12/HDA/EC ELECT/2023 2024

Amount

Supply & delivery of Hot Dipped Galvanized Iron Sheet Street Light Pole 7 Mtr. Long Swaged type with single swan neck to be extended up to 1.5 Mtr. at the top part of the pole. This specification covers the design, manufacture, testing at works of 9 mtr long (swaged type) Hot dip GI Steel tubular Pole conforming to IS: 2713 (P‐I &II)/1980 (Confirming to 410-SP-1) with GI base plate and Single Swan neck arm Bracket and latest amendment if any. (Refer to the Specification and Drawing in Annexure-II and follow Rate submission form-IV). The rate should include testing at your works, all taxes and delivery the materials at different locations of HDA planning area, BIS license & Type test report must be submit.

Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. painting. (b) 250 x 250 x 100mm

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly. (a) Upto 9.0 mtr. Size 0.6x0.6x1.70 mts.

Lifting of the running Under Ground Cable coming to the looping cable Box up to the top of the muffing above the top of the ground level by drawing through 40 mm dia rigid pvc pipe of superior Quality and tiding the same by no 10 SWG G I wire with the pole including supply of pipe & wire & filling the top of the pipe/pipe hole with bitumen and neat cementing properly (average run- 1.5 mtrs/run X 2 runs per pole).

Supply and fixing of SPMCB (Legrand/L&T) "C" Curve 1 Amp with ISI marked to be placed on a din channel of Pole and supply and fixing of Terminal connector at the suitable location of the pole.

Supply, drawing and Connection of luminaries with 3C X 1.5 Sq mm pvc insulated FR copper conductor (KEI/Finolex) through 8 mtr.G.I octagonal pole 1.5 Mtr straight arm Poles from internal Junction Box to light fittings as required.

Supplying & delivery of 90 Watt LED Street light with pressure die cast aluminum housing, IP66 protection, road way luminaire with high power LED as per the technical specifications and vendor list of UD & MA attached (Ref: No. 1528(3)-UDMA-13013(99)/3/2020-ESTT-TCP SEC-Dept. of UDMA dated. Kolkata, 08.12.2020 b) Philips (model no. BRP409 LED 115 CW SLC FG PSU GR V2.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below:

2 Core X 16 Sqmm

Finishing of the XLPE/PVC insulated armoured cable ends by soldering with cable sockets and insulated tapes etc., including supplying sockets, soldering materials, tapes etc. and making connection to switch, BDB and BBC etc.

2 Core X 16 Sqmm

Supply and delivery of 1.1 KV grade 2 C X 16 Sq mm XLPE insulated and PVC sheathed aluminum armored Cable. As per IS 7098 Part -1 with latest amendment if any. The cable should have ISI mark.[KEI/Polycab/Gloster/Havells]

Supply of HDPE Plb Duct pipe of size 32/26 mm.

Laying of one No. HDPE Pipe in underground trench 460 mm wide x 760 mm average depth including filling the trench with shifted soil, leveling up and restoring surface duly rammed.

Laying only Cable up to 50 sq.mm through existing RCC/Hume/ GI /HDPE Pipe/open masonry trench for single, 2, 3, 3½ & 4 core

Fixing only street light/ Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure. (excluding the cost of RCC Foundation)

GST @18% of Total Amount

CESS @1% of Total Amount (including GST)