SPL REPAIR TO CERTAIN INTERNAL RDS IN MD ACCN GFA, OGFA, THELA GROUND, USMAN RD UNDER GE (WEST) LUCKNOW.

M&L for preparing of black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with mechanical compressor and gunny bags to remove all loose dirt etc complete as all specified and directed.

M&L for Repair to pot holes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc, making good by applying tack coat @ 5 kg per 10 sq m, putting in premixed bituminous macadam well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premix macadam binder and chippings) depth of potholes n exc 30 mm.complete as all specified and directed.

M&L for applying evenly a priming/ tack coat with bituminous primer using paving bitumen of any penetration at 5.0 kg per 10 sqm applied with mechanical bouzer complete as all specified and directed.

M&L for 30 mm thick (consolidated thickness) Bituminous premix semi dense asphaltic concrete with 5.50% binder content (Bituminous grade VG-30) by weight of total mix, laid by mechanical paver rolled and compacted to required camber, gradient and for uniform smooth surface by using power roller 8 to 12 tonne capacity complete all as specified and directed.

M&L for Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75 mm or less) with @ 4% binder content (Bituminous grade VG-30) by weight of total mix, laid by mechanical paver, rolled and compacted with 8 to 12 tonne power roller complete all as directed and directed.

M&L for providing and applying 2.5 mm thick road marking strips with 250 gram Glass Beads (retroreflective) of specified shade/colour using hot thermoplastic material by fully/semi-automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoes heater; driven by experienced operator on road surface including cost of material, Labour, T&P; Cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction and accordance with applicable specifications as per MoRTH specification having Titanium- 10%, Resin- 18%, Intermix Glass Beads - 30% & filler (Calcite) - 42% in proportion

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15cm thick (below or above ground level) complete all as specified and directed.

M & L cement concrete 1:2:4 type B-0 using 12.5 mm graded stone agg as in coping plinth course and the like incl weathering slightly rounded or chamfered angle and throating and necessary formwork complete all as specified and directed.

M & L for hardcore of gauge not exceeding 63 mm of broken granite stone, depo. spread and leveled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggrtegate) as in sub base etc complete all as specified and directed.