GE/DE-41/2020-2021

Amount

Excavation in post holes (or similar holes) in soft/loose soil each not exceeding 0.5 cum getting out, returning, filling in ramming earth or broken rubble in layers not exceeding 25 cm, watering and removing of surplus soil to a distance not exc 50m and making good surfaces, complete all as specified and as directed.

Surface excavation in soft/loose soil not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth : for foundation, etc or for shafts wells, cesspits, manholes etc., not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil, complete all as specified and as directed.

Returning, filling in, including spreading levelling watering and well ramming in layersn.exc 250 m thick on soft/loose soil, complete all as specified and as directed.

Removing excavated material not exceeding 50mtr and depositing where directed at a level not exceeding 1.5 m above the starting points in soils, complete all as specified and as directed.

Hard core of gauge not exceeding 63mm stone aggregate, deposited, spread and levelled in layers not exceeding 15 cm thick watering and ramming to a true surface, complete all as specified and directed

Plain cement concrete 1:4:8, Type D-2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete, complete all as specified and as directed.

Plain cement concrete 1:2:4, Type B-2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete, complete all as specified and as directed.

Plain cement concrete 1:2:4 type B-1 as in roof kerb or mud stops and similar items including weathering, slightly rounded or chamfered angles and throating on top of chajjas, rails, cills etc., complete all as specified and as directed.

Brick work with sub class “B” bricks straight or curved on plan exceeding 6mtr mean radius built in cement mortar 1:4 using old size bricks, complete all as specified and as directed.

Mild steel framed work as in doors (as in chowkats) or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (incl steel sheets) and hanging; also fastening and fixing (quality confirming to Fe-290 (Gde-E-165), complete all as specified and as directed.

Mild steel work such as angle iron post , flat iron in fencing including cutting top to required shape including welding with proper overlapping & welding MS Plate with angle iron bottom as directed, drilling holes notching for wire etc., embedded in concrete fixed vertically conforming to grade FE-290 E-165, complete all as specified and as directed.

Rolled steel Fe-410- W(Gde-E-250) quality B as in trusses (framed), trussed purlins, crane gantries,, rails and fastenings and heavy brackets (built up from beam, Tee or channel sections or angles or flat section etc.,) including distance pieces, cleats etc. complete all as specified and as directed.

Rolled steel Fe-410- W(Gde-E-250) quality B of compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc, complete all as specified and as directed.

Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

Pre-Painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection including finishing the surface even and fair, complete all as specified and as directed.

50mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base including finishing the surface even and rough, complete all as specified and as directed.

Pre-polished coloured chequered cement concrete tiles, factory made, Premium quality 300mm x 300mm x 20mm thick, set, jointed in neat cement slurry and pointed flush with grey cement mixed with pigments to match colour of blocks in floors over 15 mm thick screed bed or bedding layer in cementy mortar 1:4, complete all as specified and as directed.

Ultra chequered cement concrete tiles, factory made, Premium quality 300mm x 300mm x 20mm thick, set, jointed in neat cement slurry and pointed flush with grey cement mixed with pigments to match colour of blocks in floors over 15 mm thick screed bed or bedding layer in cementy mortar 1:4, complete all as specified and as directed.

Vibro compacted Precast concrete interlocking paver blocks, factory made,any shape and size conforming to IS- 15658- 2006 of 60mm thick, M-35 Grade set, jointed in neat cement slurry and pointed flush with grey cement mixed with pigments to match colour of blocks in floors laid over 30mm thick sand cushioning, complete all as specified and as directed.

Vibro compacted Precast concrete interlocking paver blocks, factory made,any shape and size conforming to IS- 15658- 2006 of 80mm thick, M-40 Grade set, jointed in neat cement slurry and pointed flush with grey cement mixed with pigments to match colour of blocks in floors laid over 30mm thick sand cushioning, complete all as specified and as directed.

75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base including finishing the surface even and rough, complete all as specified and as directed.

40mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in flooring including finishing the surface even and dmooth without using extra cement, complete all as specified and as directed.

Glazed ceramic tiles in vertical surface 300mm x 450mm x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in cement mortar 1:4, complete all as specified and as directed.

Machine cut kota stone slab 18 to 20 mm thick as in flooring laid over and including cement screed base 15mm thick in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed.

Machine cut kota stone slab 18 to 20 mm thick as in riser of steps, skirting, dado and pillar laid over cement screed 10mm thick in CM 1:4, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed.

Rendering 15mm thick cement plastering in cement mortar 1:4 on fair faces of brick masonry or concrete surface of walls including finished even and smooth without using extra cement, complete all as specified and as directed.

Preparing newly plastered surfaces of walls and applying two coats of cement based paint, complete all as specified and as directed.

Preparation of new steel surfaces and applying two coats of synthetic enamel paint on surfaces of any description exceeding 10 cm width or girth over a coat of red oxide complete all as specified and as directed.

15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs, complete all as specified and as directed.

20mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs, complete all as specified and as directed.

Rotational moulded polyethene water storage tank 1000 ltr capacity hoisted and fixed in position including 20mm dia float valve, complete all as specified and as directed.

Stop valve cast copper alloy, screwed down high pressure with capstan head for iron pipe 15mm bore, complete all as specified and as directed.

Stop valve cast copper alloy, screwed down high pressure with capstan head for iron pipe 15mm bore, complete all as specified and as directed.

15mm bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 90gms), complete all as specified and as directed.

Gun metal globe or gate valve screwed down high pressure with iron wheel head, screwed both ends for iron pipe 15mm bore, complete all as specified and as directed.

Gun metal globe or gate valve screwed down high pressure with iron wheel head, screwed both ends for iron pipe 20mm bore, complete all as specified and as directed.

NOTE:- For minimum fair wages ,EPF and payment to labour employed, refer Sch A Note No-14,15 and Special Condition No 5 & 21.2 of this tender. Contractor must produce all the relevent record such as payment made to labour, EPF etc at the time of payment of RARs/Final bill. No payment will be released to contrator without producing the proper record.

NOTE:- Irrespective of whatever specified elsewhere in tender documents, all the debris/waste materials produced out of above mentioned work shall be removed out of Cantonement land and disposed off at locations notified by the Delhi Cantonment Board for disposal of waste building materials within NCR area, without any extra cost to Department under own arrangement of contractors. The rates quoted by the contractors against the items catered here-in-above in the BOQ are inclusive of said provision.

aggarwal engineers contractors

imran construction company

M/s Shubh Enterprises