SPL REPAIR E/M TO BLDG NO P-62 AND P-62A AT BDE CAMP IN THE AOR OF STN HQ POONCH UNDER GE 881 EWS

Amount

Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed.

Taking down existing wooden casing capping from the site carefully and refixing the same at existing place incl all required accessories to fix the same and making good disturbed surface to match with existing finishes, complete all as specifiecd and directed.

M&L for point wiring with two single core 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable and one single core 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable drawn through wooden beading in wooden casing and capping, complete with suitable wooden boards, terminal boxes and all required accessoriess and all required accessories such as wooden terminal box etc complete all as specified and as directed for the following :- Note : (i) Wire shall be drawn through existing wooden beading (ii) Colour of casing to match with existing wooden colour or as directed by Engr-in-Charge (iii) Making good disturbed surfaces to match with the existing finishes. (iv) All materials used shall conform to relevant IS standards. (v) Execution of the work shall strictly adhere to the directions of the Engineer-in-Charge. (vi) Contractor to ensure minimum damage to existing surfaces and restore them to original condition post-installation.

One light/fan/bell point controlled by one way switch 6 Amp complete all as specified and directed.

One 3/5 pin socket outlet 6 amp on same board complete all as specified and directed.

One 3/5 pin socket outlet 6 amp independent board complete all as specified and directed.

All as per srl item No 3 here in before but for one 16 amps socket outlet independent with two single core 4 Sqmm size cable as phase & neutral and one single core 4 Sqmm as in continuous earth wire complete all as specified and directed.

S&F switch piano flush type 6 Amp single pole one way, (ISI marked), complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin, 6 Amp flush type universal, complete all as specified and directed.

S&F Switch socket combination, 5 pin, 5 Amp flush type universal, complete all as specified and directed.

S&F Switch socket multipurpose combination 2 in 1, 5 pin, 5 and 15 Amp flush type universal, complete all as specified and directed.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. for 1200 / 1400mm sweep, complete all as specified and directed.

S&F single pole switch 6A, 250V, AC black ISI duro K/555 (tumbler type switch), complete all as specified and directed by Engineer-in-Charge. Make: SSK Electrical Excellence Cat No 159 or its equivalent make as approved by GE.

S&F switch socket combined 6A, 250V, AC 3 pin black Kay/s, complete all as specified and directed by Engineer-in-Charge. Make: SSK Electrical Excellence Cat No 46 or its equivalent make as approved by GE.

S&F double pole switch 20 A x 250 V, AC in polycarbonate and glass fitted pbt kay/s, complete all as specified and directed by Engineer-in-Charge. Make: SSK Electrical Excellence Cat No 95N or its equivalent make as approved by GE.

S&F 6 pin wall socket 16A, 250V, AC in polycarbonate and glass fitted pbt kay/s, complete all as specified and directed by Engineer-in-Charge. Make: SSK Electrical Excellence Cat No 61N or its equivalent make as approved by GE.

S&F ceiling rose, 3 terminal, surface bakelite 65 mm x 50mm, PVC/poly carbonate, insulated body, complete all as specified and directed.

S&F switch piano bell push flush type 5 Amp single pole one way (ISI marked) complete all as specified and directed. Note : Colour of switches and frame will be as per existing wall colour.

S&F electric bell ding dong type, AC 230V, single pole complete all as specified and directed.

S&F electronic step fan regulator heritage pattern wooden/black colour suitable for 1200 / 1400mm sweep ceiling fan, complete all as specified and directed. Note:- Pattern and colour as approved by GE.

Supply and fixing in repair LED tube light 1x 20W wall mounted with polycarbonate housing & ultra bright, integrated heat sink, single side connection connecting up with with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. all as specified and directed.

S&F in replacement decorative wall light, gold finish fixture with cognac hammered glass diffuser suitable for 7.5 Watt LED filament lamp E27 base light fitting including connecting up with 3 core flexible copper conductor cable of suitable size complete all as specified and directed. Make: Havells Cat part No : LHFOAJD1TZ1A060 or its equivalent make as approved by GE

S&F in replacement spot (focus) track LED light fitting wall mounted or on wooden surface as per site requirement with high efficiency PMMA of 15 watt capacity, warm white colour or as directed, including connecting up with 3 core flexible copper conductor cable of suitable size, complete all as specified and directed. Make: Polycab Cat Part No-PMD0701001 or its equivalent make as approved by GE

S&F in replacement elegant suspended round moon light with spun aluminium body with high transmittance PMMA diffuser of capacity 40 watt, 6000KMOH4H60 LED light fitting including connecting up with 3 core flexible copper conductor cable of suitable size, complete all as specified and directed. Make: Cat part No : PLT0101423 of polycab or its equivalent make as approved by GE

Supply and fixing in repair LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver including suitable bracket fixed to wall/ pole complete with IP 65/66 protection complete all as specified and directed.

S&F Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

S&F in repair LED adore lamp CDL 10 /12 watt with holder base (B22) type, complete all as specified and directed. Make: Havells Cat part No : LHLDEUEEML8R010 or its equivalent make as approved by GE

S&F in repair sheet metal enclosure for DBs, vertical TPN double door (IP43), 4 ways built in bus bars suitable for 415 volts, AC, 50 Hz and suitable for TP/FP MCCB of capacity 200 Amps as incommer and out going SP/TP MCBs complete all as specified and directed. Note:- MCBs shall be measured and paid separately.

S&F in repair sheet metal enclosure for DBs, vertical TPN double door (IP43), 4 ways built in bus bars suitable for 415 volts, AC, 50 Hz and suitable for TP/FP MCCB of capacity 100 Amps as incommer and out going SP/TP MCBs complete all as specified and directed. Note:- MCBs shall be measured and paid separately.

S&F in repair sheet metal enclosure for DBs, TPN double door (IP43), 8 ways built in bus bars suitable for 240 volts, AC, 50 Hz , including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified and directed.

S&F in repair sheet metal enclosure for DBs, SPN double door (IP43), 8 ways with 200 amps rated bus bar suitable for 240 volts, AC, 50 Hz, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified and directed.

S&F in repair MCB TPN 40-63 amps 415 volts 10 KA 'C' series, complete all as specified and directed.

S&F in repair MCB SPN 40-63 amps 415 volts 10 KA 'C' series, complete all as specified and directed.

S&F in repair MCB single pole 6 to 32 amps 240 volts 10 KA 'C' series complete all as specified and directed.

M&L for laying & testing of cable in trenches/poles XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 3.5 core 95 sqmm incl taking out old cable, complete all as specified & directed.

Exc in trenches not exc. 1.5m wide and not exc 1.5 m depth for foundation of poles, stay assy etc and getting out in hard/dense soil complete all as specified and directed for stay, poles & cable all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers not exc. 25 cm thick each complete all as specified and directed.

Removing excavated material to a distance not exc. 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point of any type of soil complete all as specified and directed.

M&L for clean dry sharp sand as in cushioning to under ground cable laying 15cm thick before laying and 8cm after laying the cable in trenches for cable cushioning, complete all as specified and directed.

Supply and laying sub class `B` bricks laid dry flat transversely along the length of cable with width equal to the length of bricks over sand cushioning as protection cover of cable laid, complete all as specified and directed.

S&F in replacement of GI pipe light grade 40 mm bore for cable protection fixed on poles or laid in trenches, under floor, road, ducts etc with fixing clamps, nuts bolts etc complete all as specified and directed.

M&L for Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and precast RCC cover 40mm thick reinforced with 8 mm dia TMT bars @ 100mm c/c on both sides and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion, all as specified and directed.

M&L for Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron earth lead strip 32x6mm by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 3 of 2009 SSR Pt-I and testing complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earthing pit and cover 55mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) common salt, charcoal and testing on completion, complete all as specified and directed.

S&F in replacement Sub main wiring with single core cable 2x 6 Sqmm FRLS insulated unsheathed stranded copper conductor cable 1100 Volts grade, drawn through PVC casing/capping 25 mm dia ISI maarked fixed on wall/ceiling, alongwith 1x 6 Sqmm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly, complete all as specified and directed. Note:-Two runs of 6 sqmm cable alongwith one run of 6 sqmm PVC insulated unsheathed copper conductor as earth wire incl casing caping shall be measured as one unit.

S&F in replacement Sub main wiring with single core cable 2x 10 Sqmm FRLS insulated unsheathed stranded copper conductor cable 1100 Volts grade, drawn through PVC casing/capping 25 mm dia ISI maarked fixed on wall/ceiling, alongwith 1x 10 Sqmm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly, complete all as specified and directed. Note:-Two runs of 10 sqmm cable alongwith one run of 10 sqmm PVC insulated unsheathed copper conductor as earth wire incl casing caping shall be measured as one unit.

S&F in replacement Sub main wiring with single core cable 2x 16 Sqmm FRLS insulated unsheathed stranded copper conductor cable 1100 Volts grade, drawn through PVC casing/capping 25 mm dia ISI maarked fixed on wall/ceiling, alongwith 1x 16 Sqmm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly, complete all as specified and directed. Note:-Two runs of 16 sqmm cable alongwith one run of 16 sqmm PVC insulated unsheathed copper conductor as earth wire incl casing caping shall be measured as one unit.

S&F in repair single pole and neutral enclosure with a two pin and metal earth plug and socket complete with & incl one single pole MCB of 20 Amps complete all as specified and directed.

JAMWAL CONSTRUCTION CO (BID ID -3469739)

SHEETAL DOTLINE COMMUNICATION SYSTEMS PVT LTD (BID ID -3470389)

M/S BHATT TRADERS (BID ID -3477412)