REPAIR TO GARDEN BARRICADING WALL PATH HARD STANDING PAVER BLOCK AREA DRAINAGE AND OTHER MISC BR WORK AT BALASORE

Amount

NOTE (Applicable for all items) :- The bidders/contractors are advised to read tender document & all corrigendum / amendments and General conditions of contracts before entrying/quoting the rates.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles built in cement mortar complete all as specified & directed.

M & L for Brick work with flyash bricks old size, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 etc complete all as specified & directed.

All as per Sl Item No -2 but except bricks (using old size bricks obtained from Sl Item No - 1) (cleaning of brick from mortar included in quoted rate)

M & L Brick work with old size flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified & directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings, etc. n exc 15cm thickness (below or above ground level) as in surface channel, coping etc. and removing debris and rubbish out of the premises complete all as specified & directed.

M & L for plain cement concrete 1:2:4, type B-2 (using 40 mm graded stone aggregate) as in surface channels and drains, etc. Complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped and etc complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for 15mm thick rendering in cement mortar 1:4 on brick or concrete surfaces of wall finished even & smooth complete all as specified and directed.

M & L plain cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in coping kneelers, apex stones, bed plates, kerbs, etc. complete all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M & L for Precast Reinforced Cement Concete 1:2:4 (Nominal Mix) Type B-1 using 20 mm graded stone aggregate as in cover slabs (for man holes, etc.) set in Cement Mortar (1:4) including necessary form, mould work, etc. complete all as specified and as directed.

M & L Mild steel TMT bars (Fe 500D) 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for preperation newly plastered surface of walls and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats) applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm all as specified and directed .

Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc. complete all as specified and as directed.

M & L for 15 mm thick screed bed or bedding layer for laying floor finishes in cement mortar 1:6 complete all as specified and as directed.

M & L for 25 mm thick plain cement concrete 1:2:4 type B 0 using 12.5 mm graded aggregate as in sub base to receive tiles complete all as specified and directed.

M & L Paving vitrified parking tiles 300 mm x 300 mm x 8 to 10 mm thick (heavy duty), set, jointed and pointed in neat cement slurry as in foot path with white cement and pigments complete all as specified and as directed.

M & L for Chequered cement concrete tiles 30cm x 30cm x 22-25mm thick, jointed and pointed in neat cement slurry with grey/colour cement and pigment in floors complete all as specified and as directed.

M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade with grey cement & pigment complete all as specified and as directed.

M & L for sand filling under precast concrete inter locking paver floors or in foundations including watering and consolidation complete all as specified and as directed.

M & L for 75 thick plain cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in sub base complete all as specified and as directed.

M&L for PCC 50 mm thick type C2 1:3:6 (20mm stone aggregate) as in plinth protection, paving finised even and smooth without using extra cement. Complete all as specified and directed.

M & L for preparation of newly plastered wall surfaces and applying two coats of cement based paint over a coat of primer complete all as specified and as directed.

Complete removal and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: old repaired work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and as directed.

Dismantling post or struts (wood, steel or RCC) any section incl taking out embedded portion in concrete, brick work, masonry etc and making good disturbed ground complete.

Excavating in post holes (or similar holes) in hard/dense soil each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, compete all as spd & directed

Supply only PVC coated MS galvanised chain link fencing, mesh size 75 mm x 75 mm made with 4 mm dia GI wire including taking down old one all as specified and directed.

Fixing only chain link fencing including line wires, any mesh and size and type to any type of standard, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

S & F Rolled mild steel Fe 290 (Grde-E-165) as in angle iron post with swan neck (horn) and strut or flat iron in fencing including cutting tops to shape as directed , drilling holes, notching for wire etc including necessary drilling , bolting or welding/rivetinge etc complete all as spd & directed.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured).

SPF Mild steel round bars Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde - E-165) 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

S&F for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10 cm and n.exc 15cm long with dia of the neck 5 to 10mm complete all as specified and as directed.

M&L preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.

M & L Cement concrete type C2 1:3:6 (40 mm graded aggregate) in foundations, post hole, filling and mass concrete etc complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc.

S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-410-W Gde E-250, Quality - B.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165.

M&L for one coats of synthetic enamel paint over a coat of red oxide primer on old steel surface complete all as specified and directed.

M & L for Providing and fixing concertina spiral coil fencing with punched tape concertina coil 600 mm dia and 6 m max openable length, upto 3 m height of wall with angle iron Y shaped or as described with 9 horizontal R.B.T. reinforced barbed wire stud tied with G.I. staples and G.I. clips/ GI Cotter Pin to retain horizontal, incl necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engr - in - Charge, with reinforced barbed wire tape (RBT)/spring core (2.5mm thick) wire of tensile strength of 165 kg /sqmm with tape (0.52mm thick) and weight 43.47gm/m. (Note : barbed wire shall be measured separately).

MS SUBHAM ENGINEERING AND CO

ANAND CHANDRA DAS

DANWAR AND ASSOCIATES

M/s MANIK SETHI

Bidder Name

DANWAR AND ASSOCIATES

ANAND CHANDRA DAS

MS SUBHAM ENGINEERING AND CO

Pawon Kumar Barik

M/s MANIK SETHI