Face Lifting /Up-gradation of Divisional /Sub Divisional Offices of KPDCL

Engagement of labor for dismantling of existing damaged roofing including stacking of serviceable material within 100m lead or as directed by EIC.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriages complete.

Centering and shuttering including strutting, propping etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platforms.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and fixing wood work in Truss frame & fixed in position with required accessories including necessary nails, screws, adhesive etc. of approved specifications as directed by EIC including carriage of all materials compolete job First Class popular wood.

Providing and fixing of hi rib color coated sheet roofing (Tata Durashine ,JSW Coloron Plus or equivalent) fixed with polymer coated J or L hooks bolts & nuts 8 mm dia with bitumen & GI limpet washers upto a pitch of 60 degrees excluding cost of purlins rafters and trusss 0.5 mm thick with zinc coating not less than 275g/sqm including ridges and valleys including all carriages complete

Providing and Fixing of colored panelling type GI sheets for covering ( 0.3mm) of sides/soffits including all necessary fittings,screwers, fasteners etc with carriages complete job

Providing and fixing prelaminated plywood of approved design 10mm thick fixed on ceiling work with 2"x2" ubcg frane abd 2'x2' spacing of poplar wood including 35mm by 35mm wooden cornice (K.D. Wood) with necesssary fittings including nails, Screws, Scaffolding, fastners all complete job as directed by EIC

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/calcium silicate board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with ecommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board,all as per manufacturers’ specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum moisture resistant board

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.