Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹26.0 L
EMD Value
₹44,050
Closing Date
9 Jul 2024, 11:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Directorate of Municipal Administration
JUNIOR ENGINEER
Annual repairs and maintenance work of Submersible pump motors, starters, panel boxes and hand pumps in tube wells in T Narasipura TMC Limit
DMA/2024-25/WS/WORK_INDENT19196
DMA/2024-25/WS/WORK_INDENT19196
Open
Water supply/sewage lines
Electronic Documents, First(One Cover)
DMA Town Municipal Council T Narasipura
6 documents required · 5 mandatory · 1 optional
₹650
₹44,050
25 Jun 2024
25 Jun 2024
9 Jul 2024
Annual repairs and maintenance work of Submersible pump motors, starters, panel boxes and hand pumps in tube wells in T Narasipura TMC Limit
Rewinding of submersible pumpset with copper winding wires of appropriate guage, as per specifications and / or directions of the departmental officials, including all materials, labour, equipment and...
Rewinding of submersible pumpset with copper winding wires of appropriate guage, as per specifications and / or directions of the departmental officials, including all materials, labour, equipment and...
Rewinding of submersible pumpset with copper winding wires of appropriate guage, as per specifications and / or directions of the departmental officials, including all materials, labour, equipment and...
Rewinding of submersible pumpset with copper winding wires of appropriate guage, as per specifications and / or directions of the departmental officials, including all materials, labour, equipment and...
Replace the components of submersible pump sets, requiring replacements decided by the departmental officials, with respective make of damaged ones, including all materials, labour, equipments and tes...
The Intermediate piece (IP) with IP leaded bronze brush.
The Oil Seal.and steel bush
The Impeller (Shell moulded with aluminium and bronze.)
The discharge outlet (DO) bearing DO steel brush DO bearing
The steel bearing bush (DO steel bush)
The allen screw
The pump shaft made out of stainless steel counterless ground with key way (upto 8 stages). Extra for Each stage @ Rs.40/-
The pump key (stainless steel)
The pump coupling (stainless steel)
The Non Return Valve (NRV) assembly complete with rubber O ring
The cable guard
The brass filter
The Labour Charges for overhauling of the pump set
Replace the components of motor parts of submersible pump sets, items requiring replacements decided by the departmental officials, with respective make of damaged ones, including all materials, labou...
The STATOR of motor 4 to 5 H.P
The ROTOR motor upto 3 H.P
The ROTOR motor 4 to 5 H.P
The upper flange
The lower flange
upper/ lower housing
The Carbon Housing
The Carbon Housing (Thrust bearing block assembly complete with segment bearing pad.
The Carbon Housing (Top carbond / ferrodo padding)
The Stud and Nuts
The Gun Metal bearing, centrifugally cast Aluminium Bronze bearing bush
The Motor base with pin
The Transportation of pumping machineries
The Re-errection charges of pumping machineries including overhauling and painting
The lifting of submersible pumpset from well.
The Labour charges only for overhauling
Lifting of struck up submersible pump set. Upto 300 ft PWD 2023-24 CSR WS&UGD Page No.142 Item No.12.26 Volume no 5)
Lifting of struck up submersible pump set. Above 300 ft PWD 2023-24 CSR WS&UGD Page No.142 Item No.12.27 Volume no 5)
Labour charges for Lifting of non functioning submersible pump set along with cable and GI pipes (Each length = 6m) for 50 mm PWD 2023-24 CSR WS&UGD Page No.142 Item No.12.24 Volume no 5)
Rewinding of monoblock motor with copper insulaton wire suitable gauge as per ISI specification with all necessary materials and labour,tools and equipments with guarantee period of not less than 12 m...
Cutting and threading G.I. pipes for pump fitting, public fountains with appurtenances., where the length of pipe laid is less than 6 meters PWD 2023-24 CSR WS&UGD Page No.15 Item No.2.2.2 Volume no 5...
Supplying and fixing single phase preventer using necessary wiresover an existing panel board suitable for motor upto 20 HP capacities. PWD 2023-24 CSR ELE Page No.5 Item No.5.3 Volume no 6)
Wiring for lighting/power circuit using one of FRLS PVC insulated1100V grade, multistrand copper wire with low conductor resistancesingle core in open or concealed system of wiring with specified IS69...
Repair Top Head Assembly of Hand Pumps by removing the top head assembly, replacing the wornout parts such as handle, axle, chain bearings. Reassembling after greasing in position and giving satisfact...
Dismantling India Mark III hand pump from position, releasing plunger rods, valves, piston. Overhauling the components,replace the wornout parts and re-erecting in position etc. with cutting, threadin...
Dismantling India Mark III hand pump from position, releasing GI pipes, rods, pump, cylinder and strainer. Overhauling the components, replace the wornout parts and re-erecting in position etc. with ...
Providing and greasing the chain of hand pump (both India Mark-II and India Mark-III) by removing the top head cover, cleaning wanter tank and head assembly, removing all dirt inside and outside the h...
Labour charges for repairing of existing hand pump (both India Mark II and India Makr III) above the ground level including replacing of worn out parts such as top head, inspection cover, handle, hand...
Labour charges for repairing of existing hand pump (both India Mark II and India Makr III) below the ground level after dismantling the hand pump head assembly, water tank riser assembly, plunger rods...
Scraping of old paints, stains etc. and provide painting with anti-corrosive pint over a cost primer etc. with approved brand of paint and primer etc. including the cost of all materials, labour, tran...
Dismantling of hand pump from position, releasing of GI pipes, plunger rods, pump cylinder and strainer and returning the released items to departmental stores. PWD 2023-24 CSR WS&UGD Page No.142 Item...
Labour charges for lowering additional GI pipes of dia 32 / 50 mm dia including transportation charges (New GI pipe required will be supplied by the department free of cost & released GI pipes should ...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW2-26.00 LAKHS.docx
Tender Document • 0.13 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .