SPECIAL REPAIRS TO CERTAIN SMQs AND PROVN OF WATER SAVING TAPS AT CERTAIN LOCATIONS AT AFS HAKIMPET UNDER GE (AF) HAKIMPET

Amount

Demolition of unreinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engineer-In-Charge

M&L 25mm thick Plain Cement concrete type B-0, 1:2:4 (12mm graded aggregate) Laid in flooring as specified and directed by Engineer In charge.

Material and labour for ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors/ skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed/bedding layer in CM (1:6) complete all as specified and as direcetd.

Material and labour for non skid colour ceramic tiles of 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm of approved 1st quality in floors etc set and jointed in neat cement slurry and pointed with white / coloured cement to match laid over and including 15 mm thick screed bed/bedding layer in CM (1:4) coloured tiles all as specified and as directed.

Material and labour for for Digital coloured glazed ceramic tiles of sizes 300m x 450 mm X 7 mm thick jointed in neat cement slurry, laid over including 10 mm thick rendering coat/backing layer in CM (1:4) and pointed in white or coloured cement to match the shade of tile as in vertical surfaces such as dado/skirting complete all as specified and as direcetd.

Taking down plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. in cement lime or cement mortar including removal of spoil/ demolished material out of the premises of the site complete all as specified and as direcetd.

M&L for rendering to brick masonry or stone surfaces (external plastering/manholes) 15mm thick in cement mortar 1:4, mixed with WPC to be finished even and smooth (without using extra cement complete all as specified and directed

M&L for applying walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

M&L Complete removal of existing treatment on walls complete all as specified and as direcetd.

M&L for 2 coats of Oil bound distempering over a coat of primer over and including 3mm thick wall putty with white or tinted on walls complete all as specified and as direcetd.

M&L 3 coats of white wash on newly plastered surfaces of walls complete all as specified and as direcetd.

Complete removal of existing treatment from ceilings including scrapping and removing the entire scales of existing treatment complete all as directed.

M&L 3 coats of white wash on surfaces of ceiling complete all as specified and as direcetd.

Taking down Chowkhats or frames with shutters exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and as direcetd.

Taking down Chowkhats or frames with shutters n exc 1.5 sq. m each complete all as specified and as direcetd.

Supply and fix solid PVC door frame of size 50 mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification complete all as specified and as directed by the Engineer-in-Charge

Supply and fix Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawingcomplete all as specified and as directed by the Engineer-in-Charge

S&F 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 butt hinges for PVC door frame complete all as specified and as directed by the Engineer-in-Charge

Supply and fix 150 mm size Alluminium, anodised barrel tower bolts of extruted section and fixed complete all as specified and as directed by the Engineer-in-Charge

Supply and fix 125 mm size extruded aluminium door handles fabricated type complete all as specified and as directed by the Engineer-in-Charge

Supply and fix Pressed steel frames125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified

Supply and fix Flush shutterssingle leaf/ double leaf,30mm thck solid core construction, with block board core and both sides face is covered with decorative face veneer with lipping/frame to match complete all as specified and as direcetd.

Supply and fix 30mm thick factory made skeleton shutters, open rebated and preparedto receive gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkat complete all as specified and as direcetd.

S&F 120 mm long Butt hinges, heavy weight, cold rolled mild steel, and fixed, for flush pressed steel door frame complete all as specified and as directed by the Engineer-in-Charge

Supply and fix 200 mm size Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed by the Engineer-in-Charge

Supply and fix 150 mm size extruded aluminium door handles fabricated type complete all as specified and as directed by the Engineer-in-Charge

200mm long Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as direcetd.

Supply and fix mild steel helical door spring rat tail rod model including roller plate complete 300 mm long complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix Anodised aluminium window shutters, sliding type three track, two for fixing glass sections and one shutter with wire mesh aluminium section weighing 0.55 kg/Rm including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as handles and locking arrangement complete all as specified and as directed. Note : Glass and Wire cloth will be measured and paid separately under relevant item.complete all as specified and as direcetd.

M&L Powder coatedAnodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

M&L Powdercoated aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified

Supply and fix 4mm thick plain sheet glass glazing any size with rubber packing where ever required complete all as specified.

Supply and fix Anodised aluminium grill any size 8 mm thick complete with frame or channel section including all necessary fittings complete all as specified.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average with of aperture 1.4 0 mm and fixed with stainless steel wire staples complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair vitreous China wash hand basin whiteflat back, size 550x400mm including all fittings complete all as specified and as direcetd.

S&F in repair vitreous China wash down water closet pan (pedestal pattern) white,incl. trap, connection to drain and flushing pipe including seat cover for pedstal pan complete.

S&F in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed.

S&F in repair angle valves 15 mm bore fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specified and directed.

Supply and fix 15 mm bore LDPE pipe 45cm long with brass nuts and washers on both ends all as in repairs specified and directed.

S&F in repair 15 mm bore fancy concealed type,Stop valves,chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as direcetd.

S&F in repair Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as direcetd.

S&F in repair 15 mm bore fancy type long body Bib tap crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as direcetd.

S&F in repair 15 mm bore piller taps cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure complete all as specified and as direcetd.

S&F in repairTubular towel rail, 20mmdia, D type, 60cm long between flanges all as specified and directed.

Supply and fix 30 mm dia bore waste fittings brass chromium plated fixed to wash hand basin/urinals with long screwed shanks and fly nuts flange and bedded in run lead cement and other end fixed complete

S&F in repair Two way taps 15 mm bore fancy type, chromium plated, screwed down, high pressure with crutch screwed both ends for iron pipe or for unions all as specified and directed.

M&L in repair 15 mm bore fancy type health faucet with SS hose complete all as specified.

Supply and fix Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40gms) and fixed in repairs all as specified and as directed.

Supply and fix Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) and fixed in repairs all as specified and as directed.

Taking down steel tubing and connections 15 mm bore, including cleaning for refixing or removal to store all as specified and directed.

All same as per item No. 50 here in before but 20 mm bore.

All same as per item No. 50 here in before but 25 mm bore.

Supplying and laying 16mm bore of CPVC pipes with SDR 13.5 pipes & plain CPVC SDR 11 fittings fixed complete to walls, ceilings or in floors etc. in repairs including concealed piping after cutting in brick work/ stone masonry walls where ever required complete all as specified and directed.

All as per item above but 20mm bore.

All as per item above but 25mm bore.

Dismantling of stone slabs of any description or thickness in floors and aprons etc, laid, bedded and pointed in any mortar all as specified and as directed.

Material and labour for 20 mm thick Granite (of any type) tiles machine cut, bedded over cement screed bed 15 mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rounding edges,grinding and polishing complete all as specified and as directed.

S & F 1000 Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical shape with vertical top closed) hoisted and fixed in position including dismantling complete all as specified and directed.

S&F 20 mm bore dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high dencity plasstic ball screwed for iron pipe and fixed .(minimum weight 15 mm-142gms/20mm-210gms) all as specified and directed.

S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore pipe all as specified and directed.

S&F PVC (SWR)110mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as direcetd.

S&F PVC (SWR)110mm pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as direcetd.

S&F PVC (SWR) bends of 110mm bore complete all as specified and as direcetd.

S&F PVC (SWR) branch piece of 110mm bore, single (single Y) equal or unequal complete all as specified and as direcetd.

S&F PVC (SWR) vent cowl of 110mm bore complete all as specified and as direcetd.

S&F PVC (SWR) floor trap of 75mm, plain with grating including jointing with solvent cement complete all as specified and as direcetd.

S&F new stainless steel plate rack of more than size 970x770x230mm of standard quality, fixed to wall with wooden gutties and screws including taking down old plate rack complete all as specified and as directed.

S&F sinks with drainage board made of 304 grade stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mmbowl size 410mm x 330mm x160mm including taking down old sinkscomplete all as specified and as direcetd.

M&L Plain Cement concrete 75 mm thick type C-2, 1:3:6(40mm graded aggregate) Laid in plinth protection including Grade B joint filling as specified and directed by Engineer In charge.

Supply and fix in repairs 25 mm dia mild steel, chromium plated curtain rods with fixing brackets, stops, rollers etc.and taking down old pipe complete all as specified and as directed by the Engineer-in-Charge.

M&L Machine cut kota stone slab in stairs/ flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing and including 15 mm thick screed bed/bedding layer in CM (1:6) complete all as specified and as direcetd.

M&L for two coats of synthetic enamil paint over a coat of red oxide zinc chrome on new surfaces of any description complete all as specified.

Material and labour for Demolition of Brickwork or stone/ boulder masonry, built in cement mortar, manholes including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed by Engineer in charge.

Brickwork with fly ash bricks, straight or curved on plain exc 6m mean radius, built in cemrent mortar 1:4 complete all as specified and as direcetd.

Material and labour for providing reinforced precast cement concrete type B1 1:2:4 set in cement mortar 1:4 as in cover slabs as in drain covers and etc complete all as specified and as directed.

Material and labour for TMT bars 10 mm dia and over ,cut to length bent to shape required including cranking, bending, spirally hooping for columns and binding with MS wire (annealed) not less than 0.90mm dia wire etc complete all as specified and as directed.

Taking down chowkhats with cupboard shutter exceeding 1.50 Sqm but not exceeding 4 Sqm each including shelves cub boards (One cupboard set) of any type complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for Second class hard wood plain solid straight chowkats and frames wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix 18/19 mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed by the Engineer-in-Charge.

S&F teak wood lipping, 6 mm thick 18/19 mm width fixed with nails complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix brass magnet for cupboard complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix continuous (piano) hinges, mild steel, bright finish or electro galvanised width of flap 40 mm complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, brass polished complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for providing PCC 1:4:8, type D-2 (40 mm graded stone aggregate) for sub base of floor 100 mm thick complete all as specified and as directed

Material and labour for Colour Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick with grey cement and no pigment set jointed and pointed in neat cement slurry colour to match in floors complete all as specified and as directed.

S&F in repair self closers pillar tap brass chromium plated fancy type complete all as specified and as directed by Engr-in-charge. Make : Prayag (Cat No. BSC-02), Parryware, Hindware or equivalent)

S&F in repair Bib cock sink tap regualr spout (W/M) with flange, brass chromium plated fancy type complete all as specified and as directed by Engr-in-charge. Make : Prayag (Cat No. 6416), Parryware, Hindware or equivalent)

Taking down carefully existing unserviceable aluminum/copper point wiring (light, fan, socket or power) of any description & in any position complete including all fittings & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc including taking out and removing serviceable fittings/fixtures and making good the disturbed surface of walls, floors, ceiling etc. to match with the existing surfaces complete all as specified and directed

M&L for point wiring with using 1.5 Sqmm (nominal area) multi standard copper conductor, single core, FRLS PVC insulated & unsheathed cable, 1100 volts grade with and including PVC casing and capping of adequate size fixed on surface with PVC rawl plugs with sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FRLS PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed for following:-

One light/buzzer point controlled by one; one way switch.

One fan/exhaust fan point controlled by one, one way switch

One 3 pin socket out let 5 amp point on the (same board) with other switches.

One 3 pin socket outlet 5 amp point on the independent board

NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size modular white colour cover plate with frame

All as per item here-in-before but with 4 sq mm size FRLS pvc insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board.

S&F ceiling rose surface bakelite 63.5 x 20 mm, three terminals, complete all as specified and directed.

Supply and fix modular switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge.

Supply and fix modular switch 16 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge.

Supply and fix modular bell switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge

Supply and fix modular socket, 6 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge

Supply and fix modular socket, 6 /16 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge

Supply and fix modular fan regulator 120 W 2 module complete all as specified and directed by Accepting officer

S & F buzzer, ding dong AC 230 Volt single pole complete as specified.

S & F in repairs earth plug and socket, single pole, neutral sheet metal enclosures with a two pin, plug and socket 20Amp, 240 volts with and including one MCB, SP, 20A, 240 Volts as per all as specified and directed.

S & F in replacement elegantly industrial general purpose box type luminaire, 1x20 Watt, designed box type LED luminaries, CRCA sheet steel housing with white reflector cover fitted to the body with decorative end covers complete with driver, spring loaded rotor type lamp holders, connected block with and including 01 No LED lamp 20 Watt and all accessories, pre-wired and connecting the same to ceiling rose with & including twin core PVC insulated and sheathed copper conductor 23/0.0076 cable including all accessories and fixing arrangement for fixing the light fitting to walls / roof surface over and including 2 Nos PVC square box complete all as specified and directed.

S & F in replacement 10 W mirror light having indirect up down light for mirror and as well light application with CCT 6000K, including LED Bulb/Module and Electrical connection with 3 core flexible wire of appropriate size from ceiling rose to the tubelight fitting, all as specified and directed.

S&F lamp holder PVC / Polycarbonate type with cord grip cap suitable for LED/CFL lamp fitting complete all as specified and directed by Engr-in-charge

Taking down distribution boards / main switches of any type, size and capacity complete all as specified and directed by Engr-in-charge

Taking down MCBs, metal clad plug of any type, size and capacity complete all as specified and directed by Engr-in-charge

S & F sheet metal enclosure powder painted for MCB DB SPN 08 way double door with IP-42 protection with Din rail and busbar complete all as specified and directed by accepting officer

S & F sheet metal enclosure powder painted for vertical type MCB DB TPN 06 way double door with IP-42 protection with Din rail and busbar complete all as specified and directed by accepting officer

Supply and fixing MCB TPN, 100 Amps in `C’ series having current rating 10 KA complete all as specified and directed.

Supply and fixing MCB SPN, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed.

S&F MCB single pole, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed.

M/L for Sub main wiring with 2 runs of PVC insulated unsheathed multi stranded single core copper conducter 6 Sqmm drawn through PVC conduit/casing capping including accessories with 6 sqmm PVC insulated earth wire fixed to the existing wall with saddles, screws etc including taking down old unservicaeable submain wiring complete all as specified and directed. Note: 2 runs of cable and one run earth wire and conduit/Casing & Caping will be measured as one length.

M&L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed. NOTE: Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’

Supply and fix Exhaust fan, steel body, steel body AC Single phase 230 V of size 300 mm sweep with blades, and frame and louvers complete all as specified and directed by Engr-in-charge

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed by Engr-in-charge

Supply and fix electric water heater, storage type ABS body with SS inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc

Supply and fix stop valve CP of dia 20 mm with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed by Engr-in-charge

Supply and fix CP bib tap of dia 20 mm cast iron alloy with crutch or butterfly handle screwd for iron pipe to outlet pipe of geyser complete all as specified and directed by Engr-in-charge.

Supply and fix of any length CPVC pipe of dia 20 mm dia manufactured as per IS : 15778 including connection sockets, elbow and brass tee for connecting pipes etc and connecting pipe to inlet and outlet of the geyser complete all as specified and directed by Engr-in-charge

M&L for cutting round holes suitable for fixing exhaust fan of size 300 mm into or through any type of walls built in cement mortar or cement lime mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required and plastering in CM 1:4 to external/ internal surfaces and finished to match with the existing surfaces complte all as specified and directed by Engineer-in-Charge. Note: Contractor requested to visit the site before quoting for type of walls to be cut for making holes

M&L for cutting round holes suitable for fixing exhaust fan of size 250 mm into or through any type of walls built in cement mortar or cement lime mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required and plastering in CM 1:4 to external/ internal surfaces and finished to match with the existing surfaces complte all as specified and directed by Engineer-in-Charge. Note: Contractor requested to visit the site before quoting for type of walls to be cut for making holes

Material and labour for platering of 10 mm thick on the fair faces of brick surfaces or concrete surfaces with cement plaster 1:6 complete all as specified and directed by Engr-in-charge.

Materail and labour for two coats of white wash on wall complete all as specified and directed by Engr-in-charge.

Supply and fix in replacement XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of cross sectional area 35 sqmm 3.5 core complete all as specified and directed

Supply and lay pipe galvanized, "Medium class", including fittings 25 mm (1.0") dia complete all as specified and directed

Supply and fix PPR Gate valves (brass insert) of 25 mm bore complete

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundations / taking out / in cables / pipes etc. or for shafts, well cess pits, manholes, pier holes, etc. but not exceeding 10 Sqm on plan and getting out in any t

Returning, filling in, including spreading, levelling, watering and well ramming in layer not exceeding 25 cm thick in soil complete all as specified and directed.

Removing surplus soil obtained from excavation to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting paint complete all as specified and directed.

Supply and fill dry river sand in trenches for cable cushioning over and below the cable complete all as specified and directed. ( The punned thickness shall only bev measured)

Supply and fix precast concrete cable covers class LV type 1, flat size 250 x 150 x 40 mm M-20 grade concrete laid dry for cable protection complete all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with suitable no of nuts, bolts and clamps complete all as specified and directed by Engr-in-charge

VACON INFRASTRUCTURES

SAI RUPA CONSTRUCTIONS

K LAKSHMAN SINGH AND CO