NIQ-03-(EL) (Sl-03) of 2024-2025

Amount

Supply, installation, testing and commissioning of 10 passengers MRL type lift with following features; Capacity: 10 passengers (680 kg) Travel height: G+3 , No. of stops and opening: 4 nos. Control Panel: Microprocessor panel.Operation: Automatic . Power supply required : 415 V 3-Ph 50 Hz AC. Machine: 5 HP gearless. Auxiliary : 220 V 1-Ph.Cabin finish: Stainless Steel with 304 grade . Cabin door: Automatic centre opening door with SS mirror finish.Landing door: Automatic centre opening door with SS mirror finish. Car floor: PVC flooring. False ceiling: SS made standard design with LED lights and blower fittings. COP/LOP: Wall mount seven display.Main hoist rope : Usha Martin.Auto rescue device or UPS: UPS.Signal: Emergency alarm bell, UP/DN. Induction at all landings, Luminious call indicator in car for signaling the attendant, Digital car in position indicator at all landings. Break: Heavy duty electromagnetic.Make (As per EIC)

Supplying and fixing double door 4 way TPN MCB Distribution board with IP-42/43 protection with 1 No. 100 A FP MCB as incomer and 1 no. 63 A 4P MCB , 1 no. 40 A 4P MCB and 8 nos. 6-32 A SP MCB as outgoing complete , concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment with following MCBs . (Make as per EIC)

S & F 2+12 way double door IP-43 SPN MCB distribution board with 1 No. 40 A DP MCB as incomer and 10 no 6-32 A SP MCB as outgoing complete with Din Rail, Earth, Neutral & Phase Bars etc. to be partially recessed in wall with earthing attachment.(Make as per EIC)

Supplying and fixing 25 mm PVC Rigid Conduit 'FR' on wall, ceiling with saddles and other accessories as required and mending good damages to building works

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required 4x80/0.4 (10 sqmm) + 2x84/0.3 (6 sqmm) as ECC

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required2×10 sq.mm. + 1×6 sq.mm.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Make-KEI/Havells/RR Cables) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Make-Legrand/Havells/L&T) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish a) Avg run 8 mtr.

Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Make-Legrand/Havells/L&T) with 6A Modular type switch, without plug top on 4 Module GI/PVC Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply of LED Bulkhead that fits in vartiety of applications and serves as simple energy efficient alternative to CFL/incandescent bulkhead luminaires. (Havells/Crompton/HPL)

Fixing only bulk head /ceiling fitting on wall /ceiling by screws etc.

Earthing with Copper plate (610x610x3mm size) having weight of 9.84 Kg and 1 No. 25x5mm Copper strip (3.20 mt long) & 1 no. 6 sqmm PVC insulated stranded Copper wire (4 Mt long) incl. S & F 15 mm dia GI pipe (ISI-Medium) protection (4 mt. long) to be fillied with bitumen, partly under the ground level & partly above ground level to an average depth of 3.65 Mts. below the ground level and restoring the surface duly rammed incl. providing 3.0 mt long, 25 mm dia GI pipe (ISI-Medium) for periodic treatment, incl. providing masonery enclosure on the top of the earth electrode of overall size 86.36x86.36x46cm deep (below Ground level) complete with cemented brick work (1:6) of 25 cm width, duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56x35.56cm with locking arrangement, GI reducer and treatment of soil by using salt & charcoal or coke for plate electrode

Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. a) In ground floor including roof. Basement floor (Lift room)

Ground floor Lift room

1st floor( Lift room)

2nd floor (Lift room)

Labour for Chipping of concrete surface before taking up Plastering work.

Page- 164, Item -2 P.W.(Bild)Schedule -Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (ii) With 1:4 cement mortar b) 15 mm thick plaster Basement floor

Ground floor

1st floor

2nd floor

125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (ii ) River

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.(a) For works in foundation and upto roof of ground floor/upto 4 m (i) Tor steel/Mild Steel I. SAIL/ TATA/RINL.

M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. i) For roof truss works a) Span up to 12 Mtr

Supplying, fitting & fixing granite tiles 10mm to 12mm. thick in columns, wall, facia etc. with 15 thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all complete as per direction of the Engineer-in-charge including cost of all materials, labours, scaffolding, staging ,curing and roughening of concrete surface complete. [Using cement slurry at back side of tiles@ 4.4 kg/sq.m & white cement slurry for joint filling @ 1.8 kg/sq.m] Area of each slab upto 0.2 Sq.m

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor)(a) one Coats (i) Water based interior grade Acrylic Primer

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) i) Luxury Quality.

White washing including cleaning and smoothening surface thoroughly. All floors :b) Two coats (to be done on specific instruction). Basement floor, lift well

MAA MANASA ENGINEERS (BID ID -5615285)

Dutta Enterprise (BID ID -5619556)