solar power pressurized irrigation infrastructure Solar Powered Pressurized Irrigation Infrastructure at Over Flowing Pond Solar,UPVC Pipe, Filteration Unit, Submersible Motor Pump-set,

Providing and fixing Tank Type (Make of Metal) Fertilizer and Chemical Injector System confirming to IS 14483 (Part 3) of 2018 for demonstration and guiding the farmers regarding fertilization and chemicalisation of system. (rates include ventury with manifold 1.0`=1300 and 60 liter fertilizer tank= 4400 ) rate approved by worthy Administrator

Horizontal directional drilling with micro tunnelling methods, for pipe laying under pacca rast/road crossing

Providing and lowering of HDPE floater manufactured with 225 mm dia PE pipe having PE-80 and PN-10 to float the submersible open well pump/motor

Galvanizes steel chain link both end twisted fence fabric having opening size 7.5x7.5 cm and 3.15 mm dia wire, 2.2 meter height of mesh, with 2.8 meter ht of MS Angle 50x50x5 mm supports fixing at spacing of 3 meter centre to centre, supports with MS Flat 35x5 mm. Fencing supported with MS Angle 35x35x5 at top and bottom. The M.S Angle supports shall be anchored in cement concrete (1:3:6) blocks 45x45x60 cm additional razor barbed wire fencing shall be provided at the top of mesh, fencing including gate

Providing and fixing 12 Watt LED Street Lighting of 75 watt solar panel, 12.8 volt 30 Ah Lithium Ferro Phosphate battery, 12 Watt White LED Luminaire and Pole of 5 Meter above ground level with dusk to dawn operation {first 4 hours full light Systemding, fixing and testing of Solar light including battery: min. 24 lux) , rest of the time at lower light (50% Min. 12 lux) level} and 3 days or minimum 36 operating hours autonomy or as per direction of engineer-in-charge

Providing, fixing,testing and commissioning of pressure gauge 2` dial with Glycerin filled to be fixed before and after filtration unit

Providing fixing of Header Assembly/Manifold 3` to connenct the filtration unit (loose)

providing and fixing of 3` plastic hydraulic control valve threaded (quick pressure relief)

providing and fixing of 1.5` plastic air cum vacuum relief valve.

providing , fixing , testing and commissioning of 2.5` Dial pressure Gauge.

providing and fixing of 2` continuous acting air cum vacuum relief vavle.

providing and fixing of 2` continuous acting air cum vacuum relief valve.

Complete operation and Maintenance and watch and ward of the project for one year including operation of pump, pipe line, accessories, electromechanical, solar plants complet in all respect of pump house, pipe line and accessories, electromechanical, solar plant etc complete in all respect for one year

Supply, installation, Testing and Commissioning of VFD Drive for Pumps (10 HP)

Supply, installation, Testing and Commissioning of VFD Drive for Pumps (15HP)

Providing, lowering, laying, aligning, fixing in position and jointing at all level/depths ISI marked HDPE pipe of PE-80 grade SDR-26 and PN-4 for irrigation as per IS 4984: 2016 (amended up to date) in tranches in complete including cost of HDPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment. (140mm HDPE pipe)

Supply Installation testing commissioning of Solar Photovoltaic Stand alone Plant conforming to MNRE specifications as amended, consisting of Mono Crystalline silicon solar cells, necessary protections, earthing, mounted on Aluminum/GI structure of suitable strength, anti-theft screws. Including lightning and surge voltage protection, fixing of Array junction box and Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required, built in metering system to monitor plant performance (Amp-meter, Vold-meter, Frequency meter, Energy meter, Watt-meter, and other instrument/equipment as required) Note:- PV modules used must qualify to the latest edition of IEC PV module qualification test or equivalent BIS standards Mono Crystalline Silicon Solar Cell Modules IEC 61215/IS14286. In addition, the modules must conform to IEC 61730 Part-1- requirements for construction and Part 2 – requirements for testing, for safety qualification or equivalent IS and be mounted on fixed Aluminum/GI structure of adequate strength and design as per IEC/IS specification. Including field-based electroluminescence (EL) study be performed after receiving the modules at site and after installation. Module mounting structure (MMS) including suitable foundation, design and drawing shall be duly vetted from government institute including third party inspection.

Supplying, erection, testing and commissioning of Solar AC Open-well Submersible Pump Set with three phase motor having casing of Alloy Steel for the required power capacity, discharge and Head including all PVC insulated polymer sheathed 3 core flat type cabling in conduit, required from solar plant to solar pump through control room. (10HP)

Supplying, erection, testing and commissioning of Solar AC Open-well Submersible Pump Set with three phase motor having casing of Alloy Steel for the required power capacity, discharge and Head including all PVC insulated polymer sheathed 3 core flat type cabling in conduit, required from solar plant to solar pump through control room. (15HP)

Providing, laying, aligning, and jointing at all level/ depths ISI marked HDPE pipe of PE 80 Grade SDR 17 PN 6 for irrigation as per IS 4984-2016 amended up to date in trenches in complete, including cost of HDPE Specials, labor, sectional hydraulic testing (including to cost of conveyance of water to site for testing ) and commissioning as per Technical Specifications and approved make as per direction of Engineer rates include cost of all specials like bends , tees required during laying of pipeline along required alignment. Dia. 140MM

NS Item - Construction of 6` x 6` regulation hut constructed with 9` thick brick masonary inner side covered with 1.25 mm thick class - 1 GI corrugated sheets (with 750 gm Zinc coating per sqm on its both sides) provided with proper door and windows as per approved design and drawing inner size 6` x 6` Av. Height 8 ` covered with precoated G.I Corrugated sheet ( NS Item)

Providing, lowering,laying,aligning, fixing in a position and jointing (with medium bodied cement solvent) at all level/depths of TypeB, Class-2(4kg/cm2) UPVC pipes for water supplies as per IS code 4985 : 2021 (amended up to date) in trenches in complete including cost of Specials, Labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment. UPVC Pipe 140 mm dia.

Complete operation and Maintenance and watch and ward of the project for one year including operation of pump, pipe line, accessories, electromechanical, solar plants complete in all respect of pump house, pipe line and accessories, electromechanical, solar plant etc. complete in all respect for one year

Complete operation and Maintenance and watch and ward of the project for one year including operation of pump, pipe line, accessories, electromechanical, solar plants complete in all respect of pump house, pipe line and accessories, electromechanical, solar plant etc. complete in all respect for one year

Complete operation and Maintenance and watch and ward of the project for one year including operation of pump, pipe line, accessories, electromechanical, solar plants complete in all respect of pump house, pipe line and accessories, electromechanical, solar plant etc. complete in all respect for one year

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Civil Work

Total for HSR Items for the work Solar power pressurized irrigation infrastructure at overflowing village ponds (3No) namely Shamshan Ghat pond, village Bani, Block Ladwa, Near School at village Dau majra, Block Shahabad, village Pond NEAR SHIV MANDIR at village KHERA, Block PIPLI, District Kurukshetra

Please Enable Macros to View BoQ information