Redevelopment work of company Garden Located Near Maidain Square In Varanasi City

Description

Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. (DSR Civil-2023, Item No. 2.32)

Dismantling of existing pavement (bituminous course) by mechanical means and disposal of dismantled material upto a lead of 1km, as per direction of engineer in charge. (DSR Civil-2023, Item No. 15.59)

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kind of soil. (DSR Civil-2023, Item No. 2.8.1)

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transportincluding loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. ( DSR Civil-2023, Item No. 1.1.18)

1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources). ( DSR Civil-2023, Item No. 4.1.5)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand). (DSR Civil-2023, Item No. 6.1.1)

12 mm cement plaster of mix: 1:4 (1 cement: 4 coarse sand) (DSR Civil-2023, Item No. 13.4.1)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse and(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR Civil-2023, Item No. 5.3)

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete. (DSR Civil-2023, Item No. 5.9.5)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. (DSR Civil-2023, Item No.5.22.6)

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (DSR-2023, Item No. 10.25.2)

Providing and fixing dry cladding upto 10 metre height with 30 mm thick gang saw cut stone with machine cut edges of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately). Red sand stone work for wall lining etc. 30 mm thick saw cut stone. ( DSR Civil-2023, Item No. 8.20.1)

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). (DSR Civil-2023, Item No. 16.69)

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) (DSR-2023, Item No. 13.46.1)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. (DSR-2023, Item No.13.62.1)

Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wallsurface to prepare the surface even and smooth complete. (DSR-2023, Item No.13.80)

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. (DSR-2023, Item No.16.91.2)

Supply and fixing of RCC Bollard 900x150mm etc. all complete. (MR)

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) (DSR-2023, Item No. 10.28)

40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match theshade of stone and pointing with same mortar. . Red sand stone. (DSR 2023, Item No. 11.30.1)

Supply & fixing of 200X200 mm TERRACOTA JAALI for screening as per direction of EIC (Structural fram will be paid extra) (MR)

Supply & fixing of 0.9mx0.6m (approx) signage of the park installed at ht of 0.75m above ground. Retro reflective printed board on ACP sheet mounted on SS frame. (MR)

INAUGRATION STONE GRANITE SIZE WITHING WRITUP 750X600 MM ALONG WITH BRICK PEDESTAL (AR)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand). (DSR Civil-2023, Item No. 6.4.1)

Supply & fixing of LT cable armored served sheathed cables 1100 V grade depth of 750mm below ground or cable shall be run on surface fixed on MS clamp. 25 Sqmm × 3.5 core. (SOR Elect. 2018, SI No. 501J)

Supply & fixing of LT cable armored served sheathed cables 1100 V grade depth of 750mm below ground or cable shall be run on surface fixed on MS clamp. 10 Sqmm × 4 core. (SOR Elect. 2018, SI No. 501H)

Supply and burring of Safe Earthing Electrode T-39 (Hot-Dip Galvanized), Length up to 3000mm, outer pipe 76mm inner Dia 38mm terminal Dia 12 mm ,outer GI pipe of 16 SWG and inner GI pipe of 12 SWG with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board, cost of 25 X 3 GI. Strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. (SOR Elect. 2018, SI No. 725D)

Supply and fixing following capacity of automatic street light cubicle control panel painted with anticorrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. 40 A TPN. (SOR Elect. 2018, SI No. 807 (F) ii)

S/F of 4mtr, Long decorative pole outdoor type complete with decorative pole & 70 watt LED Sport light with water prouf housing Die cost complete (MR)

Please Enable Macros to View BoQ information