8202-REPAIRS TO VARIOUS TYPES OF CHAIRS, SOFASETS,FD PATTERN INCLUDING RECANNING POLISHING ETC AND REPAIRS TO ALL TYPES OF WOODEN FURNITURES, REPLACEMENT OF ACCESSORIES, POLISHING OF WOODEN FURNITURES, INCLUDING REPLACEMENT OF ACCESSORIES, ALL TYPE

Amount

Repairs to Chair Dining by removing the following existing unserviceable wooden members and providing new first class hard wood (teak) members, all as specified and as shown on drg (FD-228/279) & FD/MAP-II/05

Front Leg

Rear Leg

Side Rail of Seat Frame

Rear Rail of Seat Frame

Front Rail of Seat Frame

Back Rest

Stiffener (Side)

Stiffener (Centre)

PVC Seat 4 mm thick for dining Chair FD/MAP-II/05

Repairs to Chair dining offrs Map by removing the following existing unserviceable Components / members and providing new Components , all as specified and as shown on drawing FD/MAP-II/04 , FD/E6/MAP/10

S&F 75mm thick 40 density foam for seat

S&F Tapestry cloth for seat (cost of tapestry cloth not less than Rs.250/- per meter)

S&F 12mm thick BWR Ply wood for seat frame

Repairs to Chair Writing by removing the following existing unserviceable wooden members and providing new first class hard wood (teak) members, all as specified and as shown on drg (FD-250/280)

Front Leg

Rear Leg

Side Rail of Seat Frame

Rear Rail of Seat Frame

Front Rail of Seat Frame

Back Rest

Arm Rest

Stiffener (Side)

Stiffener (Centre)

Repairs to Chair Easy by removing the following existing unserviceable wooden members and providing new first class hard wood (teak) members, all as specified and as shown on drawing(FD-229)

Front Leg

Rear Leg

Side Rail of Seat Frame

Rear Rail of Seat Frame

Front Rail of Seat Frame

Arm Rest

Side Rail of Back Rest

Upper/Lower Rail of Back Rest

Repairs to Chair Easy with cushioned by removing the following existing unserviceable wooden members and providing new first class hard wood (teak) members, all as specified and as shown on drawing(FD-358)

Front Leg

Rear Leg

Side Rail of Seat Frame

Rear Rail of Seat Frame

Front Rail of Seat Frame

Arm Rest

Side Rail of Back Rest

Upper/Lower Rail of Back Rest

Synthetic foam 75mm thick, 28 density for seat frame

Synthetic foam 50mm thick, 28 density for back frame

Leatherised rexine of approved shade/texture/Quality for Seat, Back and Arm Rest

Supply & fixing of corner bracket made out of 1st class hard (Teak) wood of size 60 x 60 x 20mm thick to chair dining, Chair writing, Chair Easy, Chair easy cushioned , chair dinning officers.

Removing Existing U/S PVC Bushes/ shoes from chair dining, Chair writing, Chair Easy, Chair easy cushioned , chair dinning officers and supply and fixing new PVC rubber Bushes/ shoes of best quality as per approved sample

Taking off existing U/S cane of various type of wooden chairs, cleaning the rebated portions and re caning of furniture with new cane plastic 1.8 mm and width 3.5 mm Godrej pattern all as specified and as shown on drawing. Cane shall be of make Maharashtra/Swastik/Garware items are mentioned below:-

Dining Chair FD-228/279

Chair Easy seat & Back FD-229

Chair writing FD-250

Sofa Set 5 Seater / Single Seater (FD-281/373) Repairs to Sofa Set 5 Seater / 4 Seater by removing the following existing unserviceable wooden members and providing new first class hard wood (teak) members all as specified and as shown on drawing (FD-281/373)

Front Leg

Rear Leg

Arm Rest

Side Rail of Seat Frame

Front Rail of Seat Frame (for Single Seater)

Front Rail of Seat Frame (for Three Seater)

Support Rail of Back Frame (for Single Seater)

Support Rail of Back Frame (for Three Seater)

Upper/Lower Rail of Back Rest (for Single Seater)

Upper/Lower Rail of Back Rest (for Three Seater)

Wooden Battens

Cover for Sofa Set 5 Seater (FD-281/373) by removing old faded tapestry cloth and cover with new tapestry cloth of approved quality/shade for seat and back, duly stitched with zip arrangement all as specified and as directed by Engineer-in-Charge (cost of tapestry cloth not less than Rs.250/- per meter)

Supply and fix cushion for Sofa Set 5 Seater (FD-281/373) by removing old rubber cushions together with old faded tapestry cloth and provide 100mm synthetic foam 40 density of size 530mm x 500mm cushion covered with new tapestry cloth for seat and back of approved quality/shade, after providing cover made out of cloth and duly stitched with zip arrangement all as specified and as directed by Engineer-in-charge (cost of tapestry cloth not less than Rs.250/- per meter)

Repairs to Sofa Set 4 Seater (FD-281/373) by removing old faded tapestry cloth and cover with new tapestry cloth of approved quality/shade for seat and back, all as specified and as directed by Engineer-in-Charge (cost of tapestry cloth not less than Rs.250/- per meter)

Repairs to Sofa Set 4 Seater (FD-281/373) by removing old rubber cushions together with old faded tapestry cloth and provide 100mm synthetic foam 40 density of size530mm x 500mm cushion covered with new tapestry cloth for seat and back of approved quality/shade, all as specified and as directed by Engineer-in-charge (cost of tapestry cloth not less than Rs.250/- per meter)

Preparation of existing surfaces of following wooden furniture by smoothing through sand papering and applying two coats of french polish, all as specified and as directed by Engineer-in-charge for following items of furniture :-

Chair dining FD-228/279

Chair Easy FD-229

Chair writing FD-202/250/280

Chair Easy Cushioned FD-358

Sofa Set Single Seater FD-281/373/258

Sofa Set 5 Seater FD-281/373/258

Chair dinning officer, FD/MAP-II/04 , FD/E6/MAP/10

Repairs to Bed Plywood Top by removing the following existing unserviceable members and providing new members including french polishing all as specified and as shown on drawing (FD-246)

Removing the existing unserviceable one side teak faced plywood from the head board and providing new of size 900x450mm one side teak face plywood 4mm thick for both sides including providing teak wood beading of size 30x6mm alround of the head board and 12mm half cut teak wood beading at the plywood face as shown on drawing

All as per item No.11.01 here-in-before but for foot board of size 900x300mm

Removing the existing unserviceable Long Rail of size 90 x 35 x 1930mm made out of 1st class Teak Wood and supply and fix new long rail of size 90 x 35 x 1930mm as shown on drg.

Removing the existing unserviceable head board and S & F new head board all asper drg.

Removing the existing unserviceable Foot Board and S & F New Foot Board all asper drg.

Removing the existing unserviceable II nd class hard wood stiffeners of size 40 x 30mm and S & F New stiffeners all asper drg.

Removing existing unserviceable 12mm thick plywood from Bed plywood top and Supply and fixing of new plywood 12mm thick BWR of size 1800 x 900mm conforming to IS 303 and as shown on drg.

Repairs to Table Dining 8 Persons by removing the following existing unserviceable wooden members and providing new first class hard wood (teak) members, including french polishing all as specified and as shown on drawing (FD-239/273/376)

Legs for Table Dining

Long Rail

Short Rail

Stiffeners

Repairs to Table Dining 6 Persons by removing the following existing unserviceable wooden members and providing new first class hard wood (teak) members, including french polishing all as specified and as shown on drg(FD-239/273/376)

Legs for Table Dining

Long Rail

Short Rail

Stiffeners

Repairs to Table Peg by removing the following existing unserviceable wooden members and providing new first class hard wood (teak) members, including french polishing all as specified and as shown on drawing(FD-236/277/384)

Top Rail (Long)

Bottom Rail (Short)

Repairs to Table Centre by removing the following existing unserviceable wooden members and providing new first class hard wood (teak) members, including french polishing all as specified and as shown on drawing (FD-235/274)

Top Rail (Long)

Bottom Rail (Short)

Repair to Teapoy by removing the following existing unserviceable wooden members and providing new first class hard wood (teak) members, including french polishing all as specified and as shown on drawing(FD-232/382)

Long Rail

Bottom Rail (Short)

Repairs to Table Writing by removing the following existing unserviceable wooden members and providing new members of first class hard wood (teak), including french polishing all as specified and as shown on drg(/FD-249/275)

Legs for Table

Top Rail (Long)

Top Rail (Short)

Stiffener (Long)

Stiffener (Side)

Door Shutter with piano hinge

Back with 6mm thick commercial plywood

Repairs to Table 900x600x760mm with drawer by removing the following existing unserviceable wooden members and providing new first class hard wood (teak) members, including french polishing all as specified and shown on drawing (FD-231/283/284)

Legs for Table

Long Rail (Top)

Short Rail (Top)

Triangular TW Corner Brackets of size 75x75x25mm

Repairs to Table dressing ladies by removing the following existing unserviceable wooden members and providing new first class hard wood (teak) members, including french polishing all as specified and shown on drawing (Drg No FD-251 & FD-378)

Mirror of size 1220 x 366 x 5mm thick electro copper plated with back of 6 mm thick ply wood commercial grade

Mirror frame of size 25 x 19mm all around made out of I St class hard wood (Teak Wood )

Wooden member back for dressing mirror (ladies ) of size 45 x 40 x 1550mm

Top of size 380 x 900 mm made out of 18 mm thick pre-laminated particle board with one side teak finish and other side balancing white duly beaded with 6 mm thick teak wood beading

Sliding glass shutter of size 270 x 300mm x 5mm thick complete.

Back made out of 12mm thick plywood commercial, size of 380 x 900mm

Aluminium Channel of size 12 x22 x550mm

Aluminium Channel of size 12 x22 x380mm

Legs of size 45 x 45 x 150mm made out of 1 st class hard wood

Side rail of size 40 x 25 x 380mm

Front rail of size 40 x 25 x 900mm

Repairs to Table dressing Gents by removing the following existing unserviceable wooden members and providing new first class hard wood (teak) members, including french polishing all as specified and shown on drawing (Drg No FD 230 & FD 379)

Looking mirror of size 760 x 380 x 5 mm thick electro copper plated mirror with back of 6 mm thick ply wood commercial

Mirror frame of size 20 x 25mm all around

Wooden member back of dressing mirror (Gents ) of size 35 x 25 x 750mm

Top of size 300 x 900 mm made out of 12 mm thick pre-laminated particle board with one side teak finish and other side balancing white duly beaded with 6 mm thick teak wood beading

Back made out of 12mm thick plywood commercial, size of 300 x 900mm

Side Board (FD-26/FD-241)

Removing the existing unserviceable top of side board and supply & fixing new top of size 1200x450mm made out of 18 mm thick prelaminated particle board, exterior grade

Removing the existing unserviceable back of side board and supply & fixing new back of size 1200x625mm made out of 6mm thick plywood 5 ply, BWR grade all as specified and directed.

Removing the existing unserviceable door shutter of side board and supply and fixing new door shutter of size 600x375mm made out of 18mm thick particle board exterior grade suitable piano hinge all as specified and as directed.

Removing the existing unserviceable side panel of the side board and supply and fixing new side panel of size 625x450mm made out of 18 mm thick particle board exterior grade with teak ply veneered one side and commercial ply veneered to other side all as specified and as directed.

Supply and fixing CP knobs 20mm to drawers and door shutters of side board /Table Dressing Gents/ Table Dressing Ladies as per the sample kept in BSO office

Supply and fix top of various tables made out of 18mm thick prelaminated particle board, exterior grade, bonded with formaldehyde with one side teak facing and balancing white on the other side all the four edges shall be beaded with 4mm teak wood beading and polished with french polish all as specified and shown on drg.

Table Dining 8 Person (1800 x 900mm)

Table Dining 6 Person (1500 x 900mm)

Table Dining 3' x 3' (900 x 900mm)

Table Peg (450 x 300mm)

Table Centre (900mm x 450mm)

Teapoy (450mm x 600mm)

Table Writing (1150 x 600mm)

Table 900 x 600mm without Drawer/with drawer

Preparation of existing surfaces of following wooden furniture by smoothing through sand papering and applying two coats of french polish, all as specified and as directed by GE/Engineer in Charge for following items of furniture :-

Bed Hard with plywood top FD-246

Book Case FD-237,355

Wooden arm rest of tip up chairs (Auditorium)

Hat Stand FD-233/361

Side Board FD-26/FD-241

Table 900x900x760

Table Centre FD-235/274

Table Dining 6 Pers FD-239/273/376

Table Dining 8 Pers FD-239/273/376

Table Dressing Gents FD-230

Table Dressing Ladies FD-251/378

Table Peg FD-236/277/384

Table 900x600x760mm with /without drawer FD-231/284283224

Table Writing FD-249/275

Teapoy FD-232/382

Repairs to Tip- up Chairs by removing the following existing unserviceable members and providing new members

Removing the existing unserviceable rexine, from the seat of Tip- up Chairs, and supply and fix new rexine (textile) fabric coated as per existing shape & size all as specified and directed by GE/Engineer in Charge Make kurlon /Ufoam/SKDI

All as per Item No.24.01 above but for Back Rest

Removing the existing unserviceable foam cushion from the seat of Tip- up Chairs, and supply and fix new polyurethane foam cushion of 40 density as per existing shape & size all as specified and directed by GE/Engineer in Charge Make kurlon /Ufoam/SKDI

Removing the existing unserviceable foam cushion from the Back Rest of Tip- up Chairs, and supply and fix new polyurethane foam cushion 50 mm of 40 density as per existing shape & size all as specified and directed by GE/GE/Engineer in Charge Make kurlon /Ufoam/SKDI

Removing the existing unserviceable hard board back of Back Rest and supply & fix new hard board of existing size and shape duly Painted and serially numbered as per the direction of GE/Engineer in Charge

Removing the existing unserviceable hard board back of Seat and supply & fix new hard board of existing size and shape duly Painted as per the direction of GE/Engineer in Charge

Removing the existing unserviceable beading from Back Rest and supply & fix new PVC 'E' Beading of existing size and shape as per the direction of GE/Engineer in Charge

Removing the existing unserviceable wooden seat frame and Supply and fix new wooden seat frame made out of 2nd class hardwood (kongu/Sal/Vangai) of size 50 mm x 32 mm of existing size and shape of seat frame of Tip-up Chair all as per the direction of Engr in Charge

Removing the existing unserviceable wooden back rest frame and Supply and fix new wooden back rest frame made out of 2nd class hardwood (kongu/Sal/Vangai) of size 50 mm x 20 mm of existing shape of Tip-up Chair all as per the direction of Engr in Charge

Removing the existing unserviceable pvc wheels/rings from the sliding apparatus of the seat and supply and fix new pvc wheels as per the existing arrangements (sample kept in BSO office) and as directed by Engr-in charge.

Removing the unserviceable pvc bush from the existing push up system and supply and fix new pvc bush as per the existing arragement (sample kept in BSO office) and all as directed by Engineer-in –charge.

Supply & fix spring 100 mm long best quality (as per approved sample) for Tip-up chairs

Cleaning of pushing slide wheel with kerosence oil and apply best quality grease to easy and noise free movements of seal all as directed by GE/Engineer in Charge

Removing existing faded paint from base frame of tip up chair and applying one coat of synthetic enamel paint (approved shade) over a coat of red oxide asper direction of Engr in Charge.

LEO ENTERPRISES