Supply, Testing, Installation and Commissioning of Fully Automatic Cleaning and Grading Unit 4 TPH

Vertical Bucket Elevator for Seed Grader / Fine Cleaner (GI Sheet Metal): Capacity: Min. 7.5 TPH Discharge height: Min. 5 meter Discharge pipe: Suitable diameter of 2mm ms thickness Nylon belt: 3 ply and speed should not exceed 1 m/s Nylon bucket sizes: Approx. 6" X 6" Numbers of box: Double Sizes of each box: Approx. 210 X 180 mm Outside boot flange: Approx. 250 X 600 mm Head & casing: Min. 1.6 mm Boot Section: Min. 3.0 mm Spout section and spouting: Suitable to fitting Platform and Safety cage: Safety cage of Min. 2 feet in height Electric Geared Motor (Crompton Make or any equivalent): 1.5 HP, three ph, AC supply

Pre Cleaner / Fine Cleaner / Seed Grader (With Top Mounted Blower): Capacity: Min. 4.0 TPH No. of screen: Min. 3 Nos. ( flat & oscillating type) Size of top screen: Approx. 1000 X 1400 MM (W X L) Size of Middle screen: Approx. 1000 X 2100 MM (W X L) Size of Bottom screen: Approx. 1000 X 2100 MM (W X L) Screen inclination: Fixed type Cradle Oscillation speed: With variable speed pulley (VSP) Cradle material (MS STEEL ): MS (Min. 2.0 mm thick) Screen perforation cleaning device: With rubber balls Structure material: ISI mark Rectangular pipe (Approx. 5“X 2.5“) Numbers of blower / air flow assembly: Min. 1 nos. (Top mounted blower machine ) Air flow assembly / Blower fan balance: Dynamically balance No. of scalping: 1 Nos. No. of air aspiration: 2 Nos. No. of grading: 2 Nos. Electric motor for blower: 5.0 HP, 440 volt, 3ph, 50Hz, AC supply Electric motor for blower: 2.0 HP, 440 volt, 3ph, 50Hz, AC supply Over all Spaces/ Overall Dimensions: Approx. 2700 X 1550 X 3100 mm (L X W X H)

Intended Cylinder: Capacity: Min. 4.0 TPH Size of Cylinder : Approx. 635 X 2500 mm (D X L) Structure material: ISI mark Rectangular pipe (Approx. 3“X 1.5“) No. of grading: 2 Nos. (CUTGRAIN + GOODS) Electric motor for blower: 1.5 HP, 440 volt, 3ph, 50Hz, AC supply Dimensions: Approx. 2800 X 750 X 1200 MM (L X W X H)

Vertical Bucket Elevator For Vibro Destoner In (GI Sheet Metal): Capacity: Min. 7.5 TPH Discharge height: Min. 5 meter Discharge pipe: Suitable diameter of Min. 2mm ms thickness Nylon belt: 3 ply and speed Is not exceed 1 m/s Nylon bucket sizes: Approx. 6" X 6" Numbers of box: Double Sizes of each box: Approx. 210 X 180 mm Outside boot flange: Approx. 250 X 600 mm Head & casing: Min. 1.6 mm Boot Section: Min. 3.0 mm Spout section and spouting: Suitable to fitting Platform and Safety cage and ladder: Safety cage of 2 feet in height with ladder Electric Geared Motor: 1.5 HP, three phase, AC supply Material dump hopper: Approx. 4' X 2' feet

Vibro Destoner With Blower Fan ( For Stone Removal): Capacity: Min. 4.0 TPH Numbers of blower: 1 No. Blower fan Dynamically balance Type of Deck: Rectangular, Number of Deck: 2 nos., Size of Deck: Approx. 1200 X 1200 mm, Deck speed: Fixed, Deck Inclination: Length wise along discharge mode Electric Motor for Blower: 5.0 HP, three ph, AC supply, Vibro Motor (Deck) @ 2 no (1.0 + 1.0) HP, three ph, AC supply Dimension (L X W X H): Approx. 1700 X 1500 X 4000 mm Blower Fan: 7.5 HP With Motor

Magnetic Separator - 1200 mm Magnetic Area: Capacity: Min. 4 TPH Type of magnet: High intensity rare earth magnet (ND- FE-B) Magnet size complete: 10 mm magnet +2 mm washer Number of magnet used: 75 Nos. (+/- 1 no) Magnet Grade: 52 + Grade Magnetic area: mm Magnetic gauss power: Approx. 14000 Gauss power ( Tested by gauss meter) Roller stage: Single stage Total magnetic roller length: Min. 1200 mm Total magnetic roller diameter: Min. 75 mm Magnetic roller length: Min. 1200 mm Magnetic roller diameter: Min. 75 mm Belt material: P.U. Coating heavy duty elastic Belt (Length X Width X Thickness): Approx. 1200 X 700 X 0.7 mm Magnetic roll & guide roll material: Stainless steel (304 grade) Feeding & discharge Spout: Mild steel / Stainless steel (304 grade) Material of constructions (Frame + Body): MS square pipe (Approx. 50 X 50 X 4 mm) Feed hopper: 1 Nos. at material input with manual control Electric drive gearbox: Min. 1.0 HP with suitable gearbox ratio (1/30) Electric motor: Min. 1.0 HP, 1440 RPM, Three ph, 440V, AC supply Vibrating tray motor: Min. 0.5 HP, 1440 RPM, Three ph, 440V, AC supply Dimensions (L X W X H): Approx. 1300 X 1200 X 1300 mm

Foundation Frame For Magnetic Separator: For fixing Magnet machine made of heavy Pipe Material

Vertical Bucket Elevator For Specific Gravity Separator (GI Sheet Metal): Capacity: Min. 7.5 TPH Discharge height: Min. 5 meter Discharge pipe: Suitable diameter of Min. 2mm ms thickness Nylon belt: 3 ply and speed Is not exceed 1 m/s Nylon bucket sizes: Approx. 6" X 6" Numbers of box: Double Sizes of each box: Approx. 210 X 180 mm Outside boot flange: Approx. 250 X 600 mm Head & casing: 1.6 mm Boot Section: 3.0 mm Spout section and spouting: Suitable to fitting Platform and Safety cage Safety cage of 2 feet in height, Electric Geared Motor: Min. 1.0 HP, three ph, AC supply

Specific Gravity Separator Fan: Capacity of unit: Min. 4.0 TPH Numbers of air flow assembly: 5 Nos. Air flow assembly / Blower fan: Dynamically balance Size of Deck: Approx. 3100 X 1150 mm Type of Deck: Rectangular Deck Oscillation speed: With variable frequency device (VFD) Deck opening mechanism: Hydraulic gas Spring Air control device: Round Handle Spout And spouting: Suitable fitting / common of 1st & 2nd grade Material dump hopper: Min. 200 KG Hopper Suitable fitting with 4 leg / included in machine Deck Inclination: Along length variable Discharge Spout: Common Wooden deck (Steam beach wood): As per Demand Electric Motor (Fan): Min. 10 HP,3 phase, AC supply Electric Motor (Cradle): Min. 2.0 HP, 3 phase, AC supply Bearings: 40 mm internal dia. Dimensions (L x W x H): Approx. 4400 x 1700 x 2900 mm Following Accessories must be supplied: • Feed Hopper For Gravity Separator • Taper Lock Pulley For Gravity Separator • Aluminum Deflector For Grain Collection For Gravity Separator • Nylon Flap At Large Spout In Gravity Separator • Hydraulic System In Deck For Free Hand Operation In Deck • EN-8 Material MS Shaft In Machine • Air Control Meter For Air Gate Opening • Wooden Deck With Handle (SS Wire mesh, T- Bolt & CNC Clamping) I.