Addition Alteration to ramp passage area of R and D, LWS and AC store house at MO (Kar), Addition alteration and special repairs to building No P 22 at MO (Kar) and Provision of sliding windows at INHS Patanjali at Naval Base Karwar

Amount

Demolition of unreforced cement concrete in ground floors and pavings n exc 15cm thickness below or above ground level including removing the debris outside MD land complete all as specified and as directed.

Demolition of brickwork / stone masonry / Precast concrete bloks built in CM including all quions, arches, pillars etc complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc including removing the debris outside MD land complete all as specified and as directed.

M & L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base or sub base floor etc complete all as specified and as directed.

M & L for 100m thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in sub base or sub base floor etc complete all as specified and as directed.

M & L for 3mm thick glass dividing strips of width 22mm inserted in position and conform to design complete all as specified and as directed.

M & L for precast cement concrete solid building block masonry exc 10cm width, type C5, 1:3:6 using 20 mm graded stone aggregate set in cement mortar 1:6 complete all as specified and as directed.

M & L for rendering 15mm thick plaster in CM 1:4 in two coats (10 mm backing coat + 5mm thick finishing coat) on concrete/ brick/ stone surfaces of walls finished even and smooth without using extra cement including mixing of integral water proofing compound in 5mm thick finishing coat complete all as specified and as directed. Note:- WPC shall be measured and paid seperately under respective items given below.

M&L for preparation of newly plastered surfaces of walls of any description including cornices and applying two coats of weather proof exterior emulsion paint over a coat of self primer complete all as specified and directed

Supply only integral water proofing compound all as specified and as directed.

M&L for preparation of old plastered surfaces of walls of any description including cornices and applying one coat of weather proof exterior emulsion paint complete all as specified and directed

Taking down wooden / PVC Chowkhats with shutters (without taking off shutters from the frames) exc 1.5Sqm but n exc 4Sqm including builders hardware complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing all the rubbish outside MD land complete all as specified and directed.

M&L for coloured glazed ceramic tiles (Ist quality) of size 300 x 200 x 6 to 7 mm thick on vertical surfaces such as skirting, dado and rises to steps etc., set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including rendering 10mm thick in CM 1:4 etc complete all as specified and directed.

M & L for non skid ceramic coloured tiles (Joint free tiles) (Ist quality) 7 to 8 mm thick (Square/rectangular), area of each tile exc 0.06 Sqm but n.exc 0.11 sqm as in floors etc set and jointed in neat grey cement slurry and pointed in white or coloured cement to match over and inlcuding screed bed or bedding layer 15mm thick in CM 1:6 etc complete all as specified and directed.

M & L for machine cut cudappah stone slab 20- 25mm thick over and including 15mm thick CM 1:6 cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 20 mm thick Granite (of any type) work black colour (table rubbed and polished) in steps, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over cuddapah stone slab by applying 3kg cement paste / sqm complete all as specified and directed

S & F in repairs vitreous china wash basin coloured oval type 560 x 410mm for fixing over granite platform complete but excluding pillar tap complete all as specified and as directed. Make:- Hindware cat part No:- 10017 star white or equivalent make as specified here in after.

S&F in repairs vitreous china wash down water closet (pedestal pattern) white, with plastic water closet seat & back with flat bottm and cover, MS chromium plated or aluminium anodised hinge device including fixing bolts and necessary connection with existing pipes etc complete all as specified and directed.

S & F in repairs PVC valveless, syphonic action type, low level flushing cistern 10 ltr capacity, white colour with inlet ball valve, float, handle including brackets etc complete all as specified and directed.

Supply and laying high density polyethylene (HDPE) pipes of dia 32mm and pressure rating 6 kgf/sq. Cm in trenches including bends,Tees etc and fixing materials complete all as specified and directed.

S&F in repairs brass Chromium Plated Health faucet with spring pipe all as specified and directed. Make: Jaquar Cat No ALD-CHR-585 or equivalent in makes Marc/Kohler.

S&F towel rail 600 mm long brass Chromium plated with brass Chromium plated screws all as specified and directed. Make : Jaquar cat No ACN -1111NM or equivalent in makes as specified hereinafter

S&F in repairs stop valves, cast copper alloy fancy type chromium plated with long shank and cup (concealed type) for iron pipe of 15mm bore all as specified and as directed. Make:- Jaquar Cat Part No: CON-083KN or equivalent make as specified here in after.

S & F in repairs bib taps, long neck type, cast copper alloy fancy type, chromium plated with crutch or butter fly handle, screwed for iron pipe 15mm bore all as specified and as directed. Make : Jaquar Cat No CON-107KN or equivalent make as specified here in after.

S & F in repairs Pillar taps cast copper alloy, fancy type, chromium plated with capstan heads screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe of 15 mm bore all as specified and as directed. Make:- Jaquar Cat Part No: CON-011KN or equivalent make as specified here in after.

S & F in repairs mild steel Chromium Plated grating 125mm dia suitable for Nahani trap complete all as specified and as directed.

S & F 15mm bore 450mm long PVC connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and as directed by Engr-in-Charge.

S & F solid PVC door frame of size 50mm x 47mm made out of 10mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified in drawing on sl page No 156 of SSR 2010 part –II and directed

S&F butt hinges 100 mm sizes, medium weight, cold rolled mild steel complete all as specified and directed.

S & F aluminium anodised barrel tower bolts of extruded section 100mm long all as specified and as directed.

S&F aluminum anodised sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S & F extruded aluminium alloy anodised handles, cast type of 100mm long all as specified and as directed.

M & L for preparation of old decorated wall surfaces and applying one coat of Acylic washable distemper all as specified and as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation) or insulation boards /slab /blankets of any description and thickness including frame/grid of any description all as specified and directed

S & F 10 mm thick PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of aluminium as per specification and directed

M&L for Anodised Aluminium snap grid (minimum 15 microns anodisation) of size 605 x 605 mm with anodized aluminum angle of size 40mm x 25mm x 2mm thick weighing 0.36 Kg per running meter and anodized aluminum main and cross T of size 36.50 x 23.50 x 1.50 mm thick weighing 0.254 Kg per running meter and 23.50 x 23.50 x 1.50 mm thick weighing 0.202 Kg per running meter respectively for false ceiling all complete all as specified and directed

S&F hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long suitable for size of snap grid 605 x 605 mm complete all as specified and directed

Dismantling/taking out existing hessain base felt or any other existing water proofing treatment from roof incl removing the dismantled debris to a distance exc 200m & n.exc 250m complete all as specified and as directed.

M & L for screed bed or bedding layer of mortar 15mm thick in CM 1:4 on top of roof surfaces finished even and smooth without using extra cement to receive water proofing treatment including mixing of integral water proofing compound complete all as specified and as directed. Note:- WPC shall be measured and paid seperately under respective items given above.

M/L for water proofing treatment by applying oil bound bitumen primer, having a density of 0.87 - 0.89 Kg/lit, @ 0.40 ltrs/Sqm, providing and laying 3mm thick APP modified water proofing membrane weighting not les than 3.50 Kg/Sqm reinforced with non woven polyester fibre @ 160gm/sqm of approved make including minimum 10 cm side lap and 15 cm end lap, laid and pasted with blue flame torching applications and finally finishing with solar reflective bituminous aluminium paint @ 0.1.Kg/Sqm all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering complete all as specified and as directed.

M & L pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L for powder coated (Minimum thickness of powder coating 50micron) aluminium frame for windows, doors, ventilators and partition works with one or more rebates including joining cleats for fixing etc including taking down of existing frames complete all as specified and as directed.

S&F powder coated (Minimum thickness of powder coating 50micron) aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws etc including taking down of existing shutters complete all as specified and directed.

S&F Aluminum Alloy wire cloth, 0.45mm nominal dia of wire & average width of aperture 1.40mm and fixed with aluminium wire staples all as specified and as directed

M&L for 4.8 mm thick sheet glass, ordinary quality fixed to aluminum frame work and glazing with suitable size aluminum anodised beading exceeding 0.5 Sqm in each pane all as specified and directed.

M&L for point wiring 1100 Volts grade 1.5 Sqmm PVC insulated FRLS unsheathed cable with multistranded copper conductor conforming to IS:694:1990 with ISI marking existing concealed steel / PVC conduit pipe in wall/ceiling /floor/roof etc, except sunk pressed steel or cast iron terminal boxes with 3mm thick plastic laminated sheet top cover including 1.5 Sqmm PVC insulated FRLS unsheathed cable 1100 Volts multistranded copper conductor conforming to IS:694:1990 with ISI marking as continuous earth wire connected to common earth dolly for fan / light point complete all as specified and directed.

S & F integral sleek extruded polycarbonate batten for LED tube light with white acrylic cover suitable for upto 1 x 22 watts LED tube light complete all as specified and as directed. Make: Havells Cat Part No: REGALBATTEN8UPTO1X22W DSBSWH or equivalent in Bajaj / CG.

S & F LED tube rod 20Watt, 6500K, 1200mm long complete all as specified and as directed. Make:- Havells Cat Part No: CRYSTAL1213T8DSTL20WLED865 SGLASS or equivalent in Bajaj / CG.

S& F ceiling fan 1200mm sweep including electric connection from ceiling rose to connector with flexible cord twin core twisted copper of size 23/0.0076 and testing complete all as specified and as directed. Make:- CG Model No Briz AIr or equivalent in Bajaj / Khaitan.

S & F switch piano single pole one way flush type 5Amp capacity 230 volt all as specified and directed.

S & F decorative modular fan regulator, electronic five step type 230volts single phase of make Anchor (Roma) Cat part No 21496 or equivalent in Rider/ Leader/ Bajaj complete all as specified and as directed.

M/S KAMALKANTH NAIK

ABDUL RAHIM

LEKSHMI ENGINEERS

Ms V. S. NAYAK

Bidder Name

ABDUL RAHIM

LEKSHMI ENGINEERS

M/S KAMALKANTH NAIK

Ms V. S. NAYAK

SIRI SALES AND SERVICES