GE 861 EWS-30/2024-25

Amount

Dismantling of CGI/PGI Sheet fixed with screws as in roof covering complete all as specified and directed.

M&L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ Cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

M&L for Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/Cladding to wall, Ridge and eaves board, fixed with self tapping screws complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store/credit to contractor and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (Unreinforced) in ground floor and paving n exc 15 cm thick below or above ground level complete all as specified and directed.

M&L for 25mm thick Cement concrete type B-0,1:2:4 mix (using 12.5mm graded crushed stone aggregate) as levelling course complete all as specified and directed.

S&F Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles over and including 15mm thick screed bed or bedding layer in Cement Mortar 1:6 for laying floor finishes complete all as specified and directed.

S&F Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles over and including 15mm thick screed bed or bedding layer in Cement Mortar 1:4 for laying floor finishes complete all as specified and directed.

M&L for 100mm thick Plain Cement concrete type C-2,1:3:6 mix (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

M&L for Sand filling under floor including watering and consolidation complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver blocks (shape as per sample kept in AGE B/R (P) sample room) with grey cement and no pigment and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm garded crushed stone aggregate) as in copings including necessary form work, complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards /slabs/blankets any thickness including cover fillets complete all as specified and directed.

M&L for 4mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed in ceiling flat and sloping with nails to timber frame complete all as specified and directed

M&L for 4mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed in wall with nails to timber frame complete all as specified and directed

Dismantling of timber scantling in framed work under 40 Sqcm, in fillet rails, posts rafters purlin etc complete all as specified and directed.

Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in unframed work complete all as specified and directed.

M&L for clean swan Second class soft-wood in scantlings exc 40 sqcm as in framed work complete all as specified and directed.

S&F 2nd class soft wood plain fillets square rectangular or triangular in section wrought fixed with nails exc 3 Sqcm and n exc 6 Sqcm bull nosed, splayed, chamfered or rounded on one edge or face complete all as specified and directed

S&F 2nd class soft wood plain fillets square rectangular or triangular in section wrought fixed with nails n exc 3 Sqcm bull nosed, splayed, chamfered or rounded on one edge or face complete all as specified and directed

S&F in repairs vitreous china wash basins, size 550x400mm white flat back including cutting for and pinning in ends of brackets or erecting stand including 32mm dia brass waste coupling chromium plated with long screwed shanks & fly-nuts, flange end bedded in red lead/cement and other end fixed complete all as specified and directed.

S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for 15mm iron pipe and fixed complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet (Squatt pattern) white complete excluding flushing cistern and flush pipe "Orissa" pattern size 580x440 with integral foot rest inlet connection to trap incl anti syphonage pipe etc complete including jointing between flushing pipe and socket of WC complete all as specified and directed.

S & F Vitreous China Ware wash down water closet (Pedestal pattern), white (EWC) and fixed in repairs including seat cover with brass screws and excluding flush pipe and flushing cistern complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repairs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), triple layer hoisted and fixed in position 1000 ltrs capacity all as specified in SSR Part- I complete all as specified and directed.

S&F in repairs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer hoisted and fixed in position 500 ltrs capacity all as specified in SSR Part- I complete all as specified and directed.

Taking down carefully aluminium/copper point wiring (light fan socket or power) complete including making good disturbed surfaces of walls, floor to match with existing and keeping items aside for credit complete all as specified and directed.

M&L for point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including PVC casing and capping medium grade of suitable size run on wall/surface with all fittings (ISI Marked) controlled by one switch including CI/MS/ wooden sunk box of required size, & as directed by Engr in Charge & 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed. Note: Three runs of 1.5 sqmm cable and one run of casing and capping shall be measured as one unit for the purpose of payment.

Description all as per srl item No-30 here in above but for one 3 pin 5A socket outlet on independent board controlled by one switch complete all as specified and directed.

Description all as per srl item No-30 here in above but for one 5A socket outlet on the same board controlled by one switch complete all as specified and directed.

Description all as per item No-30 above but for 3 pin socket outlet 15 Amps on independent board with 2.5 Sqmm cable complete all as specified and directed.

S&F in replacement switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed.

S&F in replacement Socket outlet 3 pin, 5A, flush type complete all as specified and directed.

S&F in replacement Switch socket combination 2 in 1, 3 pin, 5 Amp flush type complete all as specified and directed.

S&F in replacement Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type complete all as specified and directed.

S&F in replacement lamp holder (Angular / Straight), insulated body, with back plate for batten fitting complete all as specified and directed.

S&F in replacement stepped type electronic fan regulator flush type on the existing sheet etc. AC, 230 volts, duly ISI marked with and including connector complete all as specified and directed.

S&F in replacement decorative ultra slim linear LED 18 Watt 4' long warm/White colour lighting fixture with extruded aluminium heat sink, environment friendly, energy efficient ready to use pack including LED tube complete with inbuilt electronic driver, PCB, connector block etc. including connecting up two core copper flexible cable from ceiling rose to fittings complete all as specified and directed.

S&F in replacement LED Lamp 9 W all complete all as specified and directed.

S&F in replacement LED Lamp 20 W complete all as specified and directed.

S&F in replacement MCB, SP(Single Pole), AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified and directed.

S&F in replacement MCB, DP (Double Pole), AC, 240 volts, B series capacity 40 Amps to 63 Amps 10kA and making connections complete all as specified and directed.

S&F in replacement including taking down old unserviceable 1100 volt grade flexible copper conductor cable 1 sqmm, two core complete all as specified and directed.

Supply and fixing including taking down old unserviceable 1100 volt grade copper conductor cable single core 1.5 sq mm (three runs) in and including PVC conduit of suitable size complete all as specified and directed Note : Two runs of single core PVC insulated cable with Copper conductor unsheathed cable of size 1.5 Sqmm and one run of 1.5 Sqmm PVC insulated copper conductor single core (earth wire) and one run of PVC conduit of suitable size shall be measured as single unit run for the purpose of measurement and payment thereof.

Description all as per item No 46 above but with single core PVC insulated cable with Copper conductor unsheathed cable of size 2.5 Sqmm complete all as specified and directed.

S&F in replacement passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 2.5 sqmm 2 core nominal cross section in service connections complete all as specified and directed.

S&F in replacement passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 6 sqmm 2 core nominal cross section in service connections all as specified and directed.

S&F in replacement casing capping 20 mm complete all as specified and directed.

S&F in replacement casing capping 25 mm complete all as specified and directed.

S&F in replacement Switch socket combination 2 in 1, 3 pin, 5 Amp with Box complete all as specified and directed.

S&F in replacement Switch socket combination 2 in 1, 3 pin, 15 Amp with Box complete all as specified and directed.

Supply and fixing in replacement PVC gang box for 6 way switch socket complete all as specified and directed.

S&F in replacement Connecting & testing Change over switch single Phase 230V on load of rating 32 AMPS and including sheet enclosure complete including taking out to old unserviceable change over switch complete all as specified and directed.

S&F in replacement LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all specified and directed.

S&F in replacement Connecting & testing Changeover switch 3 Phase 415V on load of rating 63 AMPS and including sheet enclosure complete including taking out to old unserviceable change over switch complete all as specified and directed.

Supply and Fixing in replacement Wall mounted fan 450 mm sweep, 230 volts AC single phase, 50 Hz, ISI marked, including necessary work in wall/sheet, including connection cable, nut bolt and other fixing material complete all as specified and directed.

Supply and Fixing in replacement exhaust fan 250 mm sweep PVC body with louver, 240 volts AC single phase, 50 Hz, ISI marked, including necessary cutting work in wall/sheet, making good including connection cable, nut bolt and other fixing material complete all as specified and directed.

Supply & Fixing in replacement water heater, storage type steel body with copper inner tank and heating element upto 3 KW capacity 50 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc complete all as specified and directed.

M/S BILAL AHMAD BHAT (BID ID -3054594)

M/S Hilal Builders (BID ID -3057249)

FIRDOUS AHMAD BABA (BID ID -3066679)

M/S Manzoor and Co (BID ID -3064532)