Proposed construction of Commercial Building on plot bearing Chalta No. 146 and 293 at Mapusa, Bardez, Goa.

DEMOLITION AND DISMANTLING

Demolishing cement concrete 1:4:8 or leaner mix including disposal of material within 50 m lead.

Demolishing R.C.C. work including stacking of steel bars & disposal of unserviceable within 50mts. lead.

Demolishing laterite stone masonry in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead.

Dismantling wood work of sectional area 40 sq.cm. and above wrought framed and fixed in frames, other frames and trusses including stacking of material within 50 mts. lead (span upto 10 mtrs.)

Dismantling doors, windows and clearestory windows (steel or wood) shutters including chowkhats architrave holdfast etc. complete and staking within 50 mt. Lead

Of area 3 sq.m. and below

Area beyond 3 sq.m.

Dismantling the tile work in floors and roofs laid in cement including stacking of materials within 50 meters lead for thickness of tiles 10mm to 25mm.

Dismantling tiled roofing (mangalore or pot or country tiles) with battens etc. complete including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead.

EARTHWORK

Earthwork in excavation by mechanical/manual means over areas (exceeding 10 Sqm. in plan & 1.5 m in width) at all depths in all type of strata comprising any of the materials such as soil, silt, sand, clay, gravels, moorum of all varieties, shingles, pebbles, all types of conglomerates, all types of laterite rock, soft rock, disintegrated rock, fissured/ shattered/ decomposed rock or weathered rock and all such other materials as described under appendix to these specifications whether in full or in parts as the case may be adopting any approved method or methods as may be convenient or permitted inclusive of chiselling, wedging etc. in all conditions such as dry, moist, saturated, submerged, foul conditions etc. including dressing of sides and ramming of bottoms, including getting out the excavated soil at all lifts, including pumping or bailing out water as directed by the Engineer on site including segregating the excavated earth along with crushed rock pieces of size 75mm and below and disposal of surplus excavated earth as directed by Engineer within a lead of 50mt and all lift and including breaking of excavated rock into boulders of size ranging from 150mm to 300mm and stacking the broken boulders at a place specified by the Engineer on site etc. complete ( N.B. : Utility service lines encountered during excavation shall be repaired if damaged at no extra cost and also it is to ensure that they are kept free of debris during execution.)

Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers (excluding rock) not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer.

MASONARY WORKS

Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.

Laterite masonry in neatly dressed stones of size as specified in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and basement.

Laterite masonry in neatly dressed stones of size as specified in cement mortar 1:4 (1 cement : 4 coarse sand) in superstructure. From floor I level upto floor V level

Laying rubble packing with available hard laterite stone from site under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.

Providing and laying Half brick masonry using Fly Ash bricks in cement mortar 1:3 (1 cement : 3 coarse, sand) with 2 nos of 8mm dia TMT bars at every third course embedded in cement mortar with bricks of class designation 40 kg/ sq. cm in superstructure.at all heights and levels, including necessary formwork, scaffolding work, curing etc., complete as directed by Engineer.

CONCRETE WORK

Providing & laying cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 river pebbles 40mm nominal size) excluding cost of centering, shuttering and finishing in: All works upto plinth level

Providing and laying upto floor five level cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 20 mm nominal size) including smooth finishing to exposed surfaces, with cement mortar 1:3 (1 cement: 3 fine sand) including centering and shuttering etc.- String courses, copings, bedplates, anchor blocks, plain window sills and the like.

Making plinth protection 50mm thick of Cement Concrete 1:3:6 (1cement : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry laterite aggregate 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

Centering and shuttering including strutting, propping etc. and removal of form for.

Foundations, footings, bases for columns and mass concrete

Vertical surfaces such as retaining walls, return walls, Partitions, walls (any thickness) including attached Pilasters, Buttresses, Plinth and string courses, Fillets and the like

Columns, Piers, Pillars, abutments, posts and struts (square, rectangle, polygon in plan)

Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth

Staircases (except spiral staircases) excluding landing

Suspended floors, roofs landings, shelves & their supports

Centering & shuttering including Strutting, Propping & removal of forms for sloping or battering surface (slabs, beams, louvers, etc.) including folded plates

Where inclination to the horizontal does not exceed 30° requiring shuttering on the underside only

Cornices & Mouldings

Providing TMT steel Fe 500/Fe500 D reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.

Providing and laying in position machine batched concrete (BMC), machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including pumping of concrete to the site of laying but excluding the cost of centering , shuttering, finishing and reinforcement including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing the strength and durability as per the direction of the Engineer-in-charge. M25 grade of reinforced cement conrete by using 410kg of cement per cu.m. of concrete. All works upto floor V level.

WOOD WORK AND IRONMONGRY

Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in positon.Second class Indian teak wood

Providing and fixing M.S. grill of required pattern in wooden frames of Windows etc. with M.S. flats square or round bars with round headed bolts and nuts or by by screws. Plain grill

Providing flat iron hold fast 40 cm including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embeded in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement: 3 coarse sand: 6 stone aggregate 20 mm nominal size.40 x 3 mm flat iron hold fast 40 cm long

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type (BWP), core of block board construction with frame of 1 st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including 12mm Teak Wood Beading all around Shutters: - 35 mm thick including ISI marked 304 grade Stainless Steel butt hinges with four ball bearing size 125 x 75 x 3 mm with necessary screws.

Providing & fixing chromium plated brass tower bolts (barrel type) with necessary screws complete. 250 x 10 mm

Provided and fixing 150 mm chromium plated brass floor door stopper with rubber cushion screws etc. to suit shutters thickness complete.

Providing & fixing Stainless Steel tubular lever D-Type mortise handles with round/Square nose, 24mm Mortise/sash lock body & Strike plate (all SS Finish), Pin cylinder 60mm with one side key and other side knob/thumb turn with necessary screws etc. complete

Providing and fixing Stainless steel 304 grade D type handles with necessary screws etc complete L 300mm/325mm x 22 to 25mm dia

Supplying & fixing at all levels approved make & model Mortice dead lock SS finish with 55mm backset, 20mm square forend and prepared 6 pin High Security Cylinders with patented inline serrated keys with Blocking pin and Cylinder conforming to EN 1303 Key Related Security Grade 6, Attack Resistance Grade 2. Protection against Illegal & Duplicate Keys with Anti Pick, Anti Bumping & Anit Impression features 80mm Length both side key operation & Escutcheons in satin stainless steell Finish. Master keyed with 3 Keys standard length 80mm in satin nickle plated finish with necessary screws etc. as directed by Engineer.

FRP (Fiber Reinforced Polymer) Frames Manufacture, Supply and Installation (with anchor fastener) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) Frame of cross section as per options below with right angle joint and FRP (Fiber Reinforced Polymer) laminate made from 450 grams per sq.mts (gsm) chop strand glass fiber (matt) and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps). The core of frame would be filled with seasoned wood as infill material. The slot of frame for door resting will be of suitable width so as to take specified thickness door. The frame will be water proof as well as mild acid/ alkali resistant manufactured in an ISO 9001- 2015 certified company. Frame size 5” x 2 ½ “

Single Colour Foam Core FRP (Fiber Reinforced Polymer) 35mm Door Shutter Manufacture, Supply and Installation (including accessories as mentioned below) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) door shutter of specified thickness as per options below by using tray system with seasoned hard wood, moisture less than 17%, wood styles for Top rail and lock rails. FRP (Fiber Reinforced Polymer) laminate made up of 450 grams per sq.mts (gsm) chop strand matt and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps) . The core of shutter will be filled as specified (Expanded Polystyrene Foam / Polyurethane Foam (EPS/PU) Foam). The shutter to be of single colour & water proof as well as mild acid / alkali resistant manufactured using RV TIFAC (R V Engineering College, Bangalore & Technology Information Forecasting & Assessment Council) technology in line with IS 13034 1990 test Standard in an ISO 9001 – 2015 certified factory.Accessories: i) S. S. Hinges 4” - 3 Nos ii) S. S. Latch - 1 No iii) Tower Bolt 5” - 2 Nos iv) Handle 5” - 2 Nos b)

STEEL AND ALUMINIUM WORK

Steel work in single sections (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only) including cutting, hoisting fixing in position and applying a priming coat of red lead paint.

In R.S. joists, channels, angles, tees

In flats of all sizes

Providing and fixing in position collapsible steel shutters with vertical channels 20 mm x 10 mm x 2 mm and braced with flat iron diagonals 20mm x 5mm size with top and bottom rails of T-iron, 40 x 40 x 6 mm with 38 mm dia. Steel pullys completely bolts locking arrangement, stopper, handles including applying a priming coat of red lead paint.

Supplying and fixing rolling shutters of approved make, made of 80 x 1.25 mm M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs grade No.2 and M.S. top cover of 1.25mm thick for folling shutterstop cover and spring.

Providing and fixing Ball bearings for rolling shutters

Providing and fixing in position hand rail in balconies, landings and the like with 2" dia G.I. pipe (light class) resting on 20 x 20mm M.S. square bars of clear height making necessary holdfast fixture (20mm square bars 15 cms long) embedded in balcony concrete for resting the M.S. vertical square bars with holding etc as required (measurements will be made along the length of the hand rail)

Providing and fixing Powder coated Aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II with aluminium sections powder coated with pure polyster powder of thickness 75-80 microns approved shade including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: windows with two sliding shutters using 18 mm series shutters section with Plain glass. All work between civil work and aluminium frames shall be sealed and made watertight by applying silicone sealant . Sections details of 18 mm series: Outer Tube @0.635Kg/m 63 mm x37mmx1.20mm,2 Track Top & Side @ 0.584Kg/m 61mmx31.75mmx1.10mm, 2 Track Bottom @ 0.637Kg/m 61mmx31.75mmx1.10mm, Handle @0.428Kg/m 40mmx18mmx1.20mm, Interlock @ 0.512Kg/m 40mmx18mmx1.20mm, Top Bottom @0.428Kg/m 40mmx18mmx1.20mm, U clip @0.15Kg/m 12.70mmx12.70mmx1.59, 4 mm thk clear float glass, gaskets complete with accessories for locking, handles, stopppers, ball bearing etc.

Providing and fixing Powder coated aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II with aluminium sections powder coated with pure polyster powder of thickness 75-80 microns approved shade including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Adjustable louvered windows. Figured glass. Sections details of 18 mm series: Outer Tube @ 0.478Kg/m 50.8 mm x25.4mmx1.20mm,Aluminiunm Channel at Top & Bottom @ 0.09Kg/m 9.5mmx9.5mmx1.2mm, 4 mm thk Figured glass, gaskets complete with accessories for locking, handles, stopppers etc.

Providing and fixing Powder coated aluminium Fixed partitions with Plain plate glass in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II with aluminium sections powder coated with pure polyster powder of thickness 75-80 microns approved shade including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Sections details of 18 mm series: Outer Tube @ 0.70Kg/m 61.90 36.50mm x 1.20mm,Middle Tube @ 0.80Kg/m 61.90 36.50mm x 1.20mm ,Glazing Clip @ 0.113kg/m 19mm x 17mm x 0.9 mm complete with accessories etc.

FLOORING AND FLOOR FINISHES

Providing and and laying vitrified floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete 600 x 600 mm light Shades

Kotah stone slab flooring over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing etc. complete. 20 mm thick

Kotah stone slab flooring over 25 mm thick in risers of steps, skirtings, dado & pillars laid on 12mm (average) thick cement mortor 1:3 (1 cement : 3 coarse sand) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete.

Providing and fixing vitrified antiskid tiles (300x300) and 10mm thick tiles in floor, treads of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete. (Tiles shall be of all inclusive price range of Rs 360/- to Rs 460/- per sq.mt).

Providing and fixing 1st quality ceramic glazed wall tiles (Johnson, Somany, Kajaria )conforming to IS:15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @3.3kg per sq.m including pointing in white cement mixed with pigment of matching shade complete. Wall Ceramic Glazed Tiles : 300 x 600 (Tiles shall be of all inclusive price range of Rs 805/- to Rs 905/- per sq.mt).

Precast plain cement chequered tiles 22 mm thick of required shades laid in floors, treads of steps and landing on 20 mm thick bed of Cement mortar 1:4 (1cement : 4 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete.Dark shades using ordinary cement

Providing and and laying vitrified unglazed porcelain tactile floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete

300 x 300 mm Design - Liner

300 x 300 mm Design - Buttons

Providing and fixing of approved make and shade rectified vitrified tiles skirting of 100 mm size at all levels over cement mortar backing coat 12mm thk 1:3 (1 cement :3 Coarse sand) or approved tile adhesive and jointed with grey cement slurry with very fine joints etc complete as directed by Engineer. (Tiles shall be of all inclusive price range of Rs 805/- to Rs 905/- per sq.mt).

ROOFING AND CEILING WORK

Providing and fixing 15cm wide 45cm overall semi-circular plain G.I. sheets gutter with iron brackets 40 x 3 mm bolts nuts and washers etc., including making necessary connection with rain water pipe complete as per design.0.63 mm thick sheet

Providing and fixing colour coated galvulium roofing sheets of 0.5mm thickness including all the accessories (TATA, JSW make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge.

Add for providing & fixing Flashings -[Corners, Ridges, valleys, gable end & Trims] (Girth upto 610mm) including all the accessories complete as per the directions of the Engineer in charge.

Waterproofing of sunken slabs, toilet blocks, terraces on slabs under brickbats, roofs, watertanks. Cleaning the surface and filling cracks (if any), applying EPCO ACR wherever necessary, Providing and Moistening the surface with water to render it saturated. Mix Cement and Monobond WF in the ratio of 1.25 kg to 1 by weight and stir continuously. Apply minimum 2 coats with an interval of 12 hours minimum between the coats. Fix fiber mesh while the first coat is still tacky. Cure with sprinkling of water 3-4 times a day. incl. cost of scaffolding transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent

Providing water proofing treatment over the new R.C.C. roofs terrace toilet by spreading cement slurry over the R.C.C. slab and laying of 10cms. Average laterite stone ballast coba with the necessary gradient for easy flow of rain water and the coba in covered with damp proof of Hindustan water proofing co. Or equivalent jointless water proofing plaster of mix 1:3 ( 1 cement : 3 find sand), finished smooth with wooden trowel with false marking of 30 cms square. The vertical surface of the adjoining walls are to be treated upto a height of 30cms including rounding of junction (the rate includes for complete items including labour and materials and including cost of initial treatment of roof slab as follows. The injunction of damp proof or equivalent compound with cement solution will be given as and when found necessary for filling honey comb, cracks etc. in the R.C.C. slabs). NOTE: cement consumption 25 kg/sq.m.

Providing and laying Brick-bat filling in sunken portion of toilets in 1:3 cement mortar [1 cement : 3 coarse sand] topped with 10cm thk. plain cement concrete 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size and top finished with a coat of 20mm thk 1: 3 cement mortar [1 cement : 3 coarse sand] mixed with approved waterproofing compound to desired slope including rounding of edges, corners ect.including cost of all materials, labour, equipments, tools, scaffolding, cleaning, curing, testing complete to the satisfaction of the Engineer.

PLASTERING AND FINISHING WORK

12mm cement plaster 1:4 (1 cement : 4 fine sand)

6mm cement plaster to ceiling 1: 3 (1 cement : 3 fine sand)

Neat cement punning

18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1:3 (1 cement : 3 coarse sand) finished with sponge upto height of 10.00 m from Ground level.

Applying one coat of distemper primer of approved brand and manufacture on wall surface.

Applying priming coat with ready mixed primer of approved brand and manufacture on wood work complete.

Applying priming coat with ready mixed red lead paint of approved brand and manufacture on steel work.

Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade.

Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for wood work of approved brand & manufacture in all shades on new work to give an even shade.

Wall painting (two or more coats) with Premiun plastic emulsion paint of approved brand and manufacture on new work to give an even shade.

Painting three or more coats with acryllic exterior paint of approved brand and manufacture including applying one coat of cement primer of approved brand and one coat of surface treatment on all types of plastered surfaces etc. complete.

Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

WATER SUPPLY SEWERAGE, PLUMBING AND SANITATION WORK

Proving and fixing white vitreous china water closet squating (European type w.c. pan) with seat and lid, C.P. brass hinges and rubber buffers 10 lts. High level P.V.C.. flushing cistern (of approved make ) with fittings, rack bolts 32 mm diameter P.V.C. telescopic flush pipe with fit tings and clamps 25mm P.V.C.. over flow pipe with specials & mosquito proof coupling of approved municipal design and nylon. chain and pull complete, cutting and making good the walls and floors where required. W.C. pan with white plastic seat and lid.

Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white, 15 mm C.P. brass pillar taps C.P. brass chain with rubberplug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap and union complete, including cutting and making good the walls where required. Flat back wash basin size 630x 450mm with a single 15 mm C.P. brass pillar taps.

Providing and fixing white vitreous china pedestal for was basin complete recessed at the back for the reception of pipes and fittings.

Providing and fixing C.P. bras or M. I. Trap for wash basin and sinks: 32 mm dia

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing ofpipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. 25 mm dia nominal outer dia pipes.

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778,having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe). 32 mm outer dia CPVC pipe

Providing and fixing normal gauge polythene pipes of approved quality complete with special flange compression type fitting (of approved make) including trenching ad refilling etc (external work) (high density): 32 mm nominal bore

Providing & fixing G.I. pipes complete with G.I. fittings including trenching & re-filling etc. (external work). 32 mm nominal bore

Making connection of G. I. Distribution branch with G. I. Main 50 mm to 80 mm nominal bore by providing and fixing tee including treading the pipe etc. complete

Fixing water meter & stop cock in G. I. Pipe line including cutting & treading the pipe and making long screw etc. complete (cost of water meter and stop cock to be paid separately)

Providing and fixing brass stop cock (heavy) of approved quality :25 mm nominal bore .

Providing and fixing ball valve (brass) of approved quality High pressure with P.V.C. floats: 25mm nominal bore

Providing and placing on terrace roof of floor three (2nd floor roof) approved make single piece rotational moulded polythene water storage tank of specified capacity having I S I mark and conforming to I S 12701; 1996.

500 lit. capacity

1000 lit. capacity

Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed:

110 mm dia

75 mm dia

Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door :

110 mm dia

Providing and fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door :

110 mm dia

Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door 75 mm dia

Providing and laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone, aggregate 40 mm nominal size) alround S.W. pipes including bed concrete 15 cm thick as per standard design :150 mm diameter.

Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1: 1 1/2:3 mix (1 cement: 1 1/2 coarse sand ;3 graded stone aggregate 20mm nominal size foundation concrete 1:1 1/2:3 mix (1 cemet ;1 1/2 coarse sand :8 graded stone agrregate 20mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design.

Inside size 90 x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455 x610mm internal dimensions total weight of cover ad frame to be not less than 38 kg. (weight of cover 23 kg. )

Providing and fixing NICKEL chrome plated copper alloy Fancy concealed stop cock with slinding flance 15 mm Jaquar make or equivalent. Confirming to IS 8931;1993- 15mm nominal bore

Providing and fixing NICKEL chrome plated copper alloy Fancy BIB Cock Short Body Jaquar make or equivalent. Confirming to IS 8931;1993-15mm nominal bore

Providing and fixing NICKEL chrome plated copper alloy Fancy Pillar Cock rocket type Jaquar make or equivalent. Confirming to IS 8931;1993-15mm nominal bore

Providing and fixing NICKEL chrome plated copper alloy Fancy BOTTLE TRAP ECONOMY TYPE 32MM Jaquar make or equivalent. Confirming to IS 8931;1993

Providing and fixing Hand Shower (Health Faucet) with 8mm dia, ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards.

Providing and fixing R.P.V.C. vent cowl:75 mm dia

MISCELLANEOUS WORKS

Providing anti – termite treatment to buildings conforming to I.S.S. 6113 part II 1971 (revised) including adopting precautions for health hazards and safety measures as required therein with the cost of all materials, chemicals, plants, equipments required for the treatment and furnishing a guarantee for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. (The payment will be made on plinth of the building. Pre-construction

Disposal of excavated earth/murrum, unserviceable dismentelled material such as moorum, lime, stones, sands, concrete, building rubbish etc. by tipper truck including loading, unloading and stacking up to a all lead.(place of disposal to be identified by contractor)

Providing and fixing signage made of base material of 4mm thick Aluminum composite panel with computer cut self adhesive vinyl graphic covered with clear vinyl to protect from peeling. The signage shall be fixed with 12mm dia SS studs or ss mirror screws.All material shall be of approved make. All works shall be completed as per the drawing, specification and direction of the Engineer.

REBATE

All sizes of Roofing tiles (mangalore or pot or country tiles)

All types & sizes of Wood sections

Please Enable Macros to View BoQ information