CIVIL WORK

Amount

Civil work of washroom

Dismantling Concrete or Precast Concrete (a) Lime Concrete, cement concrete 1:6:12 or leaner Ref-8.6(a)

Dismantlement of Wall tiles at any floor of the building laid in cement mortar including scrapping of cement plaster and disposal of malba at a suitable place within the distance of 100 meters of the complex complete in all respect. (L/R)

Dismantling Brick Work tile masonry (b) In cement (L/R) (Ref 8.5(b)

Scrapping (Ref-8.31(a) (a) White Wash & Colour Wash (L/R)

Removing Doors & Windows (Steel or Wood) with chowkhats by making recesses in walls when the wall is not to be dismantled (L/R) (a) Doors of Area 3 sqm or below (Ref-8.26 (a)

Removing Doors & Windows (Steel or Wood) with chowkhats by making recesses in walls when the wall is not to be dismantled (L/R) (b) Windows of Area 3 sqm or below (Ref-8.26 (b)

Colour Washing (Two Coats) (Ref-16.5)

Providing and fixing aluminium work for doors,windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is:733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In-Charge. (Glazing and paneling to be paid for separately) : (T/R) (a) For fixed portion & Chaukhats (T/R) (R-17.45(a)

(b) For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required (T/R) (Ref-17.45b)

Providing and fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : (T/R) (Ref-17.49-(b) (b) 250mm X 16mm

Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt) (T/R) (17.23(ii) (ii) For shutter area above 0.5 sqm

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc.complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides. (T/R) (Ref.-17.46(ii)

Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete (T/R) (Ref.17.43-(b) (b) I.S.I Designation No. II (size of door 701mm to 850 mm)

Removing,refixing & cutting of existing door complete in all respect A.O.R attached as per Annexure- c (N/S Item)

Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete white cement slurry in joints including corners angles and beading. Ref-14.72)

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS :15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 200 x 300 mm, 100x200mm, 200x200mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (T/R) (Ref-14.125)

Sanitary work

Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. T/R (Ref-30.4)

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. T/R (Ref30.32 (V) (v). Size 560mm x 430mm x 820 mm

Providing and fixing in position 15mm i/d bib cock of approved make (to the approval of Engineer-in-charge) complete in all respect T/R(Ref-30.65 A (ii) (ii) C.P. brass Bib cock foam flow without flange

Providing and fixing in position stop cock / angle valve of approved make (to the approval of Engineer-in-charge) complete in all respect T/R (Ref-30.66 (c) (c.) C.P Brass 15mm angle valve without flange

Providing and fixing in position Jet Spray with 2'-6" long PVC Pipe. T/R (Ref-30.8 (a) (b) With CP Brass Nut

Providing and fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50m, CP Brass screw & washers & S/S studs on the top complete in all respect. (asrequired by the Engineer-in-charge) T/R (Ref-30.61 (a) (a). Size 600mm x 450mm

Providing and fixing Vitreous White chinaware partition T/R (Ref-30.21 (B) (ii) (ii) Large partition size 75 x 16.5 x 36.5 cm

Providing & fixing in position C.P Brass flange of approved make (to the approval of Engineer-in-Charge) under various fixtures complete in all respect T/R (ref-30.64(a)

Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect. T/R (Ref-30.43(i) i) Vitreous chinaware standard white pedestal for wash hand basin.

Providing and fixing 15mm C.P brass laboratory cock swan neck of approved make(to the approval of Engineer-in-Charge) complete in all respect. T/R (Ref- 30.68 (a) (a) Laboratory cock swan neck One way

Providing and fixing H.C.I Floor traps conforming to I.S.I Specification (IS:1729) of approved make(to the approval of Engineer-in-Charge) of the self cleaning design with C.P brass hinged grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required utp floor level complete in all respect including cutting and making good the walls and floors, etc minimum depth of water should be 150mm with a minumum seal 50mm T/R (Ref30.79(a) (a) With 75mm i/d outlet deep seal

Providing and fixing in position vitreous Chinaware white large flat back or angular lipped front urinal 610 mm high of approved make (to the approval of the Engineer-In-Charge) (610mm X 410mm X 380mm) consisting of C.P waste 32 mm dia and C.P brass spreader, complete T/R (Ref-30.16)

Dismantling, disjointing.removal of G.I Pipes lines, special,valves and fitting in complete respect (b) 20mm internal diameter pipe line L/R (Ref-28.63(b)

Providing, Stringing out PVC. Pipes ISI Mark as per ISI - 4985(premium make such as supreme /Finolex/Prince) casting along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing including cost of specials complete as per specifications. T/R a. 75 mm O/D (10 Kg/cm2) (Ref-28.13 (ii)

Providing, Stringing out PVC. Pipes ISI Mark as per ISI - 4985(premium make such as Supreme/ Finolex/Prince) casting along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing including cost of specials complete as per specifications. T/R b. 110 mm O/D (2.50Kg/cm2) (Ref-28.13(iv)

Extra for making connections of all sizes newly laid sewers within benching of fully charged sewers including pluging of sewer, dewatering & desilting of manholes etc. A) with existing sewer of 300 mm id and below (Ref-29.73(a)

Providing and placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make(to the approval of Engineer-In Charge) with cover with suitable locking arrangement and making necessary holes for inlet, outletand over flow pipes but without fittings and base support for tank T/R (Ref-30.97 (A-i)l i) Triple Layer Tanks

Providing and fixing in position G.I Tank Nipple of approved make (to the approval of Engineer-In Charge) in PVC Water Storage Tank complete in all respect T/R (Ref-30.98(b) G.I Tank Nipple 20mm I/D

Providing and fixing in position Automatic Brass Ball cock in tanks. Brass Ball Cock with Rod and Plastic Ball - 20mm I/D. T/R (Ref-30.96(B)-ii

Providing Laying,jointing,fixing and testing ISI Marked G.I Pipe (as per IS 1239) B-Class Premium make such as (Jindal hisar) including cost of specials (such as tees, bends, sockets, elbows etc),painting with anti corrosive bitumastic paint, testing,cutting, threading inside building complete 20mm I/d T/R (Ref-28.35(b)

Providing, laying , jointing, fixing and testing ISI marked GI Pipe (as per IS 1239) B-Class premium make such as Jindal Hissar including cost of specials (such as tees, bends, sockets, elbows etc.) painting with anti-corrosive bitumastic paint, testing,cutting, threading inside building complete. T/R (Ref-28.35(a) (a) 15mm dia internal

Providing fixing and jointing G.I Union Couplings ( of approved make (to the approval of Engineer-In Charge) as per IS 1879 in G.I Pipe Lines complete in all respect T/R (Ref-28.40 (b) 20mm I/d G.I Union

Dismantling Sanitary Fixtures such as European / Indian / Orissa W.C, PVC / Chinaware Cistern Wash Hand basin, Urinal Pots, Sinks and CP fittings and disposal of dismantled material with in a distance of 100 Mtrs complete in all respect as required by Engineer-in-Charge (L/R) (Ref-30.88 (a) a. European / Indian / Orissa W.C

Dismantling Sanitary Fixtures such as European / Indian / Orissa W.C, PVC / Chinaware Cistern Wash Hand basin, Urinal Pots, Sinks and CP fittings and disposal of dismantled material with in a distance of 100 Mtrs complete in all respect as required by Engineer-in-Charge (L/R) (Ref-30.88 (b) b. PVC / Chinaware Cistern

Dismantling Sanitary Fixtures such as European / Indian / Orissa W.C, PVC / Chinaware Cistern Wash Hand basin, Urinal Pots, Sinks and CP fittings and disposal of dismantled material with in a distance of 100 Mtrs complete in all respect as required by Engineer-in-Charge (L/R) (Ref-30.88 (c) c. Wash Hand basin, Urinal Pots

Dismantling Sanitary Fixtures such as European / Indian / Orissa W.C, PVC / Chinaware Cistern Wash Hand basin, Urinal Pots, Sinks and CP fittings and disposal of dismantled material with in a distance of 100 Mtrs complete in all respect as required by Engineer-in-Charge (L/R) (Ref-30.88 (e) d. CP Bib Cock/Angle Cock/Stop Cock/Shower/Bottle Trap

Providing,fixing and jointing ISI Marked Gun-Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels on G.I Pipe Lines laid in the ground or inside buildings including all carriage complete. 20mm i/d Gun Metal Peet Valve Heavy Pattern T/R Ref-28.43(b)

Providing and fixing PVC Cistern 10 Ltr. Capacity ISI marked IS 7231:1994( size 32.5x47.6x15.5 cm) of approved make(to the approval of the Engineer-in-charge) including PVC fittings complete. T/R (Ref-30.6(a)

Providing and fixing in position paper holders of approved make (to the approval of Engineer-in-charge) fixed in to wall with C.P brass screws complete in all respect T/R (Ref-30.57(a) (a) C.P brass toilet paper holder

Providing and fixing in position towel rails /ring of approved make (to the approval of Engineer-in-charge) fixed in with rawl plugs embedded in walls with brass screws, complete in all respects T/R (Ref-30.58 (b) (a) C.P brass towel Ring

Providing and fixing in position CP Arcylic Shelf with CP Brackets and guard rails of approved make (to the approval of Engineer-in-charge) fixed in with rawl plugs and C.P brass screws complete in all respect (Ref-30.59 (a) (a) CP Brass Acrylic Shelf Size 560mm X 130mm

Providing and fixing in position CP Brass Soap dish of approved make (to the approval of Engineer-in-charge) fixed into wall with rawl plugs and C.P brass screws complete in all respect T/R (Ref-30.60)

Providing and fixing in position C.P Brass extension piece 25mm long to 50mm long of aproved make (to the approval of Engineer-in-charge) with various fixtures complete in all respect. T/R (Ref-30.64 (b)

Electrical work

RECESSED CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FRLS cable (ISI marked), 1100volts grade to be laid in heavy gauge welded conduit pipe 20 mm/25 mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules, for having electronic fan regulators (two module), bell push, electronic buzzer, 3pin 6Amp., 3pin 16/20 Amp. Sockets and 6 Amp./16/20Amp. Swithces etc., and covered with Frame Plate etc., & including the cost of required number of modular switches/sockets, step type electronic fan regulator 100 watts, PVC connector (For Fan Box and Electronic Buzzer), PVC Bush, Steel Hooks, Circular Inspection Box (Recessed Type and Deep Type) conduit pipe & copper wire and other petty material etc. including the cost of cutting and filling up of chases. T/R (ii) Wiring light point (Ref-34.02 b(ii)

RECESSED CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FRLS cable (ISI marked), 1100volts grade to be laid in heavy gauge welded conduit pipe 20 mm/25 mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules, for having electronic fan regulators (two module), bell push, electronic buzzer, 3pin 6Amp., 3pin 16/20 Amp. Sockets and 6 Amp./16/20Amp. Swithces etc., and covered with Frame Plate etc., & including the cost of required number of modular switches/sockets, step type electronic fan regulator 100 watts, PVC connector (For Fan Box and Electronic Buzzer), PVC Bush, Steel Hooks, Circular Inspection Box (Recessed Type and Deep Type) conduit pipe & copper wire and other petty material etc. including the cost of cutting and filling up of chases T/R (i) Wiring 3 pin 6 Amp. wall socket (Shuttered) point in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade complete with bonding to existing earth with PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1 sq. mm, 1100volts grade. iv) Wiring 6Amp. wall socket point. (Ref-34.01 b (iv)

Rajinder Kumar

Mukul Kansal