internal) using chemical emulsion one litre per hole, at 300mm intervals iincluding drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors, complete all as specified and directed .

M & L for grinding, rubbing and polishing of existing kota stone floor with beeswax polish by using mechanically , complete all as specified and directed .

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft loose type of soil, complete all as specified and directed.

M&L for 75mm thick plain cement concrete type D-2 1:4:8 (40 mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L Machine pressed coloured precast conctete interlocking paver block with grey cement and with pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade complete all as specified and directed.

Taking up and down old GI tubing with all fittings of size 25 mm dia. complete all as specified and directed. Note;Necessary earth work will be measured and paid seperately.

Supply, fixing and laying GI water tubing 25 mm bore medium grade ISI marked with all required fittings such as bends, elbow, tees, short pieces, connector, check nuts and threading complete all as specified and directed.

Excavation in trenches not exceeding1.5 M in width and not exceeding 1.5 M in depth for laying of cables and getting out in hard/dense soil etc complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layer not exceeding 25 cm thick using soil complete all as specified and directed.

Removing excavated surplus soil to a distance not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed.

S & F in replacement of existing unserviciable Gun metal gate valve ISI marked with iron wheet head screwed both ends for pipe of size 25 mm complete all as specified and directed.

M&L for Salt glazed stone ware drain pipes grade 'A' internal dia of pipe 150 mm laid in trenches and jointed in cement mortar 1:1 complete all as specified and directed.

M&L for cement concrete bed to drain pipes including packing under and completely surronding pipes after they are laid and tested in cement concrete 1:3:6 ,type C2 (using 40 mm graded stone aggregate) bore of pipe is 150 mm complete all as specified and directed.

S & F in repairs salt glazed stone ware gulley traps, square or round mouthed type 'P' of size 180 mm x 150 mm complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc (Inner girth only measured) complete all as specified and directed.

Demolition of RCC Manhole covers, slabs etc of any description and in any position not specifically provided for complete all as specified and directed.

M&L for precast cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) as in manhole/drain cover of any section with plain fair faces including chamfers, weatherings, throating etc and setting in cement mortar 1:4 complete with joints to match complete all as specified and directed.

Cutting into existing manholes for connect in new drains making good to pipe and rendering cutting out existing benching for and forming branch channel ½ round or ¾ section in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required for 150mm complete all as specified and directed.

M&L for light/Fan/Exhaust fan point wiring in concealed conduit complete with ISI marked 1.5 Sqmm PVC insulated unsheathed multistranded single core cable with copper conductor (FRLS) 1100 volts grade drawn through and including PVC rigid conduit not less than 20 mm dia ISI marked as required at site including conduit accessories such as Junction Boxes, Inspection Covers etc, modular box ISI marked suitable for modular switches & sockets of necessary modules as per site requirement including modular plates & covers for switches sockets, regulators etc. including providing of 1.5 Sqmm PVC insulated FRLS multistranded unsheathed copper conductor as earth continuity conductor and connecting to common earth dolly including cutting chasesing and making good disturb surface area complete all as specified and directed. Note- Rates include the cost of modular plate modular boxes and covers of suitable modules as required at site.

All as per Item No 167 above but for 3 pin 5 amps socket outlet independent board complete all as specified and directed.

All as per Item No 167 above but for 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.

M&L for point wiring with 2.5 sqmm single core 1100v grade FRLS PVC insulated unsheathed multistranded copper conductor with in and including PVC concealed conduit medium grade with all fittings including modular boxes, plate and cover suitable for an independant 6 pin 15/16 amps socket outlet ,including 2.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to comman earth dolly including cutting chases in walls / floors for concealed conduiting and making good disturbed surface area to match with the adjoining surface complete all as specified and directed. Note- Rates include the cost of modular plate modular boxes and covers of suitable modules as required at site.

All as per Item No 170 above but using 4 sqmm copper conductor wire with 4 sqmm earth wire for Air Conditioner complete all as specified and directed.

S&F Modular switch single pole, one way 6 Amps one module complete all as specified and directed.

S&F Modular switch single pole, one way 16 Amps one module complete all as specified and directed.

S&F Modular socket 6 Amps multipurpose 2 in 1- 2/3 pin combined 2 module complete all as specified and directed.

S&F Modular socket 6/16 Amps multipurpose 2 in 1 -2/3 combined 2 module complete all as specified and directed.

S&F in replacement of ceiling rose 65 x 50mm three terminals complete all as specified and directed.

S & F modular type T V Co- axial socket , 1 Module including junction box , sheet cover and frame complete all as specified and directed.

S & F modular type Telephone socket , 1 Module including junction box , sheet cover and frame complete all as specified and directed.

S & F concealed non metalic PVC conduit 20 mm bore medium grade totally for routing wire for TV/Telephone with all fittings (ISI Marked) complete all as specified and directed.

S & F in replacement of Modular Switch 2- way, 5/6 amps flush type 230 volts complete all as specified and directed.

S & F in replacement of Modular bell push flush type 5 amps SP 240 volts complete all as specified and directed.

S & F in replacement of Modular switch single pole, one way 6 Amps one module all complete all as specified and directed.

S & F in replacement of Modular switch single pole, one way 16 Amps one module complete all as specified and directed.

S & F in replacement of Modular socket 6 Amps multipurpose 2 in 1- 2/3 pin combined 2 module complete all as specified and directed.

S & F in replacement of Modular socket 6/16 Amps multipurpose 2 in 1 -2/3 combined 2 module complete all as specified and directed.

M&L for taking down and re-fixing of serviceable bell ding dong AC , 230 VOLTS, single pole complete all as specified and directed.

S&F in replacement of bell ding dong AC , 230 VOLTS, single pole complete all as specified and directed.

S&F in replacement of fan modular regulator, electronic stepped type 5 stage speed regulation, ISI marked complete all as specified and directed.

S&F in replacement of modular cover plate with frame 1/2 module complete all as specified and directed.

S&F in replacement of modular cover plate with frame 3 module complete all as specified and directed.

S&F in replacement of modular cover plate with frame 4 module complete all as specified and directed.

S&F in replacement of modular cover plate with frame 6 module complete all as specified and directed.

S&F in replacement of modular cover plate with frame 8 module complete all as specified and directed.

S&F in replacement of modular metal flush box sutable for 1/2 module complete all as specified and directed.

S&F in replacement of modular metal flush box sutable for 3 module complete all as specified and directed.

S&F in replacement of modular metal flush box sutable for 4 module complete all as specified and directed.

S&F in replacement of modular metal flush box sutable for 6 module complete all as specified and directed.

S&F in replacement of modular metal flush box sutable for 8 module complete all as specified and directed.

S&F in replacement of Wall/surface mounted type inbuilt sensor based smart LED auto dimmable light fitting batten type, dimming from 100% of rated wattage to 30% on sensing of movement complete with LED 1x 20 watt (4 feet long), extruded aluminium body with heat sink provided for efficient heat dissipation and integrate electronic drive complete with all accessories internally pre-wired and including connecting up with 3 core twisted flexible copper conductor cable complete all as specified and as directed. Make - WIPRO CAT REF D532065/BAJAJ CAT REF -BCLSB20WH

M & L for taking down carefully existing serviceable Tube light fitting any type/ wattage for re-use/ refixing at same position or any other location after making connection with 3 core copper flexible cable of size 23/.0076 from ceilling rose/PVC connector to light fittings complete all as specified and directed at site.

S&F in replacement of old unserviceable tube light fitting with energy saving decorative batten type 10 watt energy efficient tube light fitting (2 Feet) highly durable surface mounted LED batten constructed of fire retardent engineering grade extruded plastic and decorative end caps with all accessories prewired and making connection with 3 core copper flexible cable of size 23/.0076 from ceilling rose/PVC connector to light fittings complete all as specified and directed. Make- ORIENT Cat part No-LBLN-10-C-SQ/Phlips cat part- BN021LED12S6500PSUGR, HALONIX Cat part no HLTLD-04-10-CW

S&F in replacement of old unserviceable Lithium based Energy Efficient integrated Solar bldg security light of 20 Watt in single FRP body with dyly polylurethane coating (Camouflage color), encases with Monocrystalline solar PV Panel of 53/55 Wp, litium battery 11.1/12.8V, 28.6AH with inbuilt BMS, IP65 high brightness W LED 160-180Lm/watt) lamp with Aluminium reflector for batter light distribution , CRI>70, Colour Tempeture 57000K-65000K micro controller based charge controller cum driver automatic dimming function(First four hours at full brightness & rest of the at lower light level with PIR motion sensor), dust to dawn operation suitable to working tempreture -10C to +55C , wight more than 12-14 Kg with suitable size of GI bend pipe, adjustable MS clamp suitable for pole/wall mounting etc, complete all as specified and directed. Make - Axxon Tech Industries/Okaya Power Pvt Ltd.

M&L for taking down carefully existing ceiling fan for greasing / oiling of ball bearings / bushes and making it for smooth and noise free operation and painting with Hi-Gloss synthetic enamel paint of approved shade by spray painting after filling cavaties and re-fixing after providing new fan clamp, nuts/bolts, washers, as required and provision of 3 core copper flexible cable of size 1.0 Sqmm from ceiling rose to fan connector complete with writing of MES No. on the fan surface complete all as specified and directed..

S&F Anti Sucide fan rod (12'' ) white MS pipe zinc plated , 19mm OD 1.8+/- 0.05 mm thick , spring set grade 3 carbon steel material zinc plated , MSME tested for performance test and opening at impact load of 22kgf+ and spring " hidden in the piper will expand to about 1 mtr or more, complete all as specified and directed. Make- Gold Life or any other equilevent as approved by GE.

M&L dismantling and taking down old serviceable geyser and re-fixing the same after repair of bldg any type / capacity after necessary disconnection of electrical wires etc. complete all as specified and directed.

Supply and fixing electric water heater, storage type ABS body with stainless steel inner tank and heating element upto 2 KW capacity, 25 litre, BEE 5 star rating complete with all accessories such as safety valve, thermostate, connection pipe, etc. complete all as specified and directed. Make : Crompton model SOLARIUM NEO/ Bajaj model CALENTA DIGI/Havells model No. GHWAPUTPI025

M&L for cutting wall of any type, making hole for fixing of exhaust fan size 250-300mm sweep (round/squire) and making good surface with fine plastring, finishing and colouring with existing colour macthing complete all as specified and directed.

S&F exhaust fan 250 mm sweep PVC body, AC, Single phase, 230 volts complete with louvers shutters and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan complete all as specified and directed.

Dismantling of existing meter panel board removing existig energy meter keeping safe custody and, Supply, installation, testing and commissioning of indoor type wall mounting size min (1280X 775X245), Polycarbonate CPRI approved OEM made Meter Panel. The panel shall be made of modular POLYCARBONATE THERMOPLASTIC ENCLOSURES which should be UV resistance in accordance with IEC 61439-1, clause 10.2.4: The panel type wall mounted on mounting structure RAL 7016. The meter panel should be anti-acid & anti corrosive & fully transparant Door foor meter vision. Degree of protection against mechanical load should be IK08 (5 Joule) in accordance with IEC 62262. The manufacturer of panel shall submit a copy of CPRI TEST REPORT IN POLYCARBONATE only . DEGREE OF INGRESS PROTECTION IP65 IN ACCORDANCE WITH IEC 60529. The gasket should be internally embedded made of polyurethane and enclosure make . The manufacturer of board/panel SHALL submit a copy of TYPE TEST REPORT of a board made out of Polycarbonate thermoplastic panel in accordance with IEC 60439-1. The CPRI test report shall have mention of following tests performed and passed out satisfactorily: Temperature Rise, Dielectric Properties, Short circuit withstand current – Rated peak & short time withstand current and Rated Conditional Short Circuit Current, Effectiveness of Protective Circuits. The board manufacturer must submit the copy of type test reports for Polycarbonate Thermoplastic Board only. Test Reports submitted of other material of construction like MS, SS will not be applicable.. The panel should passed glow wire test 960oC in accordance with 60695-2-11 flame retardant and self-extinguishing complete all as directed with and incl the following (a) Provision for existing electric energy meter - 08 nos in separate chamber with locking arrrangement. (b) Four pole MCCB 100 Amps with breaking capacity 25 KA having fixed thermal and fixed magnetic release and spreader link at both incoming and incomming side - 01 No. (c) MCB DP 32 Amp 10 KA , C Curve - 8 Nos (To be connected with 8 Nos Meters) (d) MCB DP 06 Amp 10 KA, C Curve - 1 No (For common lighting + Bldg Security Lights) (e) Ten Nos terminal blocks provided for output supply. (f) MCCB/MCB Nos Operated by flip Cover, LED Indicating lamp - 03 Nos. (g) Internal wiring with 1100Volt grade 6.0 Sqmm FRLS PVC insulated multiflexible copper wire of sizes duly crimped with copper lugs of suitable size & type . Note : Re-fixed the energy meter in this new meter cabinet including all necessary electrical connection.

All as per Item No 209 above but for size 980x775x245 mm to be connected 6 nos meter complete all as specified and directed.

S&F in replacement of sheet metal enclosure distribution board, single pole and neutral, AC, 240 volt, 08 way, double door with 100 Amp rated copper bus bar and metal door with IP - 43 and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

S&F in replacement of MCB single pole 240 volts, 'C' curv of rating from 6 to 32 amps, with rupturing capacity 10 KA,including providing thimble for out going cables complete all as specified and directed.

S&F in replacement of MCB SPN 240 volts, 'C' curv of rating from 6 to 32 amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed..

S&F sheet metal single pole and neutral enclosure with socket, plug top complete with one single pole MCB of 20 Amps, 240 volts complete all as specified and directed.

M&L for removal of existing old unserviceable earthing complete and providing new earthing with galvanised steel earth plate electrode, 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to galvanised iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point, GI tubing 15 mm bore medium grade protection pipe, GI watering pipe 20 mm bore light grade with funnel and wire mesh, charcoal, salt complete all as per SSR with PCC chamber, 50mm thick RCC cover in 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with 8mm dia TMT bar @ 80mm c/c both way including earth work in any type of soil, removal of surplus soil to a distance n.exc 50 m and connecting, testing on completion all as shown on electric plate No 03 of SSR -2009 Part I complete all as specified and directed. Note: Excavation and earth work is deemed to be included in the rates quoted.

Sethi Brothers

M/s Laxmi Associate

garg construction company

GUPTA ENGINEERING WORKS

M/s Shrangi Rishi Construction

M/S Hema construction