Provn of Rooms for repair Labs at various locations at 14 BRD, AF under GE (AF) Borjhar

Amount

M&L for point wiring with 1.5 Sqmm PVC FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC concealed Conduit pipe of suitable size as per site reqmt, ISI marked with all accessories such as tee, bend, joint cover including sunken type pressed steel boxes for mounting of switches/ sockets/regulator etc and PVC FRLSH insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead connected to common earth dolly complete all as specified and colour coding of cables such as (i) Phase - Red (ii) Neutral – Black, and (iii) Earth – Green. Note : (i) Rate for cutting and chassing of wall for lying of conduit pipe included in the above quoted rates. (ii) After lying of conduit pipe, the surface of wall should be well finished with plaster work and two coats of white wash to match the existing colour of wall.

For one light point/fan Point controlled by one way switch.

For one 5 Amp independent socket controlled by one switch.

For one 5 Amp socket controlled by one way switch on same board.

All as per item Serial No 1.00 here-in-before but for power point wiring with 4 Sqmm FRLS PVC insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 4 Sqmm FRLS PVC insulated, unsheathed, copper conductor, stranded 1100 volt grade cable for earth continuity.

Material and labour for sub main wiring with 2 x 6 Sq mm PVC insulated single core unsheathed stranded copper conductor drawn in and including PVC concealed conduit pipe including continuous running earth wire by 6 Sqmm PVC unsheathed single core stranded copper conductor connected to common earth dolly including plastic terminal boxes completed all as specified and directed by Engr in Charge.

Material and labour for sub main wiring with 4 x 10 Sq mm PVC insulated single core unsheathed stranded copper conductor drawn in and including PVC concealed conduit pipe including continuous running earth wire by 10 Sqmm PVC unsheathed single core stranded copper conductor connected to common earth dolly including plastic terminal boxes completed all as specified and directed by Engr in Charge.

Supply and fixing switch modular type 1 module 6/10 Amp complete all as specified and directed by Engr in charge.

Supply and fixing socket outlet 3 pin, 10 Amp modular type 02 module complete all as specified and directed by Engr in Charge. .

Supply and fixing switch modular type 1 module 16 Amp complete all as specified and directed by Engr in charge.

Supply and fixing socket outlet 3 pin, 16 Amp modular type 02 module complete all as specified and directed by Engr in Charge.

Supply and fixing modular box of 1/2 module complete all as specified and directed by Engr in charge.

Supply and fixing modular box of 3 module complete all as specified and directed by Engr in charge.

Supply and fixing modular box of 6 module complete all as specified and directed by Engr in charge.

Supply and fixing modular box of 8 module complete all as specified and directed by Engr in charge.

Supply and fixing modular box of 1/2 module complete all as specified and directed by Engr in charge.

Supply and fixing modular white cover plate with frame of 3 module complete all as specified and directed by Engr in charge.

Supply and fixing modular box of 6 module complete all as specified and directed by Engr in charge.

Supply and fixing modular white cover plate with frame of 8 module complete all as specified and directed by Engr in charge.

S & F Single pole and neutral enclosure with a two pin and earth plug and socket 240 V 20 A complete with one single pole MCB all as specified and directed by Engr-in-Charge

Supply and fixing ceiling rose surface bakelite 65 x 50 mm three terminal.

Supply & Fixing MCB DB double door SPN 8 way 240 Volt complete.

Supply & Fixing MCB DB double door SPN 4 way 240 Volt complete.

Supply & Fixing MCB DB double door TPN 4 way 415 Volt complete.

S&F MCB TPN 100 Amp 415 Volt C Curve with 10 KA breaking capacity complete all as specified and directed by Engr in Charge. (For Main incommer)

S&F MCB TPN 63 Amp 415 Volt C Curve with 10 KA breaking capacity complete all as specified and directed by Engr in Charge. (For Main incommer)

S&F MCB SPN 40 Amp 230 Volt complete all as specified and directed by Engr in Charge. (For Main incommer)

S&F MCB SP 6 to 32 Amp 230 Volt complete all as specified and directed by Engr in Charge.

Supply & Fixing in replacement of LED light fittings 1 x 22 watt, 220 v AC decorative box type with driver holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing ceiling fans complete with blades, down rods, with modular electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)Supply and fix ceiling fans, complete with three blade, down rod, accessories complete all as specified and directed by Engr-in-Charge

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete incl taking down old unserviceable exhaust fan and deposited to E&M store yard complete all as specified and directed by engineer in charge.

S&F building security light LED fitting 35 watt , 230 Volt AC with IP 66 protection with aluminium housing pressure die cast housing having heat dissipating fins for large surface area, matt finish powder coated in grey paint, toughened glass in the front and peanut lens for batwing light distribution, CCT 5700, CRI > 70, power factor > .95, IP 20, surge protection 4 KV internal, integral electronic driver with output short circuit protection and open circuit protection, surge voltage protection and fix on wall on existing bracket and connecting up to ceiling rose with three core copper conductor cable of overall sheathed size 2.5 Sqmm which shall be passed through PVC flexible conduit complete.

M&L for hot dip galvanised (as per BS EN ISO 1461 1991) brackets of 40 mm dia (medium grade), 1.5 m long bend to shape for fixing LED type street light luminaires, on pole through MS Clamp, nut, bolt & washers incl taking down old one complete all as specified and directed. Note : Any welding works related to bracket should be carried out at the factory premises of the manufactureres. Make : Nezone/ Jindal/ Tata

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600x 6mm burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edged of the plate not less than 1.5 mtr below normal ground level, connected to galavanised iron earth lead by means of bolt, nut, check nut and washer of galavanised iron steel wire 4mm as earthing lead as shown in Electrical Plate No 4 of SSR Part I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft/ loose soil, earth pit in PCC 1:3:6 type C1 using 20mm stone aggreate, funnel, 20mm dia GI med grade water pipe, 40mm dia GI light grade earth lead protection pipe, CI frame and cover, wire, copper lugs, wire mesh, charcoal or coke and common salt in alterative layer all around the earth electrode compacted thickness 15 cm including excavation and earth work pit cover including disposal of surplus soil to a distance not excessding 50m, complete testing on completion all complete as shown in electrical plate no-4 of SSR part No1 all as directed.

Excavating in trenches manually not exceeding 1.5m wide and not exceeding1.5 mtr in depth/ width for laying under ground cable / foundations and getting out in soft / loose soil all as specified and directed. Note : During excavation no mechanical excavator is permitted at site, contractor will do the excavation through manually.

Returning, filling in incl spreading, leveling, watering and well ramming in layers not exceeding 25cm all as specified and directed.

Removing of surplus excavating material not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as specified and directed.

M&L for sand cushioning for protection of lT under ground cable with screen wash sand and punning to proper reqd cover all as specified and directed.

M & L brick protection with old size sub class ‘B’ brick for PVC under ground cable protection in trench laid width wise on LT Cable laid dry and flat joining each other with gap between adjacent brick not exceeding 10mm over LT under ground cable all as specified and directed.

Supply layin testing cable XLPE insulated screened PVC bedded galvanised steel strip or wire armored electric power cable heavy duty strandard aluminium conductor 1.1KV volt grade of size 50 sqmm 3.5 core complete all as specified and directed by Engr in charge.

M&L for tubes 50 mm bore light grade galvanized with all fittings laid in trenches/ wall/ pole through MS flat (25X3mm), nut, bolt & washers [ where ever reqd ] of proper sizes for protection cables complete all as specified and directed. Make : Nezone/ Bansal/ Jindal

Surface dreesing in soft/loose soil not exc 15cm deep complete all as specified and directed by Engr-in-charge.

Excavating over areas, in soft/loose soil not exc 1.5 m deep and getting out in for foundation complete all as specified and directed by Engr-in-charge.

Excavating over areas, in soft/loose soil exc 1.5m and not exc 3 mtr deep and getting out in for foundation complete all as specified and directed by Engr-in-charge.

M&L for Plain Cement concrete 1:4:8 type D-2, using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed by Engr-in-charge.

S&F Mild steel bars (TMT bars) 10 mm and above, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed by Engr-in-Charge.

Ditto as per item Serial No. 43.00 here-in-above but 5mm dia and over upto and including 12mm dia in stirrups, spacers and binders complete all as specified and directed by Engr-in-charge.

M&L for Formwork to flat sides of concrete foundations, footings, bases of columns, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter with fair finished surface complete all specified and directed by Engr-in-charge.

M&L for formwork to sides of pillars, posts, struts, piers, columns of shape square, rectangular or polygonal with fair finished surfaces complete all specified and directed by Engr-in-charge.

M&L for Formwork to edges of concrete flats, breaks in floors, window cills, openings in concrete walls, floor and roofs not exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon?tal or sloping and similar work exc 10cm but not exc 20cm wide with fair finished surfaces complete all specified and directed by Engr-in-charge.

Ditto as per item Serial No. 47.00 here-in-before but exceeding 5 Cm and not exceeding 10cm wide with fair finished surfaces complete all as specified and directed by Engr-in-charge.

M&L for Formwork to flat soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) with fair finished surfaces complete all as specified and directed by Engr-in-charge.

M&L for Formwork to flat sides and soffits of floor or roof beams, beam haunch?ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. With fair finished surfaces complete all as specified and directed by Engr-in-charge.

M&L for Formwork to flat soffit surfaces of chajjas, troughs and similar items in?cluding edges With fair finished surfaces complete all as specified and directed by Engr-in-charge.

M&L RCC 1:2:4, type B1(using 20mm graded aggegate) as in Foundations, including rafts, footings, plinth beams; etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed by Engr-in-charge.

M&L RCC 1:2:4, type B1(using 20mm graded aggregate) nominal mix as in Columns, pillars etc complete all as specified and directed by Engr-in-charge.

M&L RCC 1:2:4, type B1 (using 20mm graded aggregate) nominal mix as Slabs supported on walls, beams and columns in floors, roofs, etc. complete all as specified and directed by Engr-in-charge.

M&L RCC 1:2:4, type B1 (using 20mm graded aggregate) nominal mix for Beams, cantilevers, lintels over 1.5m span etc. complete all as specified and directed by Engr-in-charge.

M&L RCC 1:2:4, type B1 (using 20mm graded aggregate) nominal mix for chajjas complete all as specified and directed by Engr-in-charge.

M&L for brickwork with subclass 'B' Bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed by Engr-in-charge.

M&L for approved soil filling including raising (or lowering) earth, spreading in layers not exceeding 300mm thick watering, ramming/ rolling and finishing to revised size, shape etc. not exceeding 1.5m high from base complete all as specified & directed by Engr-in-Charge. Note : Approved soil shall be brought from outside of MoD land. For payment purpose OGL and MGL shall be submitted duly signed with GE, AGE & Contractor with quantification sheets.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in-charge.

M&L for 150 micron Polythene film, black, laid in floors complete all as specified and directed by Engr-in-charge.

M&L for 75mm thick cement concrete 1:4:8, type D-2, (using 40mm graded stone aggregate) finishing surfaces of concrete in sub-floors, sub-bases, etc. even and rough to receive the topping layer complete all as specified and directed by Engr-in-charge.

M&L for rendering 15 mm thick in cement mortar 1:4 to other than fair faces of brick or concrete surfaces with WPC (as per manufacturer instruction) finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

M&L for rendering 10 mm thick in cement mortar 1:6 to fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

Supply only WPC and apply as per manufacturer instruction complete all as specified and directed by Engr-in-charge.

M&L for rendering 5mm thick on concrete surfaces in CM 1:3 on ceiling, finished even and smooth complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 18-20 mm thick over 20mm thick cement screed base laid for floor finishes in CM (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-charge.

M&L for Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over 12 mm thick cement screed in CM (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-charge.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash over a coat of primer as per manufactured instructions complete all as specified and directed by Engr-in-charge. Note : Rates includes necessary scafolding required for execution of work

M&L for preparation of newly plastered surfaces of walls and applying two coats of Oil bound distemper over a coat of primer as per manufactured instructions complete all as specified and directed by Engr-in-charge.

M & L for preparation of new undecorated plastered/ concrete surface of wall/ roof and applying two coats of weather proof Acrylic emulsion paint (exterior grade) in camoflauge pattern on Wall, including nesessary scafolding over one coat of weather coat primer all as specified and as directed by Engr-in-charge.

M & L for cleaning of all loose dirt & dust from roof surfaces and applying roof treatment as under:- (a) 10mm thick plastering in CM (1:4) using 100 % coarse sand on roof/ parapet walls with WPC @ 3% BY WEIGHT OF CEMENT (b) Applying coat of bituminoios primer @ 0.10 litre/ Sqm on prepared surfaces and allow to dry (c) Supply and laying of 3mm thick minimum polymeric water proofing membrance weighting not less than 3 kG/ Sqm black finish reinforcement with non woven polyster matt with help of torching with proplane or abutance gas using to each with minimum 75mm side overlap and 100mm end overlap as per manufacturar instruction (d) alluminium paint over treated surface applied as per manufacturer instruction shall be deemed included in the quoted rates. security from total amount of roof treatment work. the rates includes refixing of earthing strip over roof after complete roof treatment.

M&L for 50mm thick cement concrete Type C-2 , 1:3:6, (Using 40mm graded aggregate) as in plinth protection , subbase complete all as specified and directed by Engr-in-charge.

S&F of aluminium anodised powder coated frame of standard section as directed or as per TD of CE(AF) shillong Zone for doors, windows, ventilators of any colour as approved with one or more rebates including joining cleat, etc for fixing etc. complete all as specified & as directed.

S&F of aluminium anodised powder coated door shutters, with top rail of size 47.62mm x 44.45mm, intermediate rail 100mm x 44.5mm, bottam rail 88mm x 44.5mm, style size 44.45mm x 47.52mm, including necessary joining cleats, glazing clips, rubber neoprene packing/ rubber gasket, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete, all as specified & directed. Note : All the aluminium shutter will be as per TD drg no:- AF/TD/242/15 sheet no 1/3,2/3,3/3 of CE(AF) shillong Zone.

S&F of aluminium anodised powder coated window and ventilator shutters, sliding type with size of sliding shutter style 39mm x 20mm, top rail size 39mm x 20mm and bottom rail size 41mm x 20mm, joining cleats, glazing clips, rubber packing/ rubber gaskets, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) , complete, all as specified & directed. Note : All the aluminium sliding window shutter will be as per TD drg no:- AF/TD/242/15 (R) sheet no 1/6,2/6,3/6,4/6,5/6,6/6 of CE(AF) shillong Zone.

S&F of 5.5 mm thick tinted coloured glass, with rubber gasket in area exc 0.5 sq.m in each pane fixed in aluminium frame work complete all as specified and as directed

S&F of 4mm thick sheet glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame or aluminium frame work in square not exc 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge.

S&F in Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, fixed in aluminium framework complete all as specified and directed.

S&F of 12mm thick Particle board for insulation purposes, fixed with screws to aluminium framework complete all as specified and directed.

S&F in repairs aluminium body hydraulically Door closer regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed as in repairs complete all as specified and directed.

S&F in repair mild steel mortice lock 4 levers, vertical type, size 100mm complete, all as specified and directed.

S&F in repairs Floor door stopper of aluminium alloy body and tongue, overall length of cover plate 150 mm, anodized, with hard drawn steel spring, fixed to shutters of any description complete all as specified and as directed.

S&F in repairs 150mm Aluminium handle (american pattern), cast type, anodized complete all as specified and as directed.

S&F of Mild Steel Butt hinges, heavy weight, cold rolled, of size 100 mm complete all as specified and directed.

S&F of Aluminium anodized, barrel tower bolt of extruded section, length of bolt 100 mm complete all as specified and as directed.

Purbanchal Construction Co (BID ID -3353973)

Baruah Fabrication (BID ID -3347533)

M/S PANKAJ SUPPLY SYNDICATE (BID ID -3353355)

M/s Vishnu Enterprises (BID ID -3347495)