Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.9 LAccepted-AOC | L1 | Accepted-AOC aoc | |
| 2 | L2₹18.1 L+₹49,356 (2.81%)Rejected-Finance ANAND NAGAR ROAD NO 4 RAJAKHEDI MAKRONIA SAUGOR MP | SAUGOR | SAUGOR | MP | L2 | Rejected-Finance 2nd lowest bid | |
| 3 | L3₹18.3 L+₹69,594 (3.96%)Rejected-Finance | L3 | Rejected-Finance 3rd lowest bid | |
| 4 | L4₹18.5 L+₹90,089 (5.13%)Rejected-Finance | L4 | Rejected-Finance 4th lowest bid | |
| 5 | L5₹18.9 L+₹1.3 L (7.27%)Rejected-Finance | L5 | Rejected-Finance 5th lowest bid |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
14 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SAUGOR
GE SAUGOR
REPAIR, MAINT OF MD ACCN IN AREA OF AGE BR-I UNDER GE SAUGOR.
2022_MES_553136_1
GE/SGR/TOK-44 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
SAUGOR
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GARRISON ENGINEER SAGAR
₹40,000
Yes
16 Dec 2022
20 Sept 2022
16 Nov 2022
20 Sept 2022
14 Nov 2022
2 Nov 2022
Amount
S&F pre- coated coloured galvalume Aluminum Zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa (AZ150) as in roof covering/ clading to wall, including crimping sheet at end fixed with self tapping screws including dismantling of Asbestos cement (corrugated, semi corrugated, etc) sheets roofing complete all as specified and directed.
S&F pre- coated coloured galvalume Aluminum Zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa (AZ150), 0.6m wide as in ridge or closing gable truss including crimping sheet at end fixed with self tapping screws including dismantling of Asbestos cement (corrugated, semi corrugated, etc) sheets as ridge complete all as specified and directed.
S&F structural steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 including dismantling exisitng steel roof truss complete all as specified and directed.
S&F structural steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats, etc., including dismantling exisitng steel roof truss complete all as specified and directed.
S&F mild steel plates (plain or chequered) channels square cut to or notched forming holes with riveted bolted or welded attachment for Fe-410W complete all as specified and directed.
S&F mild steel screw bolts (machine made) with hexagonal / square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, length of bolt exc 22.5cm & not exc 30cm long, dia of shank 16mm to 20mm complete all as specified and directed..
M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer of surfaces over 10cm width or girth complete all as specified and directed.
M&L for one coat of synthetic enamel paint on old painted steel based surface of any desription over 10cm width or girth incl preparation surfaces such as removing all splashes, drops, dirt and leaving premises in a clean state complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding and removed of rubbish off the premises complete all as specified and directed.
Demolition of cement concrete unreinforced in ground floor and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) including demolition of brickwork or stone/boulder masonry, built in cement or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified & directed.
M&L for brick work with with sub class 'B' bricks, straight orcurved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed.
M&L for 100mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregates) as in sub bases of floors and finished the surface even and rough to receive the topping layer complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) as in plinth protection surface finished even & smooth using extra cement providing with construction joints 10x20 mm filled with bitumen and sand mortar 1:3 complete all as specified and directed.
M&L for vitrified ceramic tiles 10mm thick (square/rectangular) light shade, polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed layer in CM 1:6 complete all as specified and directed.
All as per Srl item No.15 above but in dado / skirting laid over and including 10 mm thick rendering in CM 1:4 -ditto-
M&L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exc 0.11 Sqm but not exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match coiour/shade laid over and including 15mm thick screed bed layer in CM 1:6 complete all as specified and directed
M&L for non skid joint free coloured ceramic tiles 7 to 8 mm thick area of each tile exc 0.18 Sqm but not exc 0.38 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match coiour/shade laid over and including 15mm thick screed bed layer in CM 1:6 complete all as specified and directed
M&L for glazed ceramic joint free coloured tiles of size 450x300x7mm thick on vertical surfaces such as skirting, dado, etc., laid over & including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade /colour of tiles complete all as specified & directed.
M&L for 25 mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates) as in levelling course of sub base finished even and rough to receive the topping layer complete all as specified & directed
M&L for 18mm to 20mm thick pre-polished Granite slab, machine cut, for floors/ shelves,cooking platforms window cill, steps, jambs and pillor top laid over and including15mm thck CM 1:4 cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of Granite stone complete all as specified & directed.
M&L for rounding, chamfer, splays or arris and smooth finishing at the edges of stone as in steps, cooking platform and other similar locations complete all as specified and directed.
M&L for grinding and polishing mirror finish of existing Kota stone slab flooring including skirting etc complete all as specified & directed
Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc and rubbish off the premises complete all as specified & directed.
M&L for cement plaster in two layers on stone masonry surfaces or surfaces other than fair face of brick work ,first layer 15 mm thick in cement mortar (1:6) and second layer cement plaster 10 mm thick in cement mortar (1:4) with WPC @ 3% by weight of ement, finished the surfaces fair and even complete all as specified & directed.(Note:- WPC shall be measured and paid seperately under respective item)
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6), finished the surface fair and even complete all as specified & directed.
M&L for rendering 10 mm thick on ceiling in cement mortar (1:3), finished the surfaces fair and even complete all as specified & directed.
M & L for prepration of newly plastered wall sufaces & applying two coats exterior emulsion weather proof paint over one coat of exterior wall primer incl of walls complete all as specified and directed by Engr-in-charge. Make Asian ACE or equivalent make as approved by GE
M&L for preparation of newly plastered surfaces of wall and applying 2mm thick Birla / J K wall care white putty on walls and applying two coat of Interior Acrylic emulsion over a coat of alkali resistant primer complete (internal wall) complete all as specified and directed.
M&L for complete removal of existing treatment on wall and prepration of old surfaces & applying Birla / J. K. wall care white putty 2 mm thick for levelling the surfaces including properly making of 'V' shaped crakes and filling of all crakes with crakes seal of walls and applying two coat of distemper oil Emulsion over a coat of wall primer incl. preparation of surfaces of walls complete all as specified & directed.
M&L for applying three coats of white wash on newly plastered ceiling surfaces including preparation of the surfaces complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each, complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 sqm but not exc 4.0 sqm each complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm but not exc. 2 Sqm each complete all as specified and directed
Taking down shutters of any description not exc 1 Sqm complete all as specified and directed
S&F Solid PVC frame (single rebated) of size 50mm x 47mm made out of wood grain printed PVC sheet reinforced with MS Square tube, supply and fixing in opening complete all as specified and directed
S&F factory made soild PVC moulded door shutter, 28mm to 30 mm thick (stiles) with wood free EPS with 2, 4 or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification and drawings.
S&F pressed steel frames of size 125mm X 60mm with rebate on both side including necessary fixing lugs hinges, locks strike plate etc (thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6 complete all as specified
S&F pressed steel frames of size 105mm X 60mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc (thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6 complete all as specified and directed.
Cutting holes in brick walls in cement mortar or cement lime mortar and stone wall built in lime mortar for inserting holdfasts in exc. One brick but not exc. two brick wall and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.
M&L for PCC 1:3:6 type C-0 (using 12.5mm grade stone aggregates) as in filling of Chowkhats or pressed steel door frame etc complete all as specified & directed.
M&L for PCC 1:3:6 type C-1 using 20mm grade stone aggregates) for bed blocks of hold fast, etc complete all as specified and directed.
S&F 35mm thick Flush shutters , solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed
S&F 35mm thick second class hardwood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc (without sash bars) edges of farrming plain chamfered or rounded fitted with cut and mitred beads for securing glass etc ,size of member of shutter as specified in SSR Part -I ,section 8,clause 8.20(a) supplied and fitted to chowkats complete all as specified and directed
M&L for repair of existing aluminium door including takingdown and refixing in the same location with all necessary fitment for repair all as specified and directed by Engr-in-charge.
S&F in replacemnt glazed aluminum door powder coated of any colour consisting of frame of 63mm x 38 mm size with shutter fixed on frame both side openable on pivotal arrangement with including necessary cutting holes in wall & floor Door shutter consists of top rail size is 84.45x44.45 mm , bottom rail & lock rail size is 101.80 x 44.45 mm & style of door shutter is 83mmx 44.45 mm glazed with 5mm thick tinted /colour glassof approved make with handles 2 Nos in each door , hinges has fitted on frame as required fixed with rubber gasket & aluminum beading any No of panels with aluminum handle , locking arrangemen,floor spring and floor door stopper incl. necessary joining cleats , glazing clips etc complete (aluminum section thickness 2 mm) confirming to IS complete all as specified and directed.
S&F in rep[lacement powder coated aluminium ventilators partially fixed and partially openable either top hung or side hung and bottom portion fixed having 4mm thick frosted glass and top portion having two shutters external shutter with 4mm thick frosted glass and interal shutter having stainless steel wiremesh 0.36mm dia for Bath / WC including rubber gasket and alumium beading with necessary cleats / locking arrangement complete all as per standard engineering practice including necessary cutting holes on wall and floor complete all as directed by Engr-in- Charge (Note:-Aluminium section weighing not less than 0.55kg/m } complete all as specified and directed.
S&F in replacement aluminium windows and ventilators sliding type three track powder coated consisting of frame 91.80 mm x 45 mm shutters 39 mm x 18 mm with rollers and locking arrangements with 4 mm thick plain glass with rubber gasket and aluminium beading , Al. handle,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia etc including necessary cutting holes on wall and floor and confirming to IS complete all as directed by Engr-in- Charge (Al. section thickness 1.50 mm )
S&F MS butt hinges 100 mm size medium weight, coled rolled and fixed with screws complete all as specified and directed.
S&F Stainless steel butt hinges 100 mm and fixed with screw complete all as specified and directed
S&F for 200mm size Aluminium anodised barrel tower bolt of extruded section and fixed with screws complete all as specified and directed.
S&F extruded aluminium alloy handles, fabricated type., anodised Size of handle 125 mm fixed with steel screws complete all as specified and directed.
S&F 250mm long Aluminium alloy anodised sliding door both with hasp, staple( bolt type) and fixed clips of sheet , cast or extruded sections and fixing bolts and sliding of extruded sections or cast -aluminium alloy and fixed with steel screws complete all as specified and directed.
S&F mild steel 150 mm, ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed.
S&F 3mm thick Sheet glass ordinary quality frosted on side fixed wdn beads / oil putty in square n. ex 0.50 sqm in each pane including hacking out old broken glasses (any thickness size qualityor description) from wdn frames or fixed with beads complete all as specified and directed.
S&F stainless steel wire cloth 0.36 mm nomiral dia and wire and average width of aperture 1.40 mm fixed with stainless steel wire staples complete all as specified and directed
S&F Rotational moulded polyethylene water storage tanks capacity 500 litres (cylindrical vertical with closed top) hoisted and fixed in position, three layered wall construction including dismantling of old unserviceable water tank and complete all as specified and directed.
S&F Rotational moulded polyethylene water storage tanks capacity 1000 litres (cylindrical vertical with closed top) hoisted and fixed in position, three layered wall construction including dismantling of old unserviceable water tank complete all as specified and directed.
S&F 20mm Ball valves, high pressure of PTMT with high density plastic bass screwed for iron pipe and fixed (min wt 20mm - 210 gms) complete all as specified and directed.
S&F in repairs 20mm dia bore Gun metal, Globe or gate valves, with iron head or lever screwed both ends for iron pipe fixed complete all as specified and directed.
Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring. etc. and making good, cutting not exceeding 10cm girth complete all as specified and directed.
S&F in repalcement 15mm Galvanised Mild steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
Taking down and refixing 15mm GI tubing medium grade to walls and ceilings or laying in floors complete all as specified and directed.
S&F in repalcement 20mm Galvanised Mild steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
Taking down and refixing 20mm GI tubing medium grade to walls and ceilings or laying in floors complete all as specified and directed.
S&F in repair PVC low level flushing cistern of 10 Ltr capacity including flushing pipe bend etc complete all as specified and directed.
S&F in repair single piece white ceramic glazed wall mounted/floor mounted water closet of and concealed cistern flush tank including slow motion seat cover ,CP rack bolt-screw pair, inlet&outlet rubber gaskets weigth not less than 20kg complete all as specified and directed (Make : Brand Generic, Jaquar or equivalent make as approved by GE)
S&Fin repair vitreous Chinaware EWC pedastal type closet white with P trap, seat & cover with flat bottom with hinging device complete all as specified and directed.
S&F in repair vitreous China squatting pan “ORISSA” pattern size 580mm X 440mm, white with P or S trap front or back inlet with integral foot rest (excl flushing cistern & flush pipe) and including connection to trap & to flushing pipe anti syphonage pipe etc (excluding flushing cistern) complete including making good to floor complete all as specified and directed.
S&F in repair vitreous China WHB white flat back size 550mm x 400mm with and including MS brackets, CP pillar tap fancy type - 01 No of 15mm bore, CP waste coupling 32mm dia, 32mm dia PVC waste pipe of suitable length and PVC connections 15 mm size with PTMT nuts of length 450 mm high pressure complete all as specified and directed.
S&F in repairs wall mixture with crutch for mixing hot & cold water, fancy type, chromium plated, screwed for iron pipe or for unions 15mm bore complete all as specified and directed.
S&F in repairs Single lever basin mixer without popup waste and 450 mm long braided Hoses suitable for 15 mm bore iron pipe complete all as specified and directed. Make :Jaquar Cat No ARI-39001B or equivalent make as approved by GE.
S&F in repair Hand shower (Health faucet) with 8mm dia , one metre long flexible tube & wall hook complete screwed for iron pipe bore dia 15mm complete all as specified and directed. Make :Jaquar or equavalent make as approved by GE
S&F in repairs choromium plated brass jet sprey suitable for EWC including CP chord complete all asspecified and directed.
S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing with cantilever brackets and connecting union to pipe overall size 915mm x 460mm; bowl size 410mm x 330mm x 160 mm complete all as specified and directed.
S&F in repairs CP bib taps, cast copper alloy, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.
S&F as in repair C P Multi bib tap 2 in 1 , cast copper alloy fency type with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm boreand fixed complete all as specified and directed.
S&F in repairs angle valve /stop valve15 mm bore dia, cast copper alloy, fancy type chromium plated, screwd down, high pressure, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified & directed.
S&F in repairs concealed stop valve 15mm bore dia, cast copper alloy, CP fancy type with long shank and cup screwd down, high pressure, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified & directed.
S&F in repairs brass chromium plated shower rose fancy type, 125 mm size with swivel joints, including fixing to steel pipe or union complete all as specified and directed.
S&F PVC connections 15mm bore size 450mm in length with both end brass/pvc high quality nuts complete all as specified & directed.
S&F in repairs 110mm bore PVC (SWR) pipes single soketed in any length with rubber ring jointed laid in trenches or in floors complete all as specified & directed.
S&F in repairs 110mm bore PVC (SWR) pipes single soketed in any length with rubber ring jointed and fixed to walls with mild steel clamps of suitable size complete all as specified & directed.
S&F in repairs 75mm bore PVC (SWR) pipes single soketed in any length with rubber ring jointed laid in trenches or in floors complete all as specified & directed.
S&F in repairs 75mm bore PVC (SWR) pipes single soketed in any length with rubber ring jointed fixed to wall with mild steel clamps of suitable size complete all as specified and directed.
S&F PVC (SWR) bends 110 mm dia complete all as specified and directed.
S&F PVC (SWR) bends 110 mm dia with access door complete all as specified and directed.
S&F PVC (SWR) bends 75 mm dia complete all as specified and directed.
S&F PVC (SWR) bends 75 mm dia with accessable door complete all as specified and directed.
S&F PVC (SWR) 110 mm dia junction, single(single 'T') equal or unequal with acess door complete all as specified and directed. .
S&F PVC (SWR) 75 mm dia junction, single(single 'T') equal or unequal complete all as specified and directed. .
S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed..
S& F in repairs of 75mm dia PVC (SWR) multi floor trap with Hinge type SS grating including jointing with solvent cement complete all as specified and directed.
S&F in repair 25 mm bore MS powder coated conduit curtain rods, suitable for door/window curtain with fancy type powder coated mild steel dooms with brackets fitted to each end and fixed to wall including removal of existing rod and making good complete all as specified & directed.
Supply only integral waterproofing compound complete all as specified and directed
M&L for PCC 1:2:4, type B-1 (using 20 mm graded stone aggregates) etc on roof top as a leveling course / padding to maintain the slope,finished the surface even and fair without using extra cement complete all as specified & as directed .
M&L for water proofing roof treatment to RCC roof with approved modified membrane of weighing not less than 3 kg/Sqm in the following sequences including taking down of old roof treatment of any description including mud phushka, lime, concrete, tiles, cement plaster padding upto n exc 20 cm depth from roof surface etc including cleaning, brushing and watering to joints and grooves and removing debris to a distance exc 1.5 km complete all as specified and directed:-
(a) The surface of roof, parapet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brushing and dusting. (b) M&L for 10mm thick plaster in CM 1:4 mixed with water proofing compound @ 3% by weight of cement applied over roof slab complete all as specified and directed. (Note:- WPC shall be measured and paid separately) (c) Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kg per sqm to be applied on prepared surface till the surface is properly impregnated. (d) Applying one coat of hot blown bitumen of 85/25 grade @ 1.20 kg/Sqm. (e) Laying of water proofing APP modified polymeric water proofing membrane of weight not less than 3 Kg / sqm composed of 100 micron (+10% ) high density polyethylene sheet (HMHDPE) as center core, which is sandwitched between high quality polymeric bitumen mix having softening , high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps100 mm as per manufacture instruction etc. (f) Applying one coat of hot blown bitumen of 85/25 grade @ 1.20 kg/Sqm. (g) Applying aluminium paint in two coat @ 100 gm/sqm in each coat on finished membrane surfaces, complete all as specified and directed by Engr-in-charge.
Pandey Construction and Engrs
v k builder
M K Construction
maharaja construction and suppliers
M/S vikas jain
M/s Vinod Kumar Korpal, Sagar
EX SERVICE MEN SECURITY AND MAN POWER SERVICES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .