Providing LWSS to PC habitation in Arki Constituency from Gambar khad in Tehsil Arki Distt. Solan (HP)

Amount

Excavation in foundation, trenches etc. for pipes and pits upto all depths including shoring ,struting and timbering in all kinds of soil such as spade work, pick work, jumper work, blasting work,kankar, mooram singles including decomposed in soft /hard work ,wedging out of hard and soft rocks where blasting is prohibited, in saturated soil including bailing out the water or bailing out water or Pumping out water by cutting in slopes where ever required, in rocky portion suitable anchorage shall be provided (anchorage will be paid separately) and stacking the excavated materials not more than 3.00 meters clear from the edge of excavation and then returning the stacked soils in 15 cm (fifteen centi meter) layer when required into sides of trenches and above the laid pipes etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil in all leads and lifts . After disposal ,the surface shall be neatly dressed and leveled to its original shape complete in all respect as per direction of Engineer in charge.

Earth work in foundation for digging well in dry excavation from ground level upto the level where wall curb is placed including depositing soils in 20 meters radius and filing space out side the well after completion (in all kinds of soil including all leads and lifts complete in all respect as per direction of Engineer in charge.

Wet well sinking in gravel including all pumping shoring etc. within all leads and lifts complete in all respect.

From surface level to 3 metres below S.L.

Exceeding 3.00 meters but upto 6.00 meters below S.L.

Exceeding 6.00 meters but upto 9.00 meters below S.L.

Lowering steel well curb in the pit and assembling in position including all leads and lifts complete in all respect.

When depth is upto 3.00 meters from ground level including all leads and lifts complete in all respect.

When depth is ,more than 3.00 meters from Ground level including all leads and lifts complete in all respect.

Steel work welded in built up sections, trusses and framed work including cutting, hoisting and fixing in position and applying a priming coat of red paint :-

In Beams joints channels, angles tees, flats with connection plates or angle cleats as in main and cross beams, hip and jack rafters,purlins connected to common rafters and the like including all leads and lifts complete in all respect.

In grating framed guard bars, ladders railing, brackets and similar works including all leads and lifts complete in all respect,.

Random rubble masonry/ polygonal rubble masonry(Uncorsed/brought to courses) with hard stone of approved quality in foundation & plinth including levelling up with cement concrete 1:6:12(1Cement: 6 Sand) i/c carriage of materials upto all leads and lifts complete in all respects.

Providing and laying cement concrete work 1:1 ½ :3 (1 Cement :1 ½ Sand : 3 graded stone aggregate 20mm nominal size)and curing complete excluding cost of form work and reinforcement for reinforced concrete work in :-

foundations ,footings bases of columns and the like and mass concrete work complete in all respects

Walls any thickness (but not less than 0.10meter thickness) including attached pilasters,buttresses plinth and string courses etc. from top of foundation(level) upto floor two level including all leads and lifts etc.complete in all respects

c) Side of beams , beam haunchings, cantilivers, lintels etc.

columns, pillars, posts and struts upto floor two level including all leads and lifts complete in all respect.

Providing and laying no fine concrete 1:4(1 Cement :4 stone aggregate 40mm nominal size) and curing complete in foundation and plinth excluding cost of form work within all leads and lifts complete in all respect.

Providing form work with mild steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for insitu reinforced concrete work and plain concrete work in:

Ffoundation ,footings,basis of columns etc. and mass concrete including all leads and lifts complete in all respect.

Edges of slab including all leads and lifts complete in all respects

Flat surfaces such as soffits of suspended floors,roofs,landings and the like floors etc. upto 200mm in thickness including all leads and lifts etc.complete in all respects.

Sides of beams, beam haunchings, cantilevers,bressumers and lintels etc. including all leads and lifts complete in all respect

Vertical surfaces such as walls(any thickness )partition and the like including attached pillasters, buttresses plinth and string courses and like including all leads and lifts etc. complete in all respects.

columns, pillars,posts and strutus square,rectangular or polygonal in plan including all leads and lifts complete in all respect

Beams, cantilevers,girders and lintels sides and soffits of beams, beam haunchings, cantilevers,bressumers and lintels not exceeding 1.00 meters in depth r including all leads and lifts complete in all respect

Slopping or battering surfaces including folded plates where inclination to horizontal does not exceed 30 degree including all leads and lifts complete in all respect

Stair cases with sloping or stepped soffits excluding landings including all leads and lifts complete in all respect

Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete upto floor two level including cost of binding wires and carriage of materials upto all leads and lifts complete in all respects.

Providing and fixing 200mm wide cast iron rungs with chequarred ribbed non slipsurface including fixing man holes with 200x200mmx100mm cement concrete 1:3:6(1 Cement :3 Sand: 6 graded stone aggregate 20mm nominal size within all carriage of materials upto all leads and lifts complete in all respect.

Square rubble masonary coursed with hard stone of approved quality in foundation and plinth including raking out joints in cement mortar 1:4(1 Cement :4 Sand)including all carriage of materials upto all leads and lifts complete in all respect.

Supplying and fixing woven plain G.I. fencing of mesh 50 to 150 mm to any type of standard rails straining bolts etc. including provision of binding wire strabler etc. including all carriage of materials upto all leads and lifts complete in all respect.

Providing Corrugated G.I. sheet roofing fixed with galvanized iron J or L hooks bolts and nuts 8mm dia metres with bitumen and G.I. limpet washers filled white lead complete excluding the cost of purlins rafters and trusses complete 0.63mm thick sheet i/c all leads and lifts complete in all respect.

Providing ridges or hips 60cm over all in plain with pre painted G.I. sheet fixed with J or L hooks bolts and nuts 8mm dia G.I. limpet and bitumen washers complete 0.63mm thick sheet including all leads and lifts complete in all respect.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint brushing to gtive an even shade including cleaning the surface all dirt,dust and other foreign matter with ready mixed paint other then white including all leads and lifts complete in all respect.

20mm cement concrete topping 1:2 to 3 and (1 cement :2 to 3 stones aggregate of size 4.75 mm and below, by volume) laid over and finished monolithic with base concrete within all leads and lits complete in all respect.

Applying mode rent solution on new G.I. sheet for preparation of surface for painting 5 Ltr. 100Sqf of surface and rubbring the solution with brush i/c throughly brushing cleaning of all dirt dust and all oil, grease etc. with in all leads and lifts complete in all respects.

10mm cement plastering in single coat on fiar side of brick/concretre wall for internal plastering upto floor two level including arrises internal rounded, angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:3(1 Cement :3 Sand) including all leads and lifts complete in all respects.

Boulder filling behind retaining wall and create wall and arround the percolation well within all leads and lifts complete in all respect.

Stone pitchining properly hard packed filling interstices with spalls stone earth etc. complete in all respects. Horizontal

Providing and laying cement concrete 1:3:6(1 Cement :3 Sand : 6 graded stone aggregate 20mm nominal size)and curing complete excluding the cost of form work in foundation and plinth including all carriage of materials upto all leads and lifts completein all respect.

Providing and laying cement concrete 1:1:2 (1cement :1 sand : 2 graded stone aggregate 20 mm nominal size) & curing complete excluding the cost of form work & reinforcement for reinforced concrete work in :-

foundation ,footing,bases of columns and the like and mass concrete including all leads and lifts complete in all respect.

walls(any thickness but not less than 0.10 meters thickness) attached pilasters ,buttresses, plinth and string courses etc. from top of foundation level upto floor two level including all leads and lifts complete in all respect.

Flat surface such as soffits of suspended floors,roofs,landings and the like floors etc. upto 200mm in thickness including all leads and lifts etc.complete in all respects.

Arches upto floor two level beyond 6.00 meters including all leads and lifts complete in all respect.

Prov.form work of ordinary timber plankings so as to give a rough finish i/c centring, shuttering,strutting & propping etc. ht.of propping & centring below supporting floor to ceiling not exceeding 4 mts. & removal of the same for insitu-reinforced concrete & plain concrete work in :-

Arches beyond 6.00 mtr. Span i/c carriage of materials up to all leads and lifts

Providing RCC work smooth finishing of the exposed surface with cement mortor 1:3(1Cement:3Sand) including carriage of materials upto all leads and lifts complete in all respects.

Laying and jointing in trenches GMS Tubes tube fitting (Earth work in trenches to be measured and paid for separately)including all leads and lifts complete in all respect.

80 mm dia. ( light class)

32mm dia. (Light class)

Providing and fixing Gun metel wheel valve ISI marked superior quality including carriage of materials upto all leads and lifts complete in all respects.

32mm dia.

Providing and fixing CI Sluice valve (with hand wheel) as per IS:780- 1984 class -I upto 300mm dia(i/c brass spindle & as per 2906- 1984 class-II for dia > 300mm) complete with bolts, nuts rubber insertion etc. (the tail piece if required shall be measured & paid for separatly).

80mm dia.

Constructing chamber for sluice valve, with CI surface box 100 mm top dia.,160 mm bottom dia. & 180 mm deep(inside) with chained lid RCC top 1:2:4 mix (1 cement :2 sand :4 graded stone aggregate 20 mm nominal size) 100mm thick foundation concrete 1:5:10 mix (1cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) & inside plastering with cement mortor 1 :3 (1 cement : 3 sand) finished with a floating coat of neat cement i/c curing complete. 600 x 600 x 750 mm inside size With 150 mm thick walls of RCC 1:2 :4 (1 cement :2 sand :4 graded stone aggregate 20mm nominal size) complete with form work & reinforcement with 6 mm bars at not exceeding 150 mm centres both ways.

Providing and fixing SFRC Man hole cover with frame having frames size of 560 mm internal dia.( Light duty) including carriage of materials upto all leads and lifts complete in all respects.

Providing and laying cement concrete 1:4:8(1 Cement :4Sand : 8 graded stone aggregate 40mm nominal size)and curing complete excluding the cost of form work in foundation and plinth including all carriage of materials upto all leads and lifts complete in all respect.

Providing and laying cement concrete 1:6:12(1 Cement :6 Sand : 12 graded stone aggregate 40mm nominal size)and curing complete excluding the cost of form work in foundation and plinth including all carriage of materials upto all leads and lifts complete in all respect.

Providing and laying cement concrete work 1:2:4(1 Cement :2 Sand: 4 graded stone aggregate 20mm nominal size)and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:-

foundation,footings and bases of columns etc. including all leads and lifts complete in all respect.

In columns, pillars,posts and strutus square, rectangular or polygonal in plan including all leads and lifts complete in all respect

Suspended floors, roofs,landings,shelves and their supports,balconies,beams, and girders,bressumers and cantilevers upto floor two level including all leads and lifts etc.complete in all respects.

Vertical surfaces such as walls(any thickness )partition and the like including attached pillasters, buttresses plinth and string courses and like including all leads and lifts etc. complete in all respects.

Stair cases (except spiral stair cases) excluding landing i/c preparation of surface including carriage of materials up to all leads and lifts complete in all respects.with sloping or stepped soffits excluding landings including all leads and lifts complete in all respect

Manufacturing, supplying & fixing of M.S frame 35x35x5mm with M.S sheet man hole cover 1.66mm thick made of M.S Angle 25x25x5mm with locking arrangement with lock and painting with red oxide complete in all respects as per drawing & design with in all leads & lifts complete & as per the direction of the Engineer-in Charge.

Brick work using common burnt clay building bricks in foundation and plinth in Cement mortar 1:4(1 Cement :4 Sand) including all leads and lifts complete in all respect.

2nd class bricks.

Half brick masonry in common burnt clay building bricks in Cement motor 1:4(1 Cement 4 sand) including all leads and lifts complete in all respect.

2nd class bricks.

Providing and fixing MS grooved sheet door manufactured with 1.00 mm thick sheet by fixing on angle iron frame of.25x25x5 mm an including all necessary fitting complete & applying a priming coat of red lead paint as per direction and to the entire satisfaction of Engineer- in charge with in all leads and lifts.

Providing and fixing pressed steel door,frames , manufactured from commercial mild steel sheet of 1.25mm thickness including hinges jamb block jamb,beed and if required angles threshold of mild steel angles of section 50x25mm or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means adjustable lugs with split and tails to each jamb including steel but things 2.5mm thick with guards lock strike plate and shock as specified and applying a coat of applying steel primer after pretreatment of the surfaces directly by the Engineer in charge.

Profile - A

Profile - B

Profile - C

Providing and fixing panelled and glazed shutters for doors windows and clearestory windows including black enameled iron butt hinges with necessary screws 40mm thick 2nd class deodar wood including all leads and lifts complete in all respect.

Providing and fixing wire gauge shutters using galvanised MS wire gauge of IS gauge designation 85 G with wire of dia 0.56 mm for doors windows clerestory windows including bright finished black enameled iron hinges with necessary screws 40mm thick 2nd class deodar wood including all leads and lifts complete in all respect.

15mm thick cement plaster in single coat on rough side of brick/stone /concrete walls for interior plastering upto floor two level including arrises, internal rounded angles,chamfers and /or rounded angles not eexceeding 80mm in girth and finished even and smooth in :-

In Cement mortor 1:6(1 Cement :6 Sand)

20mm cement plaster in single coat on the rough side of brick/stone masonry for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and or rounded angles not exceeding 80mm in girth and finished even and smooth lincluding all leads and lifts complete in all respect

Cement motar 1:6(1 Cement : 6 Sand)

6mm cement plaster to ceiling including all leads and lifts complete in all respect

In Cement mortor 1:3(1 Cement :3 Sand)

White washing with lime on undecorated wall surfaces (two coats) to give an even shade including thoroughly brooming the surface to remove all dust dirt and other foreign matter complete in all respect.

Distempering(two coats) with oil bond washable distemper of approved brand and manufacture and of required shade or undecorated wall surface to given an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer including all leads and lifts complete in all respect.

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces(two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials complete in all respect.

Pre cast terrazzo tiles 20mm thick (with marble chips of specified size laid in floor treads of steps and landing on a bed of 10mm average thickness cement mortar 1:6(1 Cement :6 Sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles(where ever required) silvery grey including rubbing and polishing complete in all leads and lifts complete in all respect.

In treads of steps and landing complete in all respect.

In Skirting & riser ofsteps and dado in C.M 1:3 (1Cement : 3 Sand) jointed with white sulary, selvary .

Applying priming coat over new wood and wood base surfaces after and including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter, sand papering and knotting etc.. With ready mixed paint brushing wood primer pink including all leads and lifts complete.

Painting two coat (excluding priming coat) on new wood and wood based surface with enamel paint brush in to give and even shade including cleaning the surface of all dirt,dust and other foreign matter sand papering and stopping etc. with enamal paint other than white including all leads and lifts complete in all respect.

Providing and fixing of M.S. grill of required pattern in wooden frame of window etc. with MS rounded headed bolts and nuts and screws plain grill including all leads and lifts complete in all respect.

a) Plain grill.

Stone soling properly hand packed filling interstices with spalls and consolidating with power road roller to the required gradient and camber including sperading watering and rolling of binding materials moorum or earth etc. 100mm spread thickness (finished work including materials and labour) as directed by thee Engineer- in Charge with in all leads and lifts complete in all respects.

Providing and fixing anodized aluminum sliding door bolts with nuts and screws complete in all respect.

Providing and fixing anodized aluminum tower bolts barrel type with screws etc. complete in all respect.

200mm x 10mm

Providing and fixing anodized aluminum handles complete in all respect.

Providing and fixing 40x3mm flat iron hold fast 40cm long including fixing to frame with 10mm dia meters bolts nuts and wooden plug and embedding in cement concrete block 30x10x15cm 1:3:6(1 Cement :3 Sand: 6 graded stone aggregate 20mm nominal size) within all leads and lifts as directed by the Engineer in charge .

Providing plinth protection 50mm thick in cement concrete 1:3:6(1 Cement :3 Sand: 6 graded stone aggregate 20mm nominal size) including all leads and lifts complete in all respect.

Providing and fixing brick tiles over mumty roofs grouted with cement mortar 1:3 over a 12mm layer of cement mortar 1:3 and finished neatly ,within all leads and lifts and as directed by the Engineer in charge complete in all respect.

Steel work welded in built up sections, trusses and framed work including cutting, hoisting and fixing in position and applying a priming coat of red paint :-

In R.S joists angles tees etc.

Providing and fixing of finalax pipe 40mm dia under floor(for connection cables)including all fitting i.e. elbows,sockets etc.complete in all respect.

Supplying and fixing galvanised steel barbed wires(IS 278-1962 Type-I) Weighting 9.38 kg per 100 meters (minimum) straining and fixing to any type of standard rails,straining the bolts, including securing with and provision of GMS wire, staples or steel pins(posts and struts of wood/concrete/steel etc. and straining bolts shall be paid for seperately) i/c all leads and lifts complete in all respect.

Wiring for light point Fan point/Exhaust fan/Call bell point with 1.5mm2 PVC insulated head resistant flame retardant (HRFR) and low smoke single core(flexible)copper conductor cable in surface/recessed PVC conduit with modular switch, modular plates, suitable G.I box and earthing the light point with 1.5 sq.mm (HRFRLS/ PVC insulated single core copper conductor cable as required Group-C (209-HPSR 2009) including all leads and lifts complete in all respects

Wiring for plug with 2x4Sq.mm PVC insulated resistant flame retardant(HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No 4 sqmm HRFRLS/PVC insulated single core copper conductor cable for earthing as required(214-HPSR 2009) including all leads and l;ifts complete in all respects.

Wiring for circuit sub main with following size PVC insulated heat resistant flame retardant (HRFR) and Low smoke single core(flexible)copper conductor cable in surface/recessed PVC conduit along with 1 No. 4 Sq.mm HRFRLS/PVC insulated single core copper conductor cable for earthing as required complete in all respects(216-HPSR 2009)respects.

2x1.5Sq.mm

Supply and fixing of following rating, double pole(single phase & neutral) 240 volts, residual current circuit breaker(RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required(1730-HPSR-2009) Cat. A 63 Amperes complete in all respects.

Supply and fixing of following rating, double pole 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc.as required (1718-HPSR-2009) 63Amperes Cat-A complete in all respects.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus-bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels inter-connections, phosphatizes and powder painted, including earthing etc. as required double door 12 way (1809-2009) complete in all respects.

Supply & erection of 6 Amps, to 32 amps, rating, 10 KA breaking capacity, 240 volts, “ C” curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required single pole & neutral Cat.- A (1703-HPSR 2009) complete in all respects.

Supply and fixing wall mounted metal board of welded construction fabrications with minimum 25x25x3mm angle iron frame work with 20mmx23mmflat iron as inter mediate including painting etc. as required including all leads and lifts complete in all respects.

Supply and fixing metal box of 180mmx100mmx60mm deep(nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6 pin 15/16 Amperes sockets outlet and 15/16 Ampere piano type switch connections, oainting etc. as required( 926-2009) including all leads and lifts complete in all respects.

Providing , Installation, testing and comissioning of ceiling fan with regulator including wiring the down rodof standard length(up to 30cm) with 16/0.20mm twin twusted flexible, xotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required 1200mm sweep Cat.-A(2501-2009) including all leads and lifts complete in all respects.

Providing and fixing ultra slim decorative extruded box fixture with domestic electronic ballast, snap-on installer, suitable for 28 watt FTL(T5), complete with all accessories(including one no T-5 Tube), connections, testing and commissioning etc. as required 1x28watt FTL(T5) Cat. A(2611-2010) including all leads and lifts complete in all respects.

Providing and fixing C.F.L Bulbe of 23 Watt. As required including all leads and lifts etc. complete in all respects.

Providing and fixing of service wire on the pump house including all leads and lifts complete in all respects.

Providing/fixinf and commissioning of HPSV street light including 150 watt. Sodiun valve with deep drawn alluminium lamp including all weather proof cast alluminuim control gear box mounted on a detachable metal tray for easy maintance inside/outside the lamp housing finished with white enameled by means of scientifically designed electro brightened and inner side reflector ensuring high light out put from the tantern and cleare acrylic bowl of high trans parency fitted with synthetic rubber gasket to secrure the loop housing by mean of four loggiet it render the tantern relectful enclosed and weather proof of GEC/phlipd/Bajaj/CROMPTON/GROFTON make can be adjusted with 32mm dia pipe and bend one meter of suitable angle including fixing nuts and bolts and clamps & making hook to G.I pipe etc. complete in all respect(G.I. pipe shall be issued by the department free of cost )

Providing and fixing 85 watt. C.F.L bulbe including all leads and lifts complete in all respects.

Providing and fixing Kit-Kat 200 Amperes including all leads and lifts complete in all respects.

Providing and fixing Kit-Kat 500 Amperes including all leads and lifts complete in all respects.

RISING MAIN RAW WATER STAGE & 1ST. STAGE Providing, laying, & commissioning at site in trenches to be beveled ended pipe conforming to IS/ISO:3183-2007 (Latest with up to date amendments) having minimum wall thickness as specified below & capable of withstanding required test pressure as prescribed in IS/ISO code, in random lengths of 5.5 to 6.5 mtr. The pipe ends shall be levelled suitable for butt welding, including the cost of jointing with butt welding confirming to IS 816-1969 or latest applicable and with uptodate ammendments (leak proof) in three layers at site of work with welded rods of Advani/oeriliken make/ISI marked (welded rods 3mm to 4mm) and all allied accessories whatever required for welding at site, tail pieces,tee bends & other special manufactured from parent pipes as applicable to the particular reach and of approved specification as per site conditions. and cutting of pipes wherever required as per site requirement including carriage in all leads & lifts and as directed by the Engineer-In-Charge. The pipe shall have zinc coating inside & outside confirming to IS-4736-1986 or latest with upto date ammendments & shall be marked API X-70 L-485 . The laying shall confirm to BIS 5822-970 or latest with upto date ammendments to the entire satisfaction of Engineer-In-Charge. (Earth work & cost of MS Flanges after 100meter length shall be measured & paid for seperately.) including all leads, lifts and carriage of materials at site and as per direction and to the entire satisfaction of the Engineer-In-Charge. 150 mm dia. API 5L X-70

RDs Length Dia of Class of Wall thickness Weight Flange Table From to pipe pipe in mm

Providing laying & jointing in trenches galvanised mild steel tube (Heavy grade) of following diameters confirming to IS-1239 as specified below jointed with butt welding according to relevent BIS code 816-1969 including all short pieces bends, tees and other specials etc. made from parent tubes as applicable for the particular reach and of approved specifications as per site conditions including flushing, cleaning and hydraulic testing complete to the best satisfaction of the Engineer-in-Charge. The laying of pipes should confirm to BIS code 5822-1970 with in all leads and lifts complete in all res pects 150mm dia.

Providing laying & jointing in trenches galvanised mild steel tube (Mediumy grade) of following diameters confirming to IS-1239 as specified below jointed with butt welding according to relevent BIS code 816-1969 including all short pieces bends, tees and other specials etc. made from parent tubes as applicable for the particular reach and of approved specifications as per site conditions including flushing, cleaning and hydraulic testing complete to the best satisfaction of the Engineer-in-Charge. The laying of pipes should confirm to BIS code 5822-1970 with in all leads and lifts complete in all res pects 150mm dia.

Providing, laying, & commissioning at site in trenches to be beveled ended pipe conforming to IS/ISO:3183-2007 (Latest with up to date amendments) having minimum wall thickness as specified below & capable of withstanding required test pressure as prescribed in IS/ISO code, in random lengths of 5.5 to 6.5 mtr. The pipe ends shall be levelled suitable for butt welding, including the cost of jointing with butt welding confirming to IS 816-1969 or latest applicable and with uptodate ammendments (leak proof) in three layers at site of work with welded rods of Advani/oeriliken make/ISI marked (welded rods 3mm to 4mm) and all allied accessories whatever required for welding at site, tail pieces,tee bends & other special manufactured from parent pipes as applicable to the particular reach and of approved specification as per site conditions. and cutting of pipes wherever required as per site requirement including carriage in all leads & lifts and as directed by the Engineer-In-Charge. The pipe shall have zinc coating inside & outside confirming to IS-4736-1986 or latest with upto date ammendments & shall be marked L-210, Grade A. The laying shall confirm to BIS 5822-970 or latest with upto date ammendments to the entire satisfaction of Engineer-In-Charge. (Earth work & cost of MS Flanges after 100meter length shall be measured & paid for seperately.) including all leads, lifts and carriage of materials at site and as per direction and to the entire satisfaction of the Engineer-In-Charge. 200 mm dia. L-210, Grade A

Supply of Kirloskar/Kilburn/IVC/Fouress/Gled/BHEL/Leader/Bir/Kartar/Pelocon make of suitable size Cast Steel double flanged swing check type reflux valve having by pass arrangement & size equal to dia os rising main for with standing nominal seat pressure 150mm dia( Class ASA-300)

Supply of Kirloskar/Kilburn/IVC/Fouress/Gled/BHEL/Leader/Bir/Kartar/Pelocon make of suitable size Cast Steel double flanged swing check type reflux valve having by pass arrangement & size equal to dia os rising main for with standing nominal seat pressure 150mm dia( Class ASA-600)

Supply of Kirloskar/Kilburn/IVC/Fouress/Gled/BHEL/Leader/Bir/Kartar/Pelocon make of suitable size Cast Steel double flanged swing check type reflux valve having by pass arrangement & size equal to dia os rising main for with standing nominal seat pressure 150mm dia( Class ASA-900)

Providing, welding and fixing M.S. plate flanges of various dia (nominal bore) of following Flange Tables confirming to IS 6392-1971 or latest with up to date amendments to MSERW / GI pipe after every 100 mtr. pipe or as per site requirement including cutting of of pipes wherever required, welding in three layers (leak proof) confirming to specifications as prescribed in relevant I.S. Code i.e. IS 816-1969 or latest as applicable with up to date amendments with nuts, bolts & washers & specials etc. confirming to IS-1963 or latest with up to date amendments including packing sheet i.e. asbestos fibre sheet minimum 3mm thick and painting with anticorrosive paints complete in all respect in all leads, lifts and carriage of material at site and as directed by the Engineer in charge.

RDs Length Dia of Flange Table From to pipe

Providing and fixing C.I double action Air valve having 75mm dia ball for 50mm with screwed hex nipple suitable for flanged connection with pipe and tested complete.

DISTRIBUTION SYSTEM Providing Laying and jointing in trenches GMS tube with fittings such as bends,tees,Unions, Nipples and other specials in distribution system (earth work in trenches to be measured and paid for separately) including all carriage of materials upto all leads and lifts complete in all respect.

25mm dia

32mm dia (Light class)

40mm dia (Light class)

50 mm dia (Light class)

65mm dia (Light class)

80mm dia. (Light class)

100mm dia. (Light class)

150mm dia (Medium class)

200mm dia

HOUSE HOLD CONNECTION

Providing Laying & jointing G.I pipe for house hold connection with 15mm dia (light class) i/ c G.I fitting fitting i.e. ferruule 15mmdia, union 15mm dia, Elevo 15mm dia, G.I Nipple 15mm dia 150mm long, G.I socket 15mm dia, Gate valve 15mm dia & installation charges (earth work in trenches to be measured and paid for separately) including all carriage of materials upto all leads and lifts complete in all respect.

Providing and fixing cast iron Bulk water meter enclosed type (superior quality) of various dia with in all leads and lifts complete in all respects.

65mm dia

50 mm dia

40 mm dia

Providing and fixing cast iron water meter Woltman type megnetic Drive (Superior quality) of various dia with in all leads and lifts complete in all respects.

200mm dia

150mm dia (MC)

100mm dia

80 mm dia

AUTOMATION BOOSTER STAGE Controller for Automatic pump control to meet the protection and control criteria with enclosed at Annexure.II (Make model to be quoted by the bidder/Contractor) alongwith user interphase of single user interface of (preferably 8" colour touch screen or equivalent) alongwith embedded electronic controller with following functionalities:-

Enable user to program start/stop pump as per progrmmed timings with in all leads and lifts complete in all respects.

The Automatic pump control system should function in th ree modes of operation namely Manual/Semi Auto/Full Automatic Modes of Operation namely Manual/Semi Auto/Full Automatic mode with in all leads and lifts complete in all respects.

Manual mode of operation should allow user to start/stop the pump independently with in all leads and lifts complete in all respects.

Semi Auto Mode should allow the pump to operate with/ wihtout level control with in all leads and lifts complete in all respects.

Auto Mode should allow complete automatic functioning of system with level control of supply tank with in all leads and lifts complete in all respects.

The Automation system should have provision to have GSM Connectivity for Monitoring and control in future with in all leads and lifts complete in all respects.

Control panel suitable for housing all electrical and electronics operation on 440(+/-)10% volts 50 Hz 3 phase ac supply. The control panel should have 30% extra space for any future additions with in all leads and lifts complete in all respects.

Soft starter of appropriate rating for motor specified in Annexure.A-I for the purpose of controlled starting of the pump and take care of single phasing and phase reversal(Make model to be quoted by the bidder/).contractor with in all leads and lifts complete in all respects.

Float type two point low/high level monitoring system of water supply tank for integration with controller for automatic pump control. (Make mode to be quoted by the bidder/contractor) with in all leads and lifts complete in all respects.

Single phase prevention for protection against phase reversal & single phasing with in all leads and lifts complete in all respects.

MCB of appropriate capacity suitbale for the above specified motor in Annexure.I of L&T/Havells Siemens/Allen Bradley of equivalent make for mains ON/Off to the panel (Make Model to be quoted by the bidder/contractor). with in all leads and lifts complete in all respects.

3 phase LED type 22 dia indicator lamps in Red, Yellow and Green colour with in all leads and lifts complete in all respects.

LED type-22 dia Green colour indicator for mains ON, Power ON, system Standby- Overload, Sump/Bore Full, Fault Indicator Lights, Run Indicator light with in all leads and lifts complete in all respects.

Electronic Protection device for 3 phase/3 wire under voltage/over voltage and monitoring incoming power supply. The device should have individual ICO potential free contact for over voltage and under voltage with in all leads and lifts complete in all respects.

Uninterrupted power supply (On line) of 220 VAC/50 Hz.single phase for 6 hrs.backup for ensuring smooth functioning of the system with in all leads and lifts complete in all respects.

Control panel suitable for housing all electrical and electronics operation on 440 (+/-)10% volts 50 Hz 3 phase AC supply with 30% extra space for any future addition with in all leads and lifts complete in all respects.

Complete wiring field & contlrol panel shall be supplied with the control system with in all leads and lifts complete in all respects.

Programming and Testing of system at site with in all leads and lifts complete in all respects.

Erection, commissioning and installation of all equipment from Sr.No.91 to 103 required as per site conditions and as per direction of Engineer-in-charge complete in all respect.

AUTOMATION 1ST STAGE Controller for Automatic pump control to meet the protection and control criteria with enclosed at Annexure.II (Make model to be quoted by the bidder/Contractor) alongwith user interphase of single user interface of (preferably 8" colour touch screen or equivalent) alongwith embedded electronic controller with following functionalities:-

Enable user to program start/stop pump as per progrmmed timings with in all leads and lifts complete in all respects.

The Automatic pump control system should function in th ree modes of operation namely Manual/Semi Auto/Full Automatic Modes of Operation namely Manual/Semi Auto/Full Automatic mode with in all leads and lifts complete in all respects.

Manual mode of operation should allow user to start/stop the pump independently with in all leads and lifts complete in all respects.

Semi Auto Mode should allow the pump to operate with/ wihtout level control with in all leads and lifts complete in all respects with in all leads and lifts complete in all respects.

Auto Mode should allow complete automatic functioning of system with level control of supply tank with in all leads and lifts complete in all respects.

The Automation system should have provision to have GSM Connectivity for Monitoring and control in future with in all leads and lifts complete in all respects.

Control panel suitable for housing all electrical and electronics operation on 440(+/-)10% volts 50 Hz 3 phase ac supply. The control panel should have 30% extra space for any future additions with in all leads and lifts complete in all respects.

Soft starter of appropriate rating for motor specified in Annexure.A-I for the purpose of controlled starting of the pump and take care of single phasing and phase reversal(Make model to be quoted by the bidder/).contractor with in all leads and lifts complete in all respects.

Float type two point low/high level monitoring system of water supply tank for integration with controller for automatic pump control. (Make mode to be quoted by the bidder/contractor) with in all leads and lifts complete in all respects.

Single phase prevention for protection against phase reversal & single phasing with in all leads and lifts complete in all respects.

MCB of appropriate capacity suitbale for the above specified motor in Annexure.I of L&T/Havells Siemens/Allen Bradley of equivalent make for mains ON/Off to the panel (Make Model to be quoted by the bidder/contractor) with in all leads and lifts complete in all respects.

3 phase LED type 22 dia indicator lamps in Red, Yellow and Green colou with in all leads and lifts complete in all respects.

LED type-22 dia Green colour indicator for mains ON, Power ON, system Standby- Overload, Sump/Bore Full, Fault Indicator Lights, Run Indicator light with in all leads and lifts complete in all respects.

Electronic Protection device for 3 phase/3 wire under voltage/over voltage and monitoring incoming power supply. The device should have individual ICO potential free contact for over voltage and under voltage with in all leads and lifts complete in all respects.

Uninterrupted power supply (On line) of 220 VAC/50 Hz.single phase for 6 hrs.backup for ensuring smooth functioning of the system with in all leads and lifts complete in all respects.

Control panel suitable for housing all electrical and electronics operation on 440 (+/-)10% volts 50 Hz 3 phase AC supply with 30% extra space for any future addition.

Complete wiring field & contlrol panel shall be supplied with the control system with in all leads and lifts complete in all respects.

Programming and Testing of system at site with in all leads and lifts complete in all respects.

Erection, commissioning and installation of all equipment from Sr.No.106 to 119 required as per site conditions and as per direction of Engineer-in-charge complete in all respect with in all leads and lifts complete in all respects.

SUBMERSSIBLE PUMPING MACHINARY BOOSTER STAGE

Providing and installing submersible pump confirming to ISS 8034-1976 alongwith directly coupled submersible type squirrel cage electric induction motor suitable for operation on 230volts, 1 Phase 50 C.P.S. A.C. supply ,water lubricated bearing and provided with pivoted segment type thrust bearings to with stand non vertical lead with minimum wear and tear and dully fitted with device to take upto the expansion of water with heating of motor complete in all respect including entire carriage of materials upto all leads and lifts . Please see the specification and other terms and conditions of pumping mechinery with HP in PDF file attached i) Discharge of Pump:- 22.67LPS ii) Static Head :- 25.00 Mtr. iii) Total Head :- 29.67 Mtr. iv) BHP required:- 2 x15H.P. = 30 v)Rising Main 200mm dia= 300 Rmt.

Supply and fixing of control panel for submersible pump complete with sheet and angle iron, fabricated dully painted and complete with internal wiring and comprising of air break starter main switch of suitable Amp. D.P. volt meter, ammeter, phase indicating lamps water level guard,Timer and cotector for making sami Automation and single phase preventer , including entire carriage of materials upto all leads and lifts.

Supply and fixing PVC insulated copper submercible cable 1.5mm2 or suitable size and capacity to and all other electrical equipment as per IS 1553(P-1) 1988 or latest amendment of L&T and Havles make including all leads and lifts complete in all respects.

PUMPING MACHINARY MAIN STAGE

Providing horizontal spindle horizontal split casing/end suctions (back full out arrangement) single/double/ multistage centrifugal pump or combination of pump in series of recommended make such as Mather and Platt/KSB/Kirloskar/Becon weir/BE/Jyoti as per IS-1520-1980 / IS 5659 - 1970 with up to date amendments, read with IS: 9137-1978 or latest edition suitable for lifting clear / raw water for under mentioned characteristics with bronze impellers/priming funnels, casing ring and shaft sleeves of bronze, shaft of steel grade EN-8 with cast iron casing coupled directly through a flexible coupling on a MS/Cast steel base plate ( base plate to be from the manufacturers of the pumping unit only) to Squirrel Cage / Slipring drip proof induction motor of standard make such as Kirloskar/Crompton/Bhel/NGEF/GEC/Siemen/Jyoti/ABB and suitable for operation on 400 (+)/-) 10% volts, 50 cycles/second, 3 phase AC electric supply. The power of electric motor should be at least 10% in excess of the maximum power required by the pump in the operation range of (+) 10% and (-) 25%of the duty point head. The motor should be as per IS: 325-1978 with up to date amendments read with IS: 900-1972. It should include cost of bearing nuts, bolts and pointing etc. and should meet the following requirements:- Please see the specification and other terms and conditions of pumping mechinery with HP in PDF file attached Discharge: 17.00 LPS Total head : 1153.92 Mtr. (a) LWL in sump well (h) : Mtr. (b) Shaft level : Mtr. (c ) Level at discahrge point : Mtr. (d) Suction lift : 3.00 Mtr. (e) Residual head : Mtr. (f) Static head : 933.00 Mtr. (i) Rising Main : (a) Length : 21500 Mtr. (b) Dia. : 150mm dia APIX-70 L-485 (iv) Pumping Hours : 16 Hours (v) Altitude of installation above MSL : (vi) Characteristics of water : (a) Temperature: 0 C (b) Ambient temperature: 0 C (c ) Turbidity: NTU (d) Alkalinity : Mg/Ca Co3 (e) Size of the solids : mm (f) Other

Providing ICTP Main Switch with HRC fuses / Side handled operated Change over switch of L&T/Crompton/Standard/Havells make suitable capacity Operational rating as per IS: 4064 (Part - II) 1978 with up to date amendments immediately after the power meter of HPSEB

Providing M.S. sheet, steel fabricated floor mounted closed ( Almirah type) switch board including angle iron post of suitable height and size ISA 40x40x6mm, duly painted, with steel sheet of 16 gauge comprising, capable of mounting the following accessories with all internal connections:-

A.C.B./ OCB of Kilburn/ Havell/MDS/Standard/ L&T/MEI/GEC make of suitable capacity on incoming feeder with or without initial oil filling as the case may be with neutral linked under voltage releases as per IS: 2516 (Part - II) 1985 with up to date amendments with.

Earth leakage circuit breaker of Havell/MDS/INDETEC/kilburn/L&T/MEI/GEC make as per IS: 2516-1977 with upto date amendment which should have control box operating handle and trip/reset bush button on/off indicators, re-indicating off spring condition of the circuit breaker for over current protection. The circuit should be equipped with magnet thermal release with metallic tape etc. It should also be lifted with earth fault for tripping of breaker on occurrence of earth fault on off breaker load side end.

The voltage monitor relay of L&T/AE make three phase with all protection and usual indicator and electric siren against single phasing low voltage, high voltage, reverse phasing, over loading and phase voltage difference as per IS: 1248 (Part - II ) 1983 ( Latest edition).

Power factor meter of AE/L&T Rishab make as per IS: 1248 (Part - V ) 1983 ( Latest edition with up to date amendments of suitable rating.

Frequency meter of AE/ L&T Rishab make as per IS: 1248 (Part - IV ) 1983 ( Latest edition) with up to date amendments of suitable rating.

Bus bar chamber with copper strips having three bars of suitable rating for full length equal to the width of the board for three live phases and suitable for induced current, one copper bar of half the rating of full length for neutral phase as per IS: 8084-1976 and IS: 11354-1985 read with IS 5578-1985 with up to date amendments.

ICTP switches with HRC fuses of L&T/ Standard/Havells/Crompton/kilburn/Siemens make and of suitable capacity as per IS: 4064 (Part - II) -1978 with up to date amendments.

Three phase indicator lamps complete with toggle switches for individual motors as per IS: 3452 ( P-I & II) with up to date amendments.

Capacitor of L&T/Bajaj/Assian/Crompton make as per IS:2834 -1986 with up to date amendments to raise the power factor at site to 0.95 for direct connections to induction motor individually of required KVAr rating according to HP offered including cables as per relevant ISI code ( of Siemens/Glocter/IEC make) from bus bar chamber to capacitor and also including ICTP switches of appropriate range as per IS: 4064 (Part - II) 1978 with upto date amendments

Providing suitable oil immersed star delta/ direct on line/ Auto trasformer/ starter rotor starter of MEI/ Kilburn/ Jyoti/ L&T/ Siemens make as per IS: 8544 -1979 with up to date amendments for Squirrel Cage motor mounted on panel board with magnetic type overload release and dashpot time lag, under voltage release with or without initial oil filling as the case may be with single phase preventor as per IS 1248 (P-V)-1983 with up to date amendments.

Providing Hour run meter of recommended make of suitable capacity as per IS: 722 (Latest edition)

Providing double flanged cast iron sluice valve of Leader/Bhel/Kirloskar/Kilburn/GLED/Fouress /Kartar make and of 150mm dia for the suction pipe and capable of with standing the normal seat pressure and as per IS 780-1984 with upto date amendments.

Providing double flanged cast steel class ASA 600 sluice valves of Leader/Bhel/Kirloskar/KilburnGLED/Fouress make and of125 mm dia for the delivery line of pump and capable of with standing the normal seat pressure as per BS-1414 with upto date amendment.

Providing double flanged (swing type )cast steel class ASA-600 reflux valves ofLeader/Bhel /Kirloskar/Kilburn/GLED/Fouress make and of 125mm dia having by pass arrangement on delivery line of the pump and capable of with standing normal seat pressure as per BS-1868(P-I) with up to date amendments.

Providing and fixing double flanged cast steel class ASA-600 reflux valves of LeaderBhel/Kirloskar/Kilburn /GLED/Fouress make and of 150 mm dia having bye pass arrangement for rising main and capable of with standing normal seat pressure as per BS-1868 (P-I)with upto date amendments.

a) Providing 100mm dia. circular dial pressure gauge of Fiebig make complete with all accessories such as stop cock, copper tubing etc. as per IS: 3624-1987 with up to date amendments complete in all respets.

b) Providing 100mm dia. vacuum dial pressure gauge of Fiebig make complete with all accessories such as stop cock, copper tubing etc. as per IS: 3624-1987 with up to date amendments range 0 to 760 mm mercury

Installation of all the items appearing at Serial No. 124 to 131 as per the systematic drawing attached with the tender documents ( Drg.No.1)

Providing and fixing double flanged MS/ G.I. piping work layout to be approved by the Engineer-in-Charge for suction and delivery pipes suitable to pump(s) offered and common header as per the rising main respectively complete with all specials such as bends ,tees reducers/ increasers with companion flanges matching with the relevant specifications of the accessories as indicated in the drawing No.2 including rubber/asbestos gasket of minimum 3mm thickness as per IS 2712-1979 and required number of nuts and volts as per IS: 1364-1983. The pipes shall be as per relevant IS Code and to withstand 1.5 times total head stipulated under item No.1.The size of the various components to be as under:- (i) Suction pipe 150 mm dia (ii) Delivery pipe 125 mm dia (iii) Common Header 150 mm dia and will extend up to 5 meters from the outer wall of the pump house in the direction to be jointed.

Providing and laying copper PVC insulated armoured power cable ( one cable carrying all the three phases) of suitable size and capacity to and all other electrical equipments as per IS: 1554 (P-I)1988 or latest with upto date amendments of Siemens/ IEC/ICC/GICO/Grandly/National make including all other accessories such as thimbles, flexible, pipes solder, nuts and bolts, cable glands etc. laid in pipes or trenches under floor.

Providing and fixing double loop earthing and G.I. plate 600 mm x 600mm x 3mm thick electrode complete with material such as thimbles, nuts and bolts, charcoal and common salt, 25 mm x 3 mm G.I. strips & G.I. wire as per IS: 3043 -1987 with up to date amendments for motors and other electrical equipments and digging of pits etc. complete in all respect.

Unipro Techno Infrastructure Pvt Ltd

The Spunpipe and Construction Co Baroda Pvt Ltd