Development of Kalarahanga Crematorium in ward no. 02

Earth work excavation in Hard soil using one cum Bucket Hydraulic Excavator with all leads and lifts and transpotation of ecavated matiral by mechcanical means. and direction of Engg -in- charge

Supply and filling in foundation and plinth with river sand, in layers including watering, with cost, conveyance, royalties, and taxes of all materials, cost of all labour, carriage of water, sundries T & p required for the work etc all complete as per the direction of E-I-C

Cement concrete in prop. (1:3:6) in foundation using 4 cm size CBHG metal of quality from approved quarry washed and cleaned including hoisting, lowering, laying concrete, ramming, watering, curing etc lincluding cost, conveyance, royalties and taxes of all materials, with cost of all labours, sundries and T & P such as concrete mixer, concrete vibrator required for the work etc, complete as per specificationand direction of EIC

Providing and Laying Factory made Chamfered edge Cement Concrete Paver Bliocks of required strength, thickness & size/shape made by table Vibratory method , to attain superior smoth finish using PU or Equivalent moulds ,Laid in required gray colour and Pattern over 50mm thick Compacted bed of coarse sand , copmacting and proper embedding / laying of interlocking Paver Blocks into the sand bedding layer through vibratory compaction by using plate vibrator, Filling joints with Fine sand and cutting of Paver blocks as per required size/Pattern, finishing and sweeping extra sand in footpath , parks, lawns, drive ways, or light traffic parking and Lanes/Road etc, all complete as Per Manufacturers Specifications and Driection of Engg -In -Charge. 80mm thick C.C. Paver Blocks of M-40 grade With approved colour design Pattern etc. complete.

CC M-25 with 20mm size downgraded CBHG chips including all cost, conveyance, royalty and taxes etc. complete of all materials to work site as per the specificatiosn approved by the department and the directions of the Engineer-in-Charge

Labour charges for cutting, bending, binding and tying the grill including the cost of M.S. rod.

Rigid smooth centering and shuttering for RCC or CC work(F&P) including false works, supplying of centering materials, its hire charges, cost of labour T & P and dismentalling after casting the concrete etc all complete as per direction of EIC (Foundation & Plinth)

Iron work wrought and put up in trusses and purlins and posts etc. complete.

Supplying, fitting fixing of Corrugated Iron Sheet roofing including Nut Bolts etc. Complete.

Transportation cost of gci sheet and hollow section pipe