Repair/renovation of Building No. 03 (Store Issue, CTS Godown portion, etc) and Cash Office at OFC, Kanpur

Amount

Demolition of PCC of any description and in any position not otherwise specifically provided.(Unreinforced)

Taking down old chowkats with shutters (without taking off shutters from the frames) exc 1.5 sqm n exc 4 sq.mtr and deposited to store.

Dismantling of brickwork or stone/ boulder masonry,built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles.

Rough excavation of earth n. exc. 1.50 mtr depth getting out in hard/dense soil.

M&L cement concrete M-15. 1:2:4 20.0 mm graded aggregate in foundation filling and mass concrete and finished surface even and smooth.

M&L for cement concrete in foundations,filling and mass concrete. (Type E2 1:5:10 40.0mm graded aggregate.)

M&L for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like (Type B1 1:2:4, 20 mm graded aggregate)

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6.0m mean radius built in cement mortar 1:4 at any height with proper scaffolding and safety.

M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.

M&L for vitrified ceramic tiles (light colour) 8-9 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with skirting. (Make Johnson, Somany, kajaria) (Colour as decided by EIC)

M&L for non-skid colour ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.(Make: Kajaria, Johnson, Somany)

M&L for glazed ceremic colour tiles in vertical surface 350x250x7mm/450X300X 7mm and over, thick set and jointed in neat cement slurry and pointed in white or colour cement to match. (Make: Kajaria, Johnson, Somany)

M&L for brushing neat cement slurry with 3.0 kg/sq.m & laying 15.0 mm average thick screed bed 1:4 ratio.

Complete removal of existing treatment before plastering.

M&L for spraying cement slurry 3.0 kg per sqm and rendering 12mm thick cement plaster 1:6 on fair faces of brick work or concrete on wall surfaces making even & smooth without using extra cement.

S&F of M.S. (Fe -290 Gde E -165) framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified.

S&F for 30mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides. (Make: Greenply, Century, Kitply)

M&L of 0.9mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions.(Make: Century, Greenlam, Merino, Royale Touche)

Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer.

Supply, and fixing 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and jointed at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickenss. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm ( + 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having overall thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by insering horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as specified by the manufacturer.

S&F for anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F of anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S&F of anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.

S&F of door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed. (Aluminum dia cast body) (Make: Universal , Sandhu, Everest)

S&F 4.8 mm thick Plain glass, pin head type and glazing with oil putty in squares n.exc 0.5 sqm in each pane.

M&F of 12mm thick particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work.

S&F of 250mm brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed.

S&F of 150 mm of Aluminium handles,cast type, polished bright.

S&F of 100mm butt hinges, cast brass,with mild steel hinge pin, bright polished and fixed, type B-11.

S&F of 150mm aluminium anodised, barrel tower bolts of extruded section and fixed.

M&L for 110mm dia PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls. (Make: Dplast, Fenolex, Ashirwad)

S&F Vitreous China wash down water closet pan (pedestal pattern), white colour (EWC) with Plastic water closet seat cover with recessed bottom and Mild steel chromium plated hinging device,complete.( Make:Cera, Parryware, Hindware)

S&F Vitreous china white color Squatting Pan Órrissa 'Pattern of size 580x440 mm white with intregal footrest (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor. ( Make:Cera, Parryware, Hindware)

S&F of PVC (SWR) 'P' trap of Size 110 mm.

S&F of PVC valveless, syphonic action type, flushing cistern of 10 liter capacity,low level, white, with inlet,ball valve, float and handle including brackets and flushing pipe (fixing only), fixed in repairs.(Make: Jaquar, Johnson, Parryware)

S&F of vitreous china urinal, half stall type, excluding waste coupling,flush pipe and waste pipe complete.(Make: Jaquar, Johnson, Parryware)

S&F of Vitreous China wash basin, white, flat back, size 630x450mm with pedestal excluding taps, waste, chain and plug but including cutting for and pinning in ends of brackets or erecting stand. (Make: Jaquar, Johnson, Parryware)

S&F of 15mm fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.(Make: Jaquar, Johnson, Parryware)

M&L of Supplying and laying of 20.mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.( Make: Supreme, Finolex, Ashirvad)

M&L for Supplying and fixing of CPVC brass TEE suitable for CPVC pipe outer diameter 20.0 mm .

M&L for Supplying and fixing of CPVC female brass threaded adapter size 20 mm.

M&L for Supplying and fixing of CPVC brass Elbow suitable for CPVC pipe outer diameter (3/4" x1/2").

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. (Make - Jaquar, Johnson, Parryware)

S&F chrome plated 15mm Bib taps, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. (Make: Cera, Prayag, Parryware, Johnson)

Hoisting & fixing of rotational moulded polythylene water storage tank, 3 layer ,capacity 1000 ltr (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. (Make: Sintex, Polycon, Dplast)

S&F of 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm - 690 gms)

S&F of PVC connections 15mm size with PTMT nuts of length 600mm. Make: Cera, Prayag, Parryware.

M&L for 32 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed.

M&L of PVC (SWR) gully trap 125/110 mm with gratting setting and jointing with solvent cement. (Make: Supreme, Finolex, Ashirvad, Prince, Sintex, Kisan)

M&L for Cutting into existing manholes for connecting 100mm internal dia pipe, new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required

M&L of cutting chases (brick wall), pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth.

M&L for taking down old tarfelt and making the area clean with wire brush and washing the surface and preparing the surface for water proof treatment.

M&L of taking down cement plaster/screed on brick or stone walls, concrete etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L for spreading of neat cement slurry @3.0Kg per Sqm over the rough surface before screed bedding.

M&L for 20.0 mm thick screed bed or plaster with 1:4 cement mortar on roof surface to make slope as well as smooth surface for receiving APP Memberane.

Supply of Liquid water proofing compound @200ml per bag of cement using with item no. 58. Make: Pidilite, Asian, Mendo Semi Liquid.

Supply of bitumen primer oil based for use in waterproofing and damp-proofing treatments make: Salitax primer STP, Dr.Fixit-Bitufix, IWL Chennai & Berger Bitumin Primer.

Labour charges only for applying of Bitumin primer @0.4 Lit/Sqm by using their own applying equipment.

M&L for laying of APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified of any one. Make: IWL Chennai Ltd., STP Ltd., Asian or Pidilite Ltd ,properly sealed with torch application to newly primed surface.

M&L for making bitumastic gola all around the perimeter of parapet wall to make leak proof with 80/25 bitumen and coarse sand mixture 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces.

M&L apply 3.0mm thick water proofing wall care putty. ( Make: JK, Berger, Birla)

M&L for prepaeration of old painted surface & apply one coat primer and apply two coats of plastic emulsion (Interior) on wall surfaces of any description over 10cm girth or width, not otherwise described. (1st quality) (Make- Asian Paints, Nerolac, Berger)

M&L for prepaeration of new painted surface & apply one coat primer and two coats of premium acrylic exterior water proof paint on wall. (Make: Nerolac, Asian Paints, Berger Paints). All of First Quality (Shade will be decided by EIC only)

M&Lof preparation of new or previously un- treated surface painted surfaces & appy one coat pink primer and apply two coat of synthetic enamel paint on wood surface of any description, not otherwise described, over 10cm width or girth. (Make: Nerolac, Asian Paints, Berger Paints). All of First Quality (Shade will be decided by EIC only)

Providing and fixing of pvc laminated gypsum false ceiling size 595 x 595 x 08mm with hot Dipped Galvanized exposed grid with 24mm wide T-section exposed (galvanising 90gram/sqm &warranty for grid and tiles warranty) flanges which shall be powder coated white. The framework shall consist of main runner made from 0.33mm thick GI sheet and of size 24mm x 32mm x 3000mm and spaced at 1200mm centres securely fixed to the structural soffit by approved hangars at 1200 mm maximum centres. Hangars (GI wire of 4.0mm dia) to be fixed by approved rawl plug, level adjustors and screws etc. The last hangar at the end of the main runner should not be greater than 450mm from the adjoining wall. Flush fitting of 1200 mm long cross tee (with double stitching) to be interlocked between main runners at 600mm centres to form 1200mm x 600 mm modules. Cross tees longer than 600mm to be supported independently. 600mm x 600mm modules to be formed by fitting 600mm long cross tee centrally between the 1200mm cross tee. Perimeter wall angle shall be of 0.45 thick GS steel and of size 19mm x 19mm and 3000 mm long of white colour secured to walls @450mm maximum centres.The first & last runner should not greater than 450mm from adjacent wall. (Make Saint Gobain, Armstrong)

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceilingroses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custodyor for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse)

M & L one 3 Pin socket outlet, 5Amp on the same board with other switches, with copper conductor cable size 2.5 Sq. mm. in PVC conduit.

M & L One light point or one fan point controlled by one switch with cables 1.5 sq.mm with copper conductor cables size in PVC conduit.

M & L PVC rectangular box for mounting switch sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 x 100 x 50 mm deep.

M & L PVC rectangular box for mounting switch sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 175 x 100 x 50 mm deep.

M & L PVC rectangular box for mounting switch sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 250 x 200 x 50 mm deep.

S & F switch piano flush type single pole one way 6 amp.

S & F switch piano flush type single pole one way 16 amp.

S & F socket outlet 5 Amps, 5 Pin flush type.

S & F socket outlet 2 in 1, 5 /15 Amps 6-pin flush type.

M & L sheet metal enclosures with socket plug top and MCBs single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 20 Amp, 240 Volts.

S & F wiring for circuit/ submain wiring in suitable PVC conduit along with earth wire with 2 X 1.5 sq. mm. + 1 X 1.5 sq. mm size of FR PVC insulated copper conductor, single core cable in surface / recessed.

S & F wiring for circuit/ submain wiring in suitable PVC casing caping along with earth wire with 2 X 2.5 sq. mm. + 1 X 2.5 sq. mm size of FR PVC insulated copper conductor, single core cable in surface / recessed.

S & F wiring for circuit/ submain wiring in suitable PVC casing caping along with earth wire with 2 X 4.0 sq. mm. + 1 X 4.0 sq. mm size of FR PVC insulated copper conductor, single core cable in surface / recessed.

S & F wiring for circuit/ submain wiring in suitable PVC conduit along with earth wire with 2 X 6.0 sq. mm. + 1 X 6.0 sq. mm size of FR PVC insulated copper conductor, single core cable in surface / recessed.

Fixing only LED tube light fitting (16-22 watt) / LED luminaire size (600 X 600) MM / LED light fitting mirror, size 2 feet / Recessed type round shape LED lamp suitable for roof ceiling/ LED light fitting bulkhead luminaires, suitable for 220 volt , AC with driver, holder including LED light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete .

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

M & L sheet metal enclosure for DB, double door with 200 Amp rated busbar when MCBs to be used for single pole & neutral 12 way, 240 volts, AC.

M&L for Earthing complete with Copper earth plate electrode 60 × 60cm. × 3.15 mm thick, buried directly in ground earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less 'than 1.5 metres below normal ground level, connected to Copper earth strip size 20 x 3 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion.

Material & Labour for providing 20x3 mm copper strip for copper plate earthing.

Material & Labour for providing Earth continuity conductor 4 mm dia for loop earthing of cables, conduits, DB etc. complete.

M & L for laying or fixing or passing through pipe including termination on both sides for XLPE or PVC insulated, armoured heavy duty electric cable with aluminium conductor, 1100 Volt grade size 120 sq.mm. & 3 & 1/2 core. Make-FINOLEX, POLYCAB, GRANDLAY ,GLOSTER.

Supply and fixing 6 amps to 32 amps rating, 240 volt, 10 KA,"C" Curve miniature circuit breaker single pole .

Supply and fixing 40 to 63 amps rating ,415 volt , 10 KA ,"C" Curve miniature circuit breaker single pole and neutral .

Supply and fixing 40 to 100 amps rating , 415 volt , 10 KA ,"C" Curve miniature circuit breaker tripple pole and neutral .

S & F of Triple pole and neutral Powder coated Sheet Metal 8 Way 230 volt MCB Distribution Board double door for single pole Outgoing & facility for using SP MCB as incomer, complete with fixing arrangements. Make: Legrand, INDOASIAN, Schnider.

Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supply and fix exhaust fan, steel body AC single Phase, 230V of size 300m sweep with, blades, and frame and louvers

Material & Labour for GI Pipe 25 MM dia medium grade duty for watering in earthing system as required and directed by EIC. (Make-JINDAL, BHUSAN, TATA)

Material & Labour for GI Pipe 40 MM dia MEDIUM GRADE grade duty for protection of cable as required and directed by EIC.(Make-JINDAL, BHUSAN, TATA)

Material & Labour for GI Pipe 80 MM dia MEDIUM GRADE grade duty for protection of cable as required and directed by EIC.(Make-JINDAL,BHUSAN,TATA)

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth brick wall.

Supply and fixing of Bands, strips, support, or stays, frames including nut & bolts for fixing MCB DB /Fuse DB, Hooks for hanging light fittngs or similar articles conforming to FE-290GDE E -165.

Material & Labour excavating in trenches, not exceeding 1.5 mtr. Wide and not exceeding 1.5 mtr. in depth ; for cable trench and getting out in soft soil as required and directed by EIC.

Material & Labour for necessary excavation work in hard soil for each additional 1.5m or part thereof in depth beyond the first 1.5 mtr and getting out in hard soil soil as directed by EIC.

Material & Labour for returning, filling in, including, spreading, levelling, watering and well ramming in layers not exc 25 cm. in soft soil.

Material & Labour for demolition concrete of any description and in any position not otherwise specifically provided for cement concrete (unreinforced)

Material & labour for cement concrete type B2 1:2:4 (40mm graded aggregate)

M & L for PVC or XLPE insulated, armoured heavy duty electrical cable with Copper conductor, 1100 Volt grade size 16 sq.mm 4 core including termination on both sides. (Make- FINOLEX, POLYCAB, HAVELLS, V- GUARD, KEI, GRANDLAY )

M & L for PVC or XLPE insulated, armoured heavy duty electrical cable with Copper conductor, 1100 Volt grade size 10 sq.mm 4 core including termination on both sides. (Make- FINOLEX, POLYCAB, HAVELLS, V- GUARD, KEI, GRANDLAY )

Wall Mounted Bracket Fan, copper wound 400mm, sweep, adjustable hinj, oscilating and bolt in 3 speed regulator . MAKE: USHA, BAJAJ, KHAITAN, HAVELLS, POLAR.

Supply and fixing 6 way surface/recess mounting, Double door, vertical type, 415 volt, TPN MCB distribution board, of sheet steel, dust protected, duly powder painted ,inclusive of 160 amp. tinned copper bus bar, common neutral link, earth bar ,din bar for mounting MCBs, including supply of 125 amp STP 36 KA MCCB 4 pole as incommer, interconnection between incommer MCCB and busbars with MCBs as required. Make: Legrand, Hager, Siemens INDOASIAN.

Supply and fixing On-load Changeover switch 4 POLE , 125 amp with enclosure box. ( Make:Legrand, Hager, Siemens, INDOASIAN)

Supply and fixing MCCB 3 POLE ,415VOLT,Adjustable type , thermal magnetic release 200 amp with breaking capacity 25 KA with enclosure box. ( Make:Legrand, Hager, Siemens, INDOASIAN)

Supplying and installing following size of perforated pre-painted M.S. cable trays of size 300 mm width X 50 mm depth X 1.6 mm thickness with perforation not more than 17.5%, in convenient sections, joined with connectors, supported horizontally with suitable M.S. angle including bolts & nuts, painting etc as required with running earth wire.

Material & Labour for Cast iron top cover for earthing pits Size minimum 12 inches x 12 inches.

Dismantaling / removing of old Panels /switching system / Distribution boxes and making good on the surface .

M/L boring under the road in soft dense soil to pass the underground cable for electrical connection with bore dia. not exc. 100mm.

Talson Builders (BID ID -890912)

B.K.Associates (BID ID -887513)