Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹12 L
EMD Value
₹12,000
Closing Date
3 Nov 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE OFFICER, ETTAYAPURAM TOWN PANCHAYAT
Office of the Town Panchayat , Ettayapuram, Thoothukudi District
Construction of New Anganvadi Building at Keelavasal in Ettayapuram Town Panchayat.
2023_DTP_381534_1
Roc.No.191/2023/A1
Open Tender
Civil Works
Works
180 days
Ettayapuram Town Panchayat
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹12,000
30 Nov 2023
21 Oct 2023
3 Nov 2023
21 Oct 2023
3 Nov 2023
21 Oct 2023
Amount
Earthwork excavation for foundation in all soils and sub soils in hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders and to full depth as may be directed,except in hard rock,requiring blasting including shoring and shuttering and bailing out of water wherever necessary,refilling the sides of foundation with excavated earth or sand in layer of not more than 15cm thick.well rammed and consolidated and depositing on bank with initial lead and lift of 10m & initial lift of 2m and depositing the surplusr earth within the compound in places shown by the departmental officers with iniital lead and lifts,clearing and levelling the site etc., complete as per SS20B and as directed by departmental Engineers(TNBP No.17,23,24).
Plain Cement Concrete 1:4:8 mix (One Part of Cement, Four part of Fine Aggregate and Eight part of Coarse Aggregate) Using 40mm ISS HBG metal for foundation and basement including dewatering if found necessary and laid in layer of not more than 15cm thick and consolidated including all cost conveyance of materials and labour charges etc. complete as per standard specifications and as directed by departmental Engineers(TNBP No.28).
Supplying and Filing in foundation and basement with Filling Well Gravel in layers of not more than 15cm thick well rammed,watered consolidated including cost and conveyance of materials and labour charges etc., complete as per Standard Specification and as directed by departmental Engineers(TNBP No.24&25).
Random Rubble Masonry using CM 1:5 (One part of cement & five parts of sand) mix using rough stones and bond stones for foundation and basement and including pointing above G.L including cost and conveyance of materials to work site and including all labour charges for mixing, laying, curing the concrete etc., complete as per standard specifications and as directed by departmental Engineers.TNBP No:35H
Brick Work in CM 1:5 (One Cement & Five Fine Aggregate) mix using country bricks of size 8-3/4" x 4-1/4" x 2-3/4" size including cost and conveyance of materials to work site and including all labour charges for mixing, laying, curing the concrete etc., complete as per standard specifications and as directed by departmental Engineers – TNBP No:31
Supplying, fabricating and placing in position mild steel or TMT rods for all reinforced cement concrete works as per design given including cost of steel and binding wire with all conveyance and lead charges in all floors etc.complete complying with standard specifications and as directed by the deparmental engineers. TNBP No:30
Supplying and erecting centering for sides and soffits including supports and strutting up to a height of 3.05 metre high for plain surfaces such as RCC slabs, beams TEE or ELL beams, lintels staircase beams etc., in all floors with all cross bracings using mild steel B.G. 10 sheets of size 90 cm X 60 cm stiff ended with welded mild steel angles laid over silver oak(Country wood) joists of size 10 X 6.5 cm spaced at about 90 cm centre to centre and supported by casurina props of 10 cm to 13 cm dia spaced at 75 cm centre to centre complete complying eith standard specification in all floors. SS 30.
Reinforced cement concrete 1:1.5:3(One cement, One and Half Sand & Three coarse aggregate) using hard machine crushed granite broken stone jelly 20 mm size excluding cost of reinforcement grills, in position but moulding, finishing curing and fixing in position as directed by the departmental officers complete complying with standard specification. SS 30 and Special.
Supplying and fixing of Mild steel door including cost and conveyance charges to site fixing in its position and all labour charges etc complete.
Plastering with cement mortar 1:5(One Cement and Five Sand) 12 mm thick complying with water proof compounded with standard specification.
Finishing the exposed surface of RCC item of work such as slabs, beams, sun-shades, acia, eanopyslab, stair-case, waist slab, handing slab etc., with cement mortar 1:3 (one cement and three sand) 10MM thick including raking the surface. The rate is to include the cost of providing cement mortar or nosing for sun-shades and stair ease steps, landing slabs and etc., complete complying with standard specifications.
Weathering Course concrete using best quality broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) near the RCC roof slab in the properties of brick jelly to lime being 12:12-1/2 by volume and laid over in single layer and consolidated to the required designs and finished thickness, beating the concrete with wooden beaters of approved pattern, keeping the surface constantly watted by sprinking lime jaggary water.
Finishing the top of roof with one course of machine pressed tiles of size 20cm x 20cm x 2 cm approved quality laid in cement mortar 1:3 (One cement and three sand) 12mm thick mixed with water proofing compound confirming to ISS by 2% weight of Cement used and the joint pointed neatly to full depth of tiles with the same water proofing compound mixed with cement mortar, red oxide etc., complete complying with standard specifications.
Painting two coats with cement paint of first class quality paint and of approved color over a priming coat, including through scrapping, clean removal of dirt, etc., complete.
Painting new iron work with two coats of best first quality synthetic enamel paint of approved colour over the existing red oxide primer coat as directed by departmental officers complete complying with standard specification.
Daddoing with first quality colour glazed tiles of 150 mm x 150 mm x 6mm size of approved make and quality and colour set in Cement Mortar 1:2 (One Cement and Two Sand) and pointing with white cement neatly including cost and conveyance of all materials etc.and all lobour charges etc.complete as per Standard specification and as directed by the departmental officers.TNBP No:special
Supply and fixing Indian Type water closet including cost and conveyance charges to site etc complete. ISI make with standard specification.
Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point (5 points per coil)
Wiring with 2 x 4 sq.mm. (56 / 0.3) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box for 15A 3 pin non inter locking wall socket with 15A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC power plug point
Supply and run of 2 of 6 sq.mm (84 / 0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade on 7/20 GI bearer wire for service connection mains . SD 66 . ISI make with standard specification.
Supply and run of 2 of 6 sq.mm (84 / 0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in 25mm dia GI pipe (Class ‘B’) bent at both ends with necessary angle iron up right and end supports. SD 71 . ISI make with standard specification.
Supply and fixing of 16 Amps DPIC switch of 500 V with metal clad with fuse and netural TW Board with earth connection only. SD 142. ISI make with standard specification.
Supply and fixing of 18W LED Tupe Light Fitting with all accessories etc., complete
Supply and fixing of 16 A aerial fuse unit (500A) on suitable 100 x 100 mm TW concealed box with hylem sheet on the tapping pole with necessary clamps. SD 128 . ISI make with standard specification.
Supply and fixing of 25W LED Street Light Fitting with all accessories etc., complete
T SHANTHI
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_454697.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .