Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.0 LAccepted-AOC | L1 | Accepted-AOC Accepted being L-1 | |
| 2 | L2₹20.8 L+₹3.4 L (19.5%)Rejected-AOC | L2 | Rejected-AOC Not accepted being L-2 | |
| 3 | L3₹21.5 L+₹4.1 L (23.8%)Rejected-AOC | L3 | Rejected-AOC Not accepted being L-3 | |
| 4 | L4₹23.1 L+₹5.8 L (33.2%)Rejected-AOC | L4 | Rejected-AOC Not accepted being L-4 | |
| 5 | L5₹23.2 L+₹5.8 L (33.5%)Rejected-AOC CHUSHUL | LEH LADAKH | LADAKH | 194101 | L5 | Rejected-AOC Not accepted being L-5 |
Tender Value
₹19.5 L
EMD Value
₹39,000
Closing Date
3 Aug 2022, 10:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PARTAPUR
GE PARTAPUR
Provn of Soakage well qty 02 Nos at 30 Independent R And O and Special Repairs to Bldg No T 220 at Fd Wksp under AGE BR I of GE Partapur
2022_MES_538008_1
GE/P-47/2022-23
Open Tender
Civil Works
Works
180 days
GE PARTAPUR
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE PARTAPUR
₹39,000
Yes
29 Aug 2022
14 Jul 2022
4 Aug 2022
15 Jul 2022
3 Aug 2022
28 Jul 2022
16 Jul 2022 - 28 Jul 2022
Amount
Dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation board/slabs/ blanket any thickness including cover filllets.
M&L prelaminated particle board, interior grade, 9 mm thick prelaminated one side with decorative choice laminated and other side balancing white lamination, fixed in Ceiling with screws to timber frame complete all as specified.
M&L prelaminated particle board, interior grade, 9 mm thick prelaminated one side with decorative choice laminated and other side balancing white lamination, fixed in walls with screws to timber frame complete all as specified.
S& F for 25 mm teak wood lipping,6mm thick fixed with nails over veneered board joints complete
Dismantling timber framed in fillets,rails, posts rafters,purlines, etc under 40 sq cm in section
M&L second class Hardwood plain filllets, rectangular in section, clean swan, secured with nails/screw exc 13 and n.exc 25 Sqm
Dismantling of plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering, complete all as specified and directed by Engr-in-charge.
S&F Galvanised MS sheeting of 0.63 mm thick corrugated ISI Marked and made of shakti with two cougation side laps and fixed with J hookes two framed work with PVC and steel washers as in roof & wall all as spd and as drected by Engr-in-Charge
S&F Plain, galvanised, mild steel sheeting of 0.63 mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 all as spd and as drected by Engr-in-Charge
S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;
M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide premier.
All as per above item but old steel surfaces.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
M&L Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. Set and jointed in neat cement slurry and pointed in coloured cement to match including 15 mm thick screed bed in cement and sand mortar 1:4
Taking down chowkhat or door frames including shutters exc 1.5 sqm n exc 4 sqm each complete
Taking down chowkhat or door frames including shutters n exc 1.5 sqm each complete
S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specifeid and directed by engr-in-charge
S& F of Fe-290(Gde E-165) Framed work as in doors or gates of angle or other sectionwith gusset plates, rails,braces, etc., complete, drilled forfixing of steel sheeting or othercovering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified.
S & F 35mm thick, 2nd class HW, plain framed, panelled shutter (one panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified
M&L 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified and directed.
S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165.
M&L preparation of new wooden surfaces, two coats of synthatic enamel paints, over a coat of pink primer, surfaces of any discription, not otherwise discribed, over 10 cm width or girth for doors,ceiling, complete.
S&F 100 mm long butt hinges medium weight cold rolled MS and fixed all as specified
S&F Aluminium, anodised, barrel tower bolts 100mm of extruded section and fixed
S&F 150 mm Aluminium alloy, anodised, sliding door bolt with hasp and stapple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.
S&F 150mm Extruded aluminium alloy handles, fabricated type. Anodised
S&F in repair vitreous china wash basin, white, flat back, size 550x400 mm including brackets, cutting pinnning in ends of brackets or erecting stand but exclusive of fixing, incl coupling and waste pipe etc complete assembled all as specified and directed.
S&F 32mm bore waste coupling of PTMT (Half or full threaded) (min weight 32mm-45gms/40mm-60gms) as specified and directed
S&F in repair cromium plated 15 mm bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed
S&F in repair 15mm pillar taps fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for iron pipe complete.
S&F in repair PVC inrepair valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets capacity 10 ltrs, all as specified.
S&F PVC connection of 15 mm sixe with PTMT nuts of length 450 mm , complete all as specified and directed by Engr-in-charge.
S&F in repair 15mm Stop valves/ angle cock , fency type, chromium plated, long shank screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.
75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement .
S&F in repair chromium plated towel rail D type 60 cm long between flange.including bracket
Taking up or down steel tubing 20mm and connections, including cleaning for refixing or removal to store.
Taking up or down steel tubing 25mm and connections, including cleaning for refixing or removal to store.
S&F 25mm outer diameter 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN-16) UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.
S&F 20mm outer diameter 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN-16) UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.
S&F in repair 25mm bore gun metal, globe or gate valve, with iron wheel head screwed both ends fore iron pipes fixed complete.
S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete
S&F 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete
Demolition of unreinforced cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level).
M & L for PCC 1:4:8 type D2 (40 mm graded agg) in foundation,filling and mass concrete complete.
M & L for type B1 1:2:4 providing, cement concrete in roof kerbs or mud stops, rounded orchamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets andrailings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not providedfor ,water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed
Providing cement concrete type C-1, 1:3:6 ( using 20mm graded stone aggregate), 50 mm thick as in plinth protection laid in bays not exceeding 2 Sqm each and finishing even and fair on top without using extra cement with 6mm wide joints throughout the thickness of plinth protection in concrete bays complete all as specified and directed.
M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors incl over 20mm thk screed bed in CM 1:4
S & F in repair puff water tank 500 litres capacity, insulated cylindrical vertical type double layer duly filled with glass wool with closed top hoisted and to resist in temprature -30 degree to +35 degree celcius fixed in position with all fittings over PCC platform complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided complete.
S&F FE 290 (Gde E-165) Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc.
Constr of soakage well incl excavation in hard/dense soil, PCC 1:3:6 type C2,(using 40mm graded crushed stone aggregate) in foundation, hone combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM 1:4, RCC cover slab in M-25/ SFRC cover, inter connecting pipes of RCC /DWC complete filled with brick bat of size (3.00 mtr dia x 4.50 mtr deep).complete all as specified
Plain cement concrete (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes incl packing under and hauching against the side of pipes after they are laid and tested for 150mm bore SGSW pipes complete Note-(i) Thickness of concrete bed shall be 100mm. (ii) The payment of concrete hauching for the portion over offset of the manhole shall be paid under Item No 10 below.
S&F 150mm dia SGSW pipe laid in trenches and jointed as specified
S&F 100mm dia cast iron soil, waste and vent pipes in any length as specified.
M & L pre cast cement concrete block masonry solid blocks type C1 1:3:6 ( 20 mm graded aggregate) exceeding 10 cm width , set in CM 1:4 as in manholes all as specified and directed.
M&L Rendering 10mm thick on fair faces of brick works in cement mortar 1:4 including finishing plaster surfaces even and smoothing without using extra cement complete all as specified.
M&L RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in manhole cover slab set in CM 1:4 complete all as specified.
M&L cement concrete type B0 1:2:4 (12.5 mm graded aggregate ) in cills, steps, seismic and other similar bands, plinth courses , string courses, lacing courses, parapets and railings upto 60 cm in height, copings kneelers, apex stones, bed plates, kerbs etc all as specified and directed.
S&F mild steel TMT bars 10 mm dia and over , cut to length bent to shape required , including cranking , bending spirally for hooping for coloumns , hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.9 mm dia or securing with clips all as specified and as directed.
M/L for PCC (1:3:6) type B-1 using 20mm graded crushed stone aggregate as in benching, water troughs and the like including slightly rounded chamfered angle and throughting etc all as specified and directed by Engineer-in-Charge.
Taking up the existing cables from trenches of any size all as specified and directed.
Supply, laying,fixing, passing through pipe or laid in trenches and testing underground XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts grade cross section area 16 sqmm 2 core complete all as specified and directed.
Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtrs in depth for laying of cable, fixing of stay etc 10 Sqm on plan and n exc 1.5 in depth and getting out in hard/dence soil complete all as specified and directed by Engineer-in-Charge.
Returing, filling in incl spreading, levelling watering and well ramming in layers n.exc 25cm width, Complete all as specified and directed by Engineer-in-Charge.
Removing excavated soil to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 m above starting point Completed all as specified and diercted by Engineer-in-Charge.
Sand cushioning for under ground cable 8 cm before laying the cable and 15 cm after laying and streching the cable complete all as specified and directed by Engineer-in-Charge.
M&L Un-reinforced precast factory made concreate cable covers, class LV type-I, with flat size 250x150x40 mm Complete all as specified and directed.
Taking down carefully damaged copper/aluminum point wiring (light/fan/socket or power) complete including fixture and fittings such as switches, ceiling roses, cassing & capping, pendants, sockets, light fitting etc and making good disturbed surfaces of wall/roof complete all as specified and directed.
Taking down of MCB DB 4/8/12 way including mcb sp and spn and making good of wall complete all as specified and directed.
M&L Point wiring with 1.5 Sqmm (nominal area) copper conductor FRLS cable (multi-stranded) PVC insulated and unsheathed electric cable 1100 volts drawn through PVC casing and caping of suitable size (as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 1.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated Hylum ISI marked for following complete all as specified and directed by Engr-in-Charge. Note:- Screw used for fixing TW baords, casing and caping ceiling rose, square blocks etc should be nickel cadmium screws.
One light point controlled by one 5 Amps one way switch
One 3 pin socket outlet 5 Amps on independent board
One 3 pin socket outlet 5 Amps on same board
M&L point wiring for power point with 4.0 sqmm (nominal area) copper conductor FRLS cable ( multi-stranded) PVC insulated and unsheathed cable conductor 1100 Volts drawn through PVC casing capping of suitable size(as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 2.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated Hylum ISI marked for following complete all as specified and directed by Engr-in-Charge. Note:- Screw used for fixing TW baords, casing and caping ceiling rose, square blocks etc should be nickel cadmium screws.
S & F Switch piano flush button single pole one way 5 Amps, 240 Volts complete all as specfied and directed by Engr-in-Charge.
S&F switch socket combination 3 pin, 5 Amps, 2 in 1 flush type (multipurpose) suitable for 2 pin / 3 pin plug complete all as specified and directed by Engir-in-Chage.
S&F switch socket combination 2 in 1, 3 pin, 5/15 Amps, flush type (multipurpose). Complete all as specified and directed by Engr-in-Charge.
S&F Ceiling rose surface backelite ISI marked with 3 terminal including connecting and testing complete all as specified and directed.
S&F MCB DB sheet enclosure,Double door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 8 way complete all as specified and directed.
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed.
Supply and fixing MCB SPN 240V, 10KA 'C' curve (40-63) Amp current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed.
Supply and fixing Rechargeable LED inverter Bulb energy saver 9 W ,B22 (220-240 V) 50 hz, 6500k, fast charging 2200 mAH battery inbuild ,white color all as specified and as directed. Make- Phillips stellar bright or equivalent
S&F surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver tube light fitting 20W, 4 ft long, 220 Volts , and connecting to ceiling rose with three core twisted flexible copper cable of suitable size complete all as specified and directed.
M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground not less than 2.25m deep below normal ground level (with the top edge of the plate not less than 1.50 m below the normal ground level) connected to GI earth wire 4 mm by means of GI bolts, nuts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I connected to earthing test point with and including necessary excavation and earth work in any strata PCC pit 1:3:6 type C-1, 20mm bore medium grade GI pipe for watering 15mm bore light grade pipe for GI wire protection and funnel including 40mm thick RCC slab cover and testing on completion all as specified and as directed.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete making all necessary connection with suitable capacity of 3 core circular cable complete all as specified and directed.
M & L for GI Pipe (medium grade,ISI Marked) 32 mm dia ,1.5 mtr long ,bend to shape for street light fitting bracket ,with 2x pairs of MS clamps of suitable length of size 40x5 mm of MS flat iron with nuts bolts and washer and taking out old one including connection with street light complete all as directed.
Supply and fix exhaust fan 250 mm sweep iron type (make-Havells venti air DX or equivalent) all as directed and specified.
S&F of water heating system/Hamam of capacity 500 ltrs with Diesel/kerosene burner of 5 incl with boiler and Diesel/kerosene tank inner sheet made of 10 SWG mild steel sheet and outer sheet shall be made of 16 SWG of mild steel sheet. Glass wool insulation of 25 mm thickness to be provided between outer and inner sheet. 100 mm dia MS pipes is to be fitted in centre which will act as heater. One direct water connection for inlet of water. Funnel for pouring water manually to be provided. One over flow pipe, 3 outlet of hot water from the boiler to be provided. Inner chamber is to be painted with boiler paint and external steel surface are to be painted with two coats of synthetic enamel paint over a coat of red oxide incl necessary components like stand for hamam, stand for fuel tank and fuel pipe for connecting burner, diesel/kerosene tank etc, complete all as specified and directed by Engineer-in-Charge.
Deduct Schedule of Credit of Rs (-) 41900.00 (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount. Note :- Tenderers will not quote against this item being a firm amount.
M/S MOHD KARIM
BETONG BUILDERS
osho traders
THINLES OTZER
M/S LIBE & CO
M/S HAJI MOHD ALI
HONY CAPT RIGZIN SAMPHEL
M/S BHAT ENGINEERS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .