ADDITION / ALTERATION OF GUARD POST FROM 01 TO 14 HEMRL PUNE UNDER GE I RND PASHAN PUNE

Amount

Dismantling tile work in floors and wall laid in cement mortar including stacking material within 50 m lead for any type of tiles for thickness of tiles upto 25 mm complete all as specified and directed.

Demolishing cement concrete, manually / by mechanical means including disposal of material within 50 m lead, complete all as specified and directed.

M&L for PCC type B1 1:2:4 (1 cement : 2 coarse sand(zone-III) including manufactured sand derived from Recycled concrete aggregate (RCA) upto 25% : 4 graded stone aggregate 20 mm nominal size including Recycled Concrete Aggregate (RCA) upto 25% ) complete all as specified and directed.

M&L for 18 to 20mm thick Kota stone slab flooring laid over and including 20 mm thick screed bed l and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand), complete all as specified and directed.

M&L for 18 to 20mm thick Kota stone slabs in risers of steps, skirting, dado and pillars laid over and including 12 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing, complete all as specified and directed.

M&L for providing and laying Ceramic non-skid/matt floor tiles of size 300x300 mm (7 to 8 mm thickness ) of 1st quality conforming to IS : 15622 of approved make in any colours laid over and including 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete all as specified and directed.

M&L for providing and fixing 1st quality ceramic glazed floor tiles (7 to 8 mm thickness ) conforming to IS : 15622 of approved make in any colours of any size as approved in skirting, risers of steps and dados laid over and including 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3Kg per sqm including pointing in white cement mixed with pigment of matching shade, complete all as specified and directed.

M&L for providing and fixing in repairs CP brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms, 15 mm nominal bore, complete all as specified and directed.

M&L for providing and fixing in repairs CP brass stop cock (concealed) of standard design and of approved make conforming to IS:8931, 15 mm nominal bore, complete all as specified and directed.

M&L for providing and fixing CP brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 for 15mm nominal bore complete all as specified and directed.

Dismantling WC Pan of all sizes including disposal of dismantled materials i/c malba all complete all as specified and directed.

M&L for providing and fixing water closet squatting pan (Indian type WC pan ) with and including 100 mm sand cast Iron P or S trap including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests, complete all as specified and directed.

M&L for providing and fixing PTMT grating of approved quality and colour. 125 mm nominal dia with 25 mm waste hole complete all as specified and directed.

Dismantling 15 to 40 mm dia G.I. pipe internal wall including stacking of dismantled pipes (within 50 metres lead) complete all as specified and directed.

M&L for providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anticorrosive bitumastic paint, cutting chases and making good the wall: 15 mm dia. nominal bore complete all as specified and directed.

M&L for providing15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:4 complete all as specified and directed.

M&L for providing 12 mm cement plaster in CM 1:6 (1 cement: 4 fine sand) complete all as specified and directed.

M&L for Interior & Exterior Finishing : Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete all as specified and directed.

M&L for two coats of distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coat wherever required, to achieve even shade and colour for old surfaces complete all as specified and directed.

M&L for finishing walls with Acrylic Smooth exterior paint of required shade Old work (Two coats applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface complete all as specified and directed.

Taking out doors, windows and clerestory window shutters (steel or wood) of area 3 sqm and below including stacking within 50 metres lead complete all as specified and directed.

M&L for providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling to be paid for separately) 21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) complete all as specified and directed.

M&L for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required Powder coated aluminium (minimum thickness of powder coating 50 micron) complete all as specified and directed.

M&L for providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :35 mm shutterswith kiln seasoned second class hard wood with ISI marked MS pressed butt hinges complete all as specified and directed.

M&L for providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws complete all as specified and directed.

M&L for providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing 30 mm thick plain PVC door shutters complete all as specified and directed.

M&L for providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete 100X58X1.90 mm complete all as specified and directed.

M&L for providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 300x16 mm complete all as specified and directed.

M&L for providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 200x10 mm complete all as specified and directed.

M&L for providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 125 mm complete all as specified and directed.

M&L for providing and fixing wash basin in repairs with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps complete all as specified and directed.

M&L for providing and fixing in repairs P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - 10 litre capacity - White complete all as specified and directed.

M&L for providing and fixing in repairs unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.15 mm nominal bore with 45 cm length complete all as specified and directed..

M&L for providing and fixing C.P. brass shower rose in repairs 150 mm diameter with 15 or 20 mm inlet complete all as specified and directed.

M&L for providing and laying factory made Precast concrete solid blocks of 200 mm thickness of grade M10 made of C&D waste from approved manufacturer in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) complete all as specified and directed.

M & L for 15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement : 4 fine sand) on fair faces of brick work or concrete surfaces complete all as specified and directed.

M&L for Grading roof for water proofing treatment with plain Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size complete all as specified and directed.

M&L for 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 over PCC (while concrete is green) using approved liquid water proofing compound (WPC will be measured separately and dosage as per manufacturers instruction complete all as specified and directed.

Supply only Liquid water proofing compound complete all as specified and directed.

M & L for porous concrete surfaces to be primed with primer. Providing and applying a single component pitch free polyurethane based coating that cures by reaction with atmospheric moisture to form a tough but flexible waterproofing membrane. It is elastomeric, seamless waterproof membrane applied in 2 coats to achieve DFT 1.5 mm thick having a elongation capacity of over 600% . Termination to be done on wall extending the coating to min.300mm height above the finished floor level and sealed inside the groove of 20mm wide x 10mm thick flushed with polymer modified mortar as per vendor recommendation. Laying 200gsm non woven geo textile membrane over coating with overlap sealed using synthetic rubber adhesive before providing screed concrete complete all as specified and directed.

Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level complete all as specified and directed.

M&L for providing and placing on terrace (at all floor levels) polyethylene three layered water storage tank (white colour), IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

M&L for distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour New work (two coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre complete all as specified and directed.

M&L for finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) complete all as specified and directed.

M&L for providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : - (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

M&L for PCC 1:5:10 (1 cement : 5 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 10 graded stone aggregate 40 mm nominal size including Recycled Aggregate (RA)) complete all as specified and directed.

M&L for providing and fixing in repairs 20mm gun metal gate valve with C.I. wheel of approved quality (screwed end) screwed both ends for iron pipe, complete all as specified and directed.

M&L for providing and fixing in repairs 20mm bore ball valve (brass) of approved quality, High or low pressure, with plastic floats , complete all as specified and directed.

M&L for providing and fixing in repairs 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers, complete all as specified and directed.

M&L for providing and fixing in repairs PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms complete all as specified and directed.

M&L for providing and fixing in repairs PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour, 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms complete all as specified and directed.

M&L for providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete all as specified and directed.

M&L for providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm), Complete all as specified and directed.

M&L for providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm complete all as specified and directed.

Taking down Cement plaster / Raking out joints on stone walls, etc. including hacking for key, scrubbing down with water, etc complete all as specified and directed.

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift up to 1.5 m, complete all as specified and directed.

M&L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) complete all as specified and directed.

M&L for providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand)Dark shade pigment using ordinary cement complete all as specified and directed.

M&L for providing and laying factory made Precast concrete solid blocks of 200 mm thickness of grade M10 made of C&D waste from approved manufacturer in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) complete all as specified and directed.

M & L for 15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement : 4 fine sand) on fair faces of brick work or concrete surfaces complete all as specified and directed.

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : II) 2.10.1.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia complete all as specified and directed.

M&L for providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : ii) 150 mm dia. R.C.C. pipe complete all as specified and directed.

M&L for constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 complete all as specified and as directed

M&L for making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design/ TD dwg With common burnt clay F.P.S. (non modular) bricks of class designation 7.5, complete all as specified and as directed

M&L for septic tank of 10 users capacity, excavation in hard soil, foundation in PCC, RCC ,brick work in CM 1:4, RCC manholes cover, vent shaft and sludge chambers as per TD drawing , complete all as specified and directed.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil complete all as specified and directed.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, all kinds of soil complete all as specified and directed.

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, (Ordinary rock) complete all as specified and directed.

M&L for providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) complete all as specified and directed.

M&L for random rubble masonry with hard stone in below plinth level a including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like. 7.2.1 Cement mortar 1:6 (1 cement : 6 coarse sand) complete all as specified and directed.

M&L for providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers a Made of G.I. wire of dia 4 mm complete all as specified and directed.

M&L for supplying at site Angle iron post & strut of required size of grade Fe-290 (E-165) including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia incl tie rod of 10mm dia in two lines etc. complete all as specified and directed.

M&L for finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : iii) Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture complete all as specified and directed.

M&L for providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, 1:2:4 (1 Cement : 2 coarse sand (zone-III) including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25% : 4 graded stone aggregate 20 mm nominal size including Recycled Concrete Aggregate (RCA) upto 25%)) complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Taking down copper/aluminium sub main wiring/ armoured cable any type complete, removing materials to store for keeping in safe custody or for taking credit and making good disturbed surface of walls, floors, etc. complete all as specified and directed.

M & L for point wiring with 1.5 Sqmm size, PVC insulated and unsheathed 1100 volts grade single core multistrand copper conductor FRLS cable to be drawn in and including non metallic rigid PVC conduit concealed in wall with all accessories,including suitable MS sheet metal switch box/terminal box with Hylam sheet cover 3.00mm thick for mounting fitting like switches, sockets and fan regulators etc at any height and providing one continous run of PVC insulated green colour 1.5 sq mm multi stranded copper conductor cable earth wire and connected to common earth dolly including cutting and chassing the wall as per site requirement and making good disturbed surface of walls, floors for fixing of MS sunken box in wall complete all as specified and directed for one light /fan point controlled by one way switch complete all as specified and directed.

All as per Ser item 78 above but for one 3 pin socket out let 5 Amp independent point.

All as per Ser item 78 above but with 4 sq mm size pvc insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board including one continuos run of PVC insulated green in colour 4 sqmm multistranded copper conductor earth wire connecting to earth dolly complete all as specified and directed.

Supply and fixing 5/6 Amp switch, 1 module modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. complete all as specified and directed.

All as per item No 81 above but 3 Pin 5/6A Socket outlet

All as per item No 81 above but 15/16 Amp switch, 1 module

All as per item No 81 above but 6 Pin 15/16 A socket outlet

Supplying and fixing 1/2 module (75mm x 75mm) size/modules, GI box alongwith modular base & cover plate for modular switches in recess etc. complete all as specified and directed.

Supplying and fixing 3 module (100 mm x 75 mm) size/modules, GI box alongwith modular base & cover plate for modular switches in recess etc. complete all as specified and directed.

Supplying and fixing 4 module (125mm x 75mm) size/modules, GI box alongwith modular base & cover plate for modular switches in recess etc. complete all as specified and directed.

Supplying and fixing 6 module (200mm x 75mm) size/modules, GI box alongwith modular base & cover plate for modular switches in recess etc. complete all as specified and directed.

Supplying and fixing 8 module (125mm x 125mm) size/modules, GI box alongwith modular base & cover plate for modular switches in recess etc. complete all as specified and directed.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate complete all as specified and directed.

Supply and fix in repairs Basic all purpose surface and wall mounted LED batten 20 Watt, 4 feet with aluminum housing & integrated electronic driver including pre wired and with twin core twisted flexible copper cable of suitable size and connecting the fitting from ceiling rose complete all as specified and directed.

Supply and fixing in repairs LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up from ceiling rose with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing in repairs LED Bldg security light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply and fixing in repairs 32mm dia x 2 metres long GI pipe (medium class) bracket for mounting of street light fitting on pole including bending the pipe to the required shape and providing 2 Nos 40mm x 3mm flat iron clamps with nuts, bolts and washer for fixing of bracket with pole of any height, painting the flat iron with primer and paint etc complete all as specified and directed.

M&L for dismantling of ceiling fan and painting the same with one or more coats of spray painting with synthetic enamel paint of approved brand and manufacture to give an even shade, including cleaning of surface with detergent and replacing the damaged winding, rubber reel, nuts and bolts with washers and safety pins, reinstalling the same as required including pasting soft stickers indicating MES No of 20 mm size of each letter with black synthetic enamel paint etc. complete all as specified and directed.specified and directed.

Supplying and fixing in repairs two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V, 50 Hz 1200 RPM with copper winding motor of size 300mm sweep with, blades, and frame and louvers shutters including connecting the fan with suitable size twin core copper conductor wire from ceiling rose complete all as specified and directed

Supply & fixing in repairs Air Circulator fans 230 volts single phase oscillating 450 mm sweep suitable for wall mounting including mounting the fan on wall with suitable nut botls/ fasteners and connecting the fan from ceiling rose complete all as specified and directed.

Supply and fix in repairs Single pole and neutral enclosure with and including a two pin and earth plug & socket complete with and including one single pole MCB 20/32 Amps duly flush into wall surfaces complete all as specified and directed

Supply and fixing in repairs ceiling rose 3 terminal 240 volts, 5 Amps complete all as specified and directed.

Supplying and fixing sheet metal enclosures for DB's when MCBs to be used single pole and neutral 2 way with 200 Amps rated bus bar, suitable for 250V, double door complete all as required including taking down old unserviceable DB complete all as specified and directed.

Supplying and fixing 6 way double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar din bar, inter connections, powder painted including earthing etc. as required. (But without MCB/RCCB/lsolator) including taking down old unserviceable DB complete all as specified and directed.

Supplying and fixing 8 way double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar din bar, inter connections, powder painted including earthing etc. as required. (But without MCB/RCCB/lsolator) including taking down old unserviceable DB complete all as specified and directed.

Supply and Fixing in repairs 5A to 32A rating, 240V, 10kA, "C" curve, miniature circuit breaker suitable for inductive load of single pole and neutral in the MCB DB complete with connection, testing and commissioning etc as required including taking down old unserviceable MCB complete all as specified and directed..

Supply and Fixing in repairs 5A to 32A rating, 240V, 10kA, "C" curve, miniature circuit breaker suitable for inductive load of single pole in the MCB DB complete with connection, testing and commissioning etc as required including taking down old unserviceable MCB complete all as specified and directed.

M & L for Submain wiring comprising single core, 2 Runs of 4 sqmm nominal cross sectional area multistranded FRLS copper conductor cable, PVC insulated unsheathed/surface metal 1100 Volts grade drawing in and including PVC rigid non metalic concealed conduit/surface conduit with necessary civil works for making good the disturbed surface with PVC conduits and conduit fittings complete including 1 x 4 sqmm nominal cross sectional area multistranded FRLS copper conductor cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified and directed. Note: 2 Runs of 4 sqmm cable and 1 run of 4 sqmm cable for earth wire alongwith PVC conduit shall be measured as one RM for the purpose of payment complete all as specified and directed.

Supply, laying & testing PVC insulated, PVC sheathed cable galvanized steel strip or wire armoured, electric control cables (Heavy duty) with stranded copper conductor of size 4 sq mm, 3 core, 1100 Volts grade in 20 mm conduit complete all as specified and directed.

M&L for earthing with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground earth pit not less than 2.25 m deep below ground level with top edge of the plate not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate connected to earthing test point including excavation/ earth work in any type of strata, removal of surplus excavated material, GI pipe for watering and funnel, PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 in cover slab GI funnel with GI watering pipe 20mm dia med grade, wire mesh, protection pipe 20mm dia GI pipe light grade for earth lead upto 7.50 m long complete all as specified and directed.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required including taking down old GI wire complete all as specified and directed.

Mourya Construction (BID ID -3324039)

VIRENDRA FABRICATORS (BID ID -3330448)