REPAIR REPLACEMENT OF LIGHT FITTINGS, BOLLARD LIGHTS, ENERGY METERS, EXHAUST FANS, GEYSERS, METERS, PRESSURE PUMPS SUBMAINS, MCB DBS AND CONNECTED ITEMS AND REPAIR / REPLACEMENT OF EXTERNAL ------ ITEMS AT FORT AREA NAGPUR UNDER GE KAMPTEE.

Amount

Taking down point wiring with aluminum conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls/ floor etc to match with existing surfaces including white washing/colour washing/ distemper to match with existing wall/floor/ceiling finishes complete all as specified and as directed.

M&L for Point wiring complete for One light/Fan/Exhaust Fan/Bell point controlled by one switch with PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed on surface of wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete including dummy switches wherever required all as specified and making good disturbed surfaces complete all as specified and directed. Make : Finolex, Policab, KEI, Havells. Note :- Cost of cable of size 2.5 sqmm FRLSH provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly. (ii) The disturbed surfaces of wall for concealing box wiring shall be made good by applying cement plaster, putty and colour wash etc matching with the existing surfaces. The rate shall be deemed to include the cost of making good.

As per item No 2 above but One 3 pin 5 amp socket out point on the same board with other switches complete all as specified and directed.

As per item No 2 above but with cable size 2.5 sqmm for One 3 pin 5 amps socket out let point on independent board complete all as specified and directed.

As per item No 2 above but One bell/buzzer point controlled by one bell push complete all as specified and directed.

All as per item No 2 here in before but with cable size 4 Sq mm for one 5 pin 15/16 Amps socket out let on independent board and multistrand insulated copper earth continuity conductor of size 4.0 sqmm all as specified and directed

Supply and fixing modular switch piano single pole, one way 6 Amps 1 module, complete all as specified and directed.

Supply and fixing modular switch piano single pole, two way 6 Amps 1 module, complete all as specified and directed.

Supply and fixing modular switch piano flush type 16 Amps single pole one way, one module, complete all as specified and directed.

Supply and fixing modular socket outlet 2/3 pin 6 Amps combined 2 module, complete all as specified and directed.

Supply and fixing modular socket multipurpose 3 pin 6/16 Amps combined 2 module, complete all as specified and directed.

Supply and fixing modular step type two module electronic fan regulator heavy duty 120watts 240 volts. , complete all as specified and directed.

Supply and fixing Modular Bell push 6A 1 module pole, one way, complete all as specified and directed.

Supply and fixing in repair call bell, Ding dong type, 230 volts AC single pole complete all as directed.

Supplying & fixing for ceiling rose PVC Polycarbonate isolated body 62.5 x 25 mm, three terminals, complete all as specified & directed.

Supply and Fix Highly durable surface mounted 20 watts (4 feet) LED batten/surface constructed of fire retardant engineering grade extruded aluminium body 100 lumen per watt, min 2000 lumen and decorative end cap complete with driver including 3 core 1.0 sqmm copper conductor cable for connection and accessories all as specified and directed

Supply and Fix Highly durable surface mounted 10 watts (2 feet) LED batten/surface constructed of fire retardant engineering grade extruded aluminium body 100 lumen per watt, min 2000 lumen and decorative end cap complete with driver including 3 core 1.0 sqmm copper conductor cable for connection and accessories all as specified and directed

Supply only Decorative wall light fixture made up of Polycarbonate, suitable for 9/10W LED bulb alongwith 9W. Make: Havells Cat No LHFHCHE1TL1W020 or equivalent in Wipro / Philips/CG

Supply and fixing Lamp holder/angle holder insulated body with black/white plate for batten fittings incl 7 watt LED Bulb complete all as specified and directed.

Supplying, fixing in replacement & testing Bulk head , luminaire 10 watt LED, internally prewired with and including premium quality diffuser for glarefree light and easy to install snap fit installer complete with all accessories, and connecting the same to electric source with & using PVC sheathed and insulated three core copper conductor cable of size 0.50 Sqmm and fixing arrangements for fixing the light fitting complete all as specified & directed.

Supply and fix building security light LED 25 W with Lumen O/P 2000-2500 with driver with rated voltage 240 V, 50Hz,including mounting GI (made out of 25 mm dia light grade pipe 0.8 m to 1.2m bent to shape including FI clamps nut bolts etc complete all as specified and directed.

Supply and fix Wall decorative light Crafted from durable aluminum die-cast and adorned with glass panels (Coffee High (Antique Gold), seamlessly blending glass and metal in a luxurious amber and gold finish. BIS certified LED and drivers. Fixture Overall Dimensions L (40.7 cm) x W (19.1 cm) x H (38.1 cm), Material : The Frame Is Made Of Metal With An Antique Gold Finish And Is Accompanied By Beige Fabric Shades Reinforced With Plastic, complete all as specified and directed. Make : Jainsons Emporio Note : Sample of light to be provided by the Engr-in-Charge.

Supply and fix Wall decorative light Contemporary style (Amisos 5-Lamp Picture Light), seamlessly blending glass and metal in a luxurious amber and gold finish. BIS certified LED and drivers. Fixture Dimensions 50cmx12cmx12cm (LxWxH), Material : Glass, Colour : Gold complete all as specified and directed. Make : Jainsons Emporio Note : Sample of light to be provided by the Engr-in-Charge.

Supply and fix Wall decorative light (Brilliance Bay WALL LIGHT),Elegant and sophisticated, the Maribel Wall Light is an exquisite lighting fixture for contemporary interiors. BIS certified LED and drivers. Fixture Dimensions 20cmx5cmx20cm (LxWxH), Material : Carbonsteel+Glass, Colour : Amber complete all as specified and directed. Make : Jainsons Emporio Note : of light to be provided by the Engr-in-Charge.

Supply and fix Wall decorative light Crafted with precision (Maribel Wall Light), seamlessly blending glass and metal in a luxurious amber and gold finish. BIS certified LED and drivers. Fixture Dimensions 12cmx12cmx28cm (LxWxH), Material : Glass, Colour : Amber complete all as specified and directed. Make : Jainsons Emporio Note : Sample of light to be provided by the Engr-in-Charge.

Supply and fix Wall decorative light Crafted from durable aluminum die-cast and adorned with glass panels (Frost flower Wall Light), seamlessly blending glass and metal in a luxurious amber and gold finish. BIS certified LED and drivers. Fixture Dimensions 25cmx18cmx43cm (LxWxH), Material : Aluminum dicast and glass, Colour : Black & white, complete all as specified and directed. Make : Jainsons Emporio Note : Sample of light to be provided by the Engr-in-Charge.

Supply and fix Wall decorative light Crafted from durable aluminum die-cast and adorned with glass panels (Kystalamp Wall Light), seamlessly blending glass and metal in a luxurious amber and gold finish. BIS certified LED and drivers. Fixture Dimensions 38.5cmx22.5cmx38.5cm (LxExH), Material : Carbon steel, Colour : Gold & Black, complete all as specified and directed. Make : Jainsons Emporio Note : Sample of light to be provided by the Engr-in-Charge.

Supply and fix LED Foot Light - 3W Die cast aluminium housing, PC diffuser, IP65 white & grey finish. BIS certified LED and drivers. Fixture Dimensions 38.5cmx22.5cmx38.5cm (LxExH), Material : Carbon steel, Colour : Gold & Black, complete all as specified and directed. Make : Jainsons Emporio Note : Sample of light to be provided by the Engr-in-Charge.

M & L for LED profile light (warm) including aluminium housing frame for fixing concealed false ceiling or on surface complete all as specified and directed and connection /fixing of LED strip light complete all as specified and directed.

Supply and fixing Hanging light 12 watt, slim magnetic, Crafted from Aluminum Die Cast with Bi-Directional Beam. Its integrated LED ensures long-lasting and energy-efficient with IP65 Protected.

Supply in replacement post top lantern LED type 40 watt, 230 watt volts AC outdoor type with 360 degree indirect light IP 65 protection, Aluminium Light Fixture complete all as sepcified and directed. Note : Sample of light to be provided by the Engr-in-Charge.

Supply & fix fittings with surface mount /recessed mount LED down lighters 12 W (Round/Square) including driver with rated voltage 240 V , 50 Hz, complete all as specified and directed.

Supply & fix fittings with surface mount /recessed mount LED down lighters 15 W (Round/Square) including driver with rated voltage 240 V , 50 Hz, complete all as specified and directed.

Supply and fix 9 Watts Black/white Body LED Spot Focus Wall Light 13Cm Height (Indoor/outdoor Use) (Warm White, Aluminium Body) complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt (Warm white/cool white), 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and directed.

Supply and fixing GALAKTIC SMART STRIP LIGHT - (RGB) 3000 K IP65 5 Mtr), High brightness IP65 LED strips with uniformity of light required for perfect outdoor application Complete all as specified and directed.

Supply and fixing Flexion AC LED strip Rope 144D Strip 3000 K IP65 50 Mtr (Warm White), High brightness IP65 LED strips with uniformity of light required for perfect outdoor application Complete all as specified and directed.

Supply and fixing BRILLANTE LINEAR WALL WASHER 6H 7 W 3000 K, Crafted from Aluminum Die Cast with Bi-Directional Beam. Its integrated LED ensures long-lasting and energy-efficient with IP65 Protected. Complete all as specified and directed

Supply & Fix projector lights 304 made out of stainless steel housing tempered glass diffuser 12V AC warm white IP68 protection 8W complete all as specified and directed. Make:- Jaquar Cat No LSPK68R108SW or equivalent in Philips /Syska

Supply and fixing in replacement new generation, energy saving and environmental friendly long life LED Flood light fitting made up of pressure die-cast aluminium housing with high power LEDs as lightighting source and lens embedded,electronic driver type 170-200 watt LED , IP 66 complete all as specified and directed.

Supply, installation, testing and commissioning of commercial type wall mounted electric chimney made out of IS Certified Width : 90Cm, Suction Power : 1298m3/hr, Function Type : Auto clean, 6 way suction, Filter type : Baffle filter, Finish : Black Tampered Glass Control : Gesture & 3 Speed Touch Speed, Led : 2x 1.5W LED, Warranty : 5 years on product, 12 years on motor Product Dimension (WxDxH) (mm) : 600x425x595mm, including aluminium pipe and hole in wall by mecahnical (core cuting) method only, complete all as specified and directed

Supply and fix wireless call bell 01 receiver 05 bell push (moveable) distance upto 30 mtrs, complete all as specified and directed

M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed in wall of the following sizes :- 2x2.5 Sqmm with earth wire of 1x2.5 Sqmm including dismantling of old unsv submain wiring complete all as specified and directed.

As per item No 43 above but 2x 4.0 Sqmm with earth wire of 1x4.0 Sqmm complete all as specified and directed.

As per item No 43 above but 2x 6.0 Sqmm with earth wire of 1x6.0 Sqmm complete all as specified and directed.

As per item No 43 above but 4x 10.0 Sqmm with earth wire of 2x10.0 Sqmm complete all as specified and directed.

Supply & Fix modular motor starter 20A , 2 module for AC complete all as specified and directed.

Supply & fixing of sheet metal enclosure Vertical TPN DB 4 Way double door As per IEC 61439-3, Suitable for Flush Mounting and Surface Mounting, With 250 A Copper Busbar for each phase with 2 Neutral bar, 2 earthbar and Cable ties for Cable manage-ment, fully insulated busbar & shrouded Neutral bars, Improved Pan assembly for easy of installation, Prefitted masking sheet, Reversible Door for IP 54 DB's, alongwith 125 Amp MCCB as incomer including dismantling of old unsv DBs complete all as specified and directed.

Supply and fixing MCB DB single pole with neutral sheet metal enclosure double door type, 240Volts AC, with 200 amp rat-ed bus bar of suitable size plate and common neutral link all en-closed in standard steel sheet flush mounting type factory fab-ricated, powder coated complete with out MCB and with enclo-sure blank plates for unused way suitable for 4 way ISI marked including dismantling of old unsv DBs complete all as specified and directed.

All as per item No 40 above but for 12 way, complete all as specified and directed.

Supply and fixing MCB TPN 40-63 Amp rating 415V, 10KA 'C' curve and current carrying ca-pacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing MCB SP 6 to 32 Amp rating 240V, 10KA 'C' curve and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing MCB SPN 40-63 Amp rating 240V, 10KA 'C' curve and current carrying ca-pacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fix LED COB lights 12 watt, New generation, energy saving, aesthetically designed, recessed mounted down light pressure die-cast aluminum heat sink & high efficiency long life, mounted on MCPCB with high efficacy of 140 lm/W used for enhanced lumen output complete all as specified and directed.

Supply and fix LED COB lights 6 watt, New generation, energy saving, aesthetically designed, recessed mounted down light pressure die-cast aluminum heat sink & high efficiency long life, mounted on MCPCB with high efficacy of 140 lm/W used for enhanced lumen output complete all as specified and directed.

Supply and fix in replacement of MPM2-5100-V24 Single Phase 1 HP Booster Pressure riser with Tank Pump Size: 25x25 mmSeries: MMB, Voltage: 220 VType of Product: Booster Pressure Pump with Tank, Flow Rate: 3900-1380 LPH Head: 15-44 m Model No: HMPM2-5100-V24, Power Rating: 0.75 kW, complete all as specified and directed.

M & L for re-winding of ceiling fan 1200mm/1400mm sweep which of copper winding with proper grade/guage super enamelled copper winding wire so as to achieve original specifications i.e current rating and RPM (RPM test of ceiling fan with suitable tachometer will be done by contractor and shown to deptt , tachometer will be provided by contractor at their own expense) and all insulating materials (spares will be used and measure in respective items) and reasembling etc complete all as specified and directed.

Description all as per item No 57 here-in-before but for exhaust fans of size 225 mm sweep to 380 mm sweep complete all as specified and directed.

Description all as per item No 57 here-in-before but for wall fans of size 400 mm sweep to 380 mm sweep complete all as specified and directed.

M & L for replacement of defective ball bearing for ceiling fans/exhaust fans/Air-circulators of any size and of any make complete all as directed. Make: NBC/TATA/SKF

M & L for replacement of defective capacitor of size 2.5 mfd ISI marked for any type of fans suitable for 250V/230V including making connection complete all as specified and directed. Make : Havells/Falcon/Epcos/Tibcon

M & L for replacement of gun metal bush suitable for any type/model/size of fans complete all as specified and directed.

M & L for spray painting of ceiling fans/exhaust fans/wall fans of any size, any type and any make motor, body, blade and frame with one coat of synthetic enamel paint by spray painting to achieve smooth and uniform finish incl removal of existing paint, filling up cavities with filler and writing of MES No with black paint complete all as specified and directed. (Note :- Painting of fans must be done before delivery of fan by contractor to Deptt on the same day.)

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), complete all as specified and directed

Supply and fix in replacement of 300mm sweep air fresher, single phase, 900 RPM including fixing of mounting frame including louver shutter on outer surface of the wall and connecting with and including three core copper conductor of 1.5 Sqmm cross sectional area of required length from ceiling rose to exhaust fan including suitable size flexible PVC conduit, complete all as specified and directed.

Supply and fix in replacement of 300mm sweep made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, complete all as specified and directed

Supply and fix in replacement of 200/250mm sweep made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, complete all as specified and directed

Supply and fix electric water heater, storage type steel body with steel inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc, complete all as specified and directed

Supply and fix electric water heater, storage type steel body with steel inner tank and heating element upto 2 KW capacity 35 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc, complete all as specified and directed

Material and labour for making hole of suitable size for 300/250 sweep sweep exhaust fan in wall or window with grill etc and including grouting bolts, cutting chasing and plastering, painting etc., to match with the existing surface complete all as specified and directed.

Supply and fixing in repair of Heavy duty hanging clamp suitable for 1200/1400 mm sweep complete all as specified and directed

Supply and fixing in replacement of 400mm wall/oscillating air circulators, 230volts, AC, single phase complete with all fixing accessories all as per site requirement, complete all as specified and directed.

S&F in replacement heating element 2 KW (Traingular type) made of copper, ISI marked, 230 Volts suitable for 25/50 Ltr capacity of Geysers as per site requirement , brass metal, CP complete all as directed. Make : Theeta/Racold/Bajaj

S&F in replacement Heating element 2 KW (Assembly type) made of copper, ISI marked, 230 Volts suitable for 25 Ltr capacity of Geysers as per site requirement complete all as directed Make : Theeta/Racold/Bajaj

S&F in replacement Thermostat made of copper, ISI marked, suitable for 25 Ltrs capacity of Geyser as per site requirement complete all as directed. Make : Theeta/Expo/Hi Champion

S&F in replacement PVC connection Hot water grade 18” long 15 mm dia with two Nos coupling nut of brass, heavy duty, ISI marked, complete all as specified and directed. Make : Prayag/Bajaj/Racold

S&F in replacement PVC connection Hot water grade 24” long 15 mm dia with two Nos coupling nut of brass, heavy duty, ISI marked, complete all as specified and directed. Make : Prayag/Bajaj/Racold

Supply and fixing in repair modular switch piano single pole, one way 6 Amps 1 module, complete all as specified and directed.

Supply and fixing in repair modular switch piano flush type 16 Amps single pole one way, one module, complete all as specified and directed. Make : Havells/Anchor/HPL

Supply and fixing in repair modular socket outlet 2/3 pin 6 Amps combined 2 module, complete all as specified and directed.

Supply and fixing in repair modular socket multipurpose 3 pin 6/16 Amps combined 2 module, complete all as specified and directed.

Supply and fixing in repair modular step type two module electronic fan regulator heavy duty 120watts 240 volts. , complete all as specified and directed.

Supply and fixing in repair Modular Bell push 6A 1 module pole, one way, complete all as specified and directed.

Supply and fix in replacement Flame Retardant (FR) PVC casing caping of Size 25 mm x 16 mm (length 6 feet) , Ivory Colour, Unplasticised formulation for prolong storage or usage, double lock, ISI Marked as per IS 14927, Highly durability, Resistance to oil and grease, complete all as specified and directed.

Supply and fix in replacement Flame Retardant (FR) PVC casing caping of Size 38 mm x 16 mm (length 6 feet) , Ivory Colour, Unplasticised formulation for prolong storage or usage, double lock, ISI Marked as per IS 14927, Highly durability, Resistance to oil and grease complete all as specified and directed.

Supply and fix in repair of 5 Amp socket, 5 pin all as specified and directed.

Supply and fix in repair 16 Amp socket, multipurpose as specified and directed.

Supply and fix in repair Plug top 16 Amp ,3 pin, 240 Volt all as specified and directed.

Supply and fix in repair switch socket combination16 Amp , 240 volt with Box all as specifeid and directed.

Supply and fix in repair switch socket combination 6 Amp , 240 volt with Box all as specifeid and directed.

Supply and fix in repair piano switch 6 Amp , 240 volt all as specifeid and directed.

Supply and fix in repair piano switch 16 Amp , 240 volt all as specifeid and directed.

Supply and fix in repair Electronic fan regulator step type (Switch/socket) type, AC, 230V all as specified and directed.

Supply and fix in replacement 1.5 sqmm 3 core copper wire FRLSH Complete all as specified and directed.

Supply and fix in replacement 2.5 sqmm 3 core copper wire FRLSH Complete all as specified and directed.

Supply and fix in replacement 4 sqmm 3 core copper wire FRLSH Complete all as specified and directed.

Material & Labour for cutting & taking out the existing surface / / switch plate with switches / sockets and replacing with Modular PVC flush box with modular cover plate with frame 3 module complete all as specified and directed. Note:- The disturbed surfaces of wall for concealing box wiring shall be made good by applying cement plaster, putty and colour wash etc matching with the existing surfaces. The rate shall be deemed to include the cost of making good. Switches, sockets, regulators etc to be measured and paid separately.

All as per item no 97 but Modular PVC flush box with modular cover plate with frame 4 module complete all as specified and directed.

All as per item no 97 but Modular PVC flush box with modular cover plate with frame 6 module complete all as specified and directed.

All as per item no 97 but Modular PVC flush box with modular cover plate with frame 8 module complete all as specified and directed.

Supply and fix in replacement of electronic meters temper proof single phase LCD display with polycarbonate cover 230 V, 10-60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH

Supply and fix in replacement of electronic meters temper proof three phase LCD display with polycarbonate cover 415 V, 10-60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH

Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr deep in soft/loose soil and getting out for taking down/laying Pipe lines of any description and in any position including forming sides and bottom surface to required level/ gradients complete all as specified and directed.

Returning, filling in, excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Removing excavated materials not exceeding 50 Mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point.

Taking down the unserviceable LT cable of any size from tranches/ walls /floor etc complete all as specified and as directed.

Supply and laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sqmm 4 Core, ISI marked in trench/floor/on pole/wall complete all as specified and directed.

Supply and laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 Sqmm 4 Core, ISI marked in trench/floor/on pole/wall complete all as specified and directed.

Supply & Fixing in replacement LED fittings IP65 rated LED Bollard with soft 360 deg light distribution 8/9W, 230V, 50Hz complete on suitable PCC 1:2:4 alongwith suitable connectors to connect with 10sqmm X 4 core cable having protection from water and soil complete all as specified and directed.

Supply and fix Double wall Corrugated High Density Polymer Ethyl (HDPE) pipe For laying of Electric cable of size 50mm outer diameter and 38 mm inner Diameter with IS 14930 (part 2):2001 laid in trenches,wall,floor,pole including bends, sockets and other connected accessories complete all as specified and directed.

Supply and lay in replacement of GI tube medium grade 50mm size as in cable protection pipe including all fittings, including FI clamp for fixing complete all as specified and directed.

Supply & fixing , Rigid non-metallic PVC conduit of size 20mm exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends andfixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed.

Supply and fix in repairs thermoplastic cable entry junction boxes of size 190x140x100 mm and IP-66/67 protection level with metric knock out fixed on poles with MS clamps, nuts, bolts and washers including MCB SPN, 5-32 amps, 'C' series, breaking capacity 10 KA, 'C' curve 240 volts, 50Hz including necessary incoming and outgoing electric connection with suitable size of copper lugs etc., separate (detachable) gland plate, bakelite connector 4 way 20 amp, dust and vermin proof, front door opening with hinges and locking arrangement, complete all as specified and as directed.

Material and labour for PCC Type D2 ,1:3:6 by using ( 40 mm aggregatestone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets andrailings upto 60 cm in height, copings, complete all as specified and directed.

Material and labour for PCC Type B1 1:2:4 by using ( 20 mm aggregate stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets andrailings upto 60 cm in height, copings, complete all as specified and directed.

S&F in repair Ball valves high pressure, with polythene float and flynut complete, screwed for iron pipe and fixed complete of size 25/32/40 mm dia complete all as specified and directed.

M&L and T&P for disconnecting DG set connection, shifting, installing, testing and commissioning of DG set of any capacity from one location to other location in the Nagpur Area complete all as specified and directed Note: Cost of materials required for connecting, commissioning and testing of transformer shall be deemed to be included in quoted rate.

M&L for earthing complete with galvanized earth plate electrode 600 x 600 x6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level ) with top edge of the plate not less than 1.50 M below normal ground level , connected to and including galvanized steel wire 4mm dia as earth lead soldered and riveted to earth plate by means of nuts, bolts, check nuts & washers, of galvanized iron or steel with connected to test point and testing on completion including 15mm GI light grade pipe for earth lead protection from earth point to earth plate, including provn adequate quantity of charcoal dust mixed with 35 % common salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate with 20mm bore medium grade GI Pipe for watering,GI check nut, funnel and wire mesh with and including all necessary excavation & earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre,,PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 and as directed. NOTES:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor.

Supply and fix LED flood light luminaires of capcity 20 watts with pressure die cast aluminium housing heat resistance toughened glass, IP 66 protection complete with driver, with suitable size Flat Iron clamps, nuts, bolts, washers and fixing accessories complete all as specified and directed.

Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection. LED and driver should be BIS certified complete all as specified and directed.

Supply and lay in replacement of GI tube medium grade 40mm size as in cable protection pipe including all fittings, including FI clamp for fixing complete all as specified and directed.

Material and labour for steel tubular pole (modified) with 4 flood lights fixing of size (11.0 meter long) complete with base plate 250x250x10 mm and finial taper plug, nuts and bolts including foundation and coping complete all as specified and directed. Note : The pole to be designed as per Drawing which is to be provided by Engr-In-Charge. Flood light to be measured separately.

Supply and fix in repairs thermoplastic cable entry junction boxes of size 250 x 220 x 135 mm and IP-65 protection level with metric knock out fixed on poles with MS clamps, nuts, bolts and washers including MCB SPN, 5-32 amps, 'C' series, breaking capacity 10 KA, 'C' curve 240 volts, 50Hz including necessary incoming and outgoing electric connection with suitable size of copper lugs etc., separate (detachable) gland plate, bakelite connector 4 way 20 amp, dust and vermin proof, front door opening with hinges and locking arrangement, complete all as specified and as directed.

Supply & Fixing PWM Lamp/LED dimmer module, 12V/24V, 5A per channel. Dual Complementary outputs, IP68 (waterproof) and wire-ended. Controlled by a remote light level sensor, lamp/LED brightness is proportional to ambient light level (lux level). Ideal for Street light, flood light and bollards lights, illumination needs to be dimmed together automatically/manual. complete all as specified and directed.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, 4 sqmm 2 core , served with inner sheathing of PVC tape and overall PVC sheathed in service connections, complete all as specified and as directed .

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, 10 sqmm 2 core , served with inner sheathing of PVC tape and overall PVC sheathed in service connections, complete all as specified and as directed .

Supply and Fix LED driver for flood lights, post top lights and bollard lights etc suitable for 20 to 80 W LED as specified with protection from short circuit, over load, over voltage with input voltage 180-260 volts, 50 Hz , IP65 protection complete all as specified and directed.

Supply and fix 9 Watts Black/white Body LED track light with aluminium frame for moving Light (Indoor Use) (Warm White/Cool white) complete all as specified and directed.

Materials and labour as in replacement for earthing complete with galvanized earth plate electrode 600 x 600 x6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level ) with top edge of the plate not less than 1.50 M below normal ground level , connected to and including galvanized Iron Strip 32x6mm as earth lead soldered and riveted to earth plate by means of nuts, bolts, check nuts & washers, of galvanized iron or steel with connected to test point and testing on completion including 40mm GI light grade pipe for earth lead protection from earth point to earth plate, including provn adequate quantity of charcoal dust mixed with 35 % common salt to a packed thickness of not less than 32 cm in alternate layers of charcoal and salt on all sides of earth plate with 20mm bore medium grade GI Pipe for watering,GI check nut, funnel and wire mesh with and including all necessary excavation & earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre,,PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 and as directed. NOTES:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 39263.00]

M/S. ELECTROPOWER TECHNOLOGIES (BID ID -3157649)

Devika Constructions (BID ID -3158163)