Providing and fixing Collaborative Conferencing Solution in

Amount

1.1 kV grade 2 Noss. (P+N) copper conductor wires of area 4.0 sq mm and 1Nos. (E) 2.5 sq. mm copper wire for 15 /16 Amp single phase switch.

IP 42 Wall/column Mounted distribution board with one Nos of DP 16/32A MCB as incomer and 2 Noss 6A/10A SP MCB as outgoing (8 way SPN DB)

ELCB with 100mA Sensitivity 40Amp. 4Pole

Submains-FRLSZH-medium PVC conduit- 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire in 20mm Conduit

Light /Fan / Ex. fan Points Concealed Manner with Modular switches & FR wires

3/5 Pin Independent Plug (IP) Concealed Manner with Modular switches & FR wires

5A/6A - 3/5 Half Plug Concealed Manner with Modular switches & FR wires

Laying of PVC Empty Conduit with Boxes for Light /Fan / Ex. fan Points for concealed point wiring

Laying of pvc Empty Conduit with Boxes for Independent Plug for concealed point wiring

15 / 5 A / 6 A Combined Power Plug Socket Point with Fuse, Indicating Lamp and one 15 Amp SP Switch

INDOOR LED FIXTURES -Downlighter/Wall mounted LED 13-18 W

Switch BOX point for computers through PVC Conduit Description of Item 8Modular SURFACE BOX - 1 No. 8Modular PLATE - 1 No. INDICATOR LAMP - 1 No. 15A SWITCH - 1 No. 6A 5 PIN SOCKET - 3 Nos. 2Modular SURFACE BOX - 1 Nos. 2M PLATE - 1Nos. RJ11 SOCKET - 1 Nos. RJ45 SOCKET - 1Nos.

Cat 6 Gigabyte

Collaborative conferencing soution: Intractive Flat panel of 65" with OPS floor stand ,5x optical Zoom PTZ VC Camera ,wireless omnidirectional microphone cum speaker phone.

Providing and fixing of floor tiles and wall tiles with sand, cement and labour.

Providing and installing crystalline waterproofing treatment to inside surfaces of the water retaining structures

Extra rate for removing brick bat coba more than (4") 100 mm thick including carting away the same and from the actual place of work to any other site and making the site clear as directed. The debris will become contractor's property.

Providing and laying polished natural stone strips upto 100mm wide as specified below (Machine cut) 25-30 mm. thick of an approved quality and size for paving /flooring including cement mortar bedding of 25 mm thick in 1:4 proportion, cement float, machine cutting, dressing, leveling, jointing, filling the joints with neat cement slurry or with required pigment, machine polishing at site, curing, finishing, etc complete as directed by Engineer In Charge. 18 mm thk. Lakha Red Granite tiles/slab

18 mm thk. Lakha Red Granite tiles/slab

Providing and applying 12 mm thick internal plaster in cement mortar 1:3 with neeru finish at all heights and locations in one coat for masonry (except stone masonry) and concrete surfaces including racking out joints, hacking of concrete surface, watering, finishing, curing, scaffolding etc. complete.

Providing and fixing of Modular table with fixed pedestal having 2 book drawers and 1 file drawer. Table top shall be made of 25mm thick Marine ply (IS 710 : 2010) , FIRE RETARDENT laminate on all sides / surfaces.Sides in 25mm Marine ply (IS 710 : 2010). All boards components like top, sides etc. are finished with 2mm thick machine pressed PVC edge banding in matching colour. (Rehau Make/or Equivalent)for better impact resistance. Other components like modesty panels of 600mm height (apron) shall be made of 18mm thick Marine ply (IS 710 : 2010) in approved colour and shade as per pre-approved sample etc. complete. 2400 X 900 X 750

Providing and positioning bunk bed made out of approved colour, powder coated, M.S. (IS 513:2008) pipe frame and angle supports. Two end frames shall be made out of 16guage and 40 mm dia M.S pipes as vertical supports and 16 guage 25 mm dia M.S pipes along with 40 x 40 x 6 mm M.S angle lateral frame to recieve 12mm thk marine grade ply base for 100 mm thk ,100 density coir mattress etc. complete. Edges of the base ply shall be sealed with 6mm thk T.Wlipping. Two nos of 25 mm dia 16 guage pipe supports shallbe provided to support both the base ply and ladder and withnecessary Nylon bushers for pipe ends touching to floor and with approved colour powder coating and complete as per the instructions of the Architect or Engineer in charge. Note: This item shall be made in knock down type of arrangement.

Providing and fixing best quality C.P. Teak wood frame for doors, windows and ventilators size greater than 50mm x 50mm including intermittent supports if required, all moulding, rebating, jointing, hold nfasts of MS flats of minimum size 25 x 3 mm, having length of 225mm for doors & 150 mm for windows and finishing with 3 coats of French polish or one coat of primer and synthetic enamel paint in two coats as directed etc. complete as directed.

Providing and supplying Modular CUPBOARD made up of required size. Top made of 25mm Marine ply (IS 710 : 2010), having post formed decorative laminate of 0.8mm on top and FIRE RETARDENT laminate on all sides / surfaces etc.complete. Sides, Sides in 25mm thk Marine ply (IS 710 : 2010). Adjustable shelf made in 25mm thk Marine ply (IS 710 : 2010) placed on standard shelf pins etc.complete.Storage Back made of 9mm thick Marine ply (IS 710 : 2010)etc. Sides, Shutters, Bottom, adjustable shelf, finished 2mm thickmachine pressed PVC Edge banding of required size etc. Hardware set to include 110 degree opening self- closing box hinges,Counter Sunk screw, S.S.Brush Finished, Handles L’ Clips Selves support etc. complete. Multipurpose lock, Levelling Bolt with insertsetc. complete. Aluminium furniture feet – Round tube, diameter 40mm with 100 mm height with suitable finish to match handles’'Shape SS Brush finished handles as indicated in the drawing,suitable locking provision etc. complete.

P&F in position Gypsum board false ceiling with 12.5mm th. Gypsum boards, screwed/ fixed to the under struct of suspended G.I. Grid const& suspended from the main ceiling of ceiling sectn at max c to c distance of 450 mm perimeter channel and intermediate channels at max c to c distance 1200 mm galvanised grid should be fixed to RF CC slab.The gypsum board should be fixed to galvanised iron grid with necessary screws.The boards should be taped and filled from underside to give smooth, seamless ceiling.The rate should include necessary additional ceiling sections and intermediate channels to be provided at openings for light fixtures, asbestos cement ducts, vertical drops, offsets etc. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 mm item to be comp in all respect.(G.I. perimeter channel size-27mmx0.5mm thk.,flange-20mm &30mm,intermediate channel. size-45mm & 0.9mm thk., hanger size-25mmx0.5mm thk.)complete.

Painting of ceiling, beam & walls

P/F Jaguar make shower , necessary accessories shower arm with flange continental series sr.no.483

Providing and fixing JAQUAR NAKE, ORNAMIX Model No. 10011 single lever Basin Mixer without POPUP waste with 450mm long copper pipes & brass nuts etc complete

32 mm dia ,Semi rigid pipe

40 mm dia

Flexible pipe

40 mm dia

P/F white wall hung WC hindware with necessary cantilever/chair bracket with nut bolt etc. complete directed by EIC..(White color Wall Hung EWC Model No. 20024 OR consider equivalent make

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357mm

PATIL ELECTRICAL (BID ID -6309513)

CHAITRA ELECTRICALS AND ENGINEERING (BID ID -6320111)