Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.2 LAccepted-AOC | ₹2.2 L | L1 | Accepted-AOC L1 |
| 2 | L2₹2.3 LRejected-Finance | ₹2.3 L | L2 | Rejected-Finance L2 |
| 3 | L3₹2.4 LRejected-Finance | ₹2.4 L | L3 | Rejected-Finance L3 |
| Sl No | Description | Qty | Unit | MOHIDEEN ENTERPRISES L1 | V NARAYANAN L2 | N VENKATESH M/S THIRUPPATHI ENGINEERING WORKS L3 |
|---|---|---|---|---|---|---|
| 1.00 | Dismantling the existing floor ceramic tiles laid in cement mortar and removing the debris away from the site including cost of all lead lift etc complete. | 61.5 | sqm | 6,150 ₹7,257 | 6,642 ₹7,837.56 | 4,243.5 ₹5,007.33 Lowest |
| 2.00 | Flooring with approved virtified of non slippery type tiles over cement mortor 1:3 20mm thick including pointing with white cement finishing the joints flush pointing the surface etc complete( sample to be approved by Dept.Engineer) | 74 | sqm | 74,000 ₹87,320 Lowest | 92,500 ₹1,09,150 | 1,06,930 ₹1,26,177.4 |
| 3.00 | Painting the inside walls with two coats of best quality interior emulsion of approved colour over a interior primer coat of all materials, etc., complete. | 100 | sqm | 17,500 ₹20,650 | 17,100 ₹20,178 Lowest | 18,900 ₹22,302 |
| 4.00 | Provinding UPVC (un-plasticized polyvinyl chloride) door: providing and fixing casesment doors fabricated from un- plssticized polyvinyl chloride (uPVC) sections. Profiles : The profiles should be three chamber system which provides high insulation properties with outer frame 60mmx55mm with an outer wall thickness of 2.4mm.The window uit should be designed with all corners joints mitred and fusion welded. windws should be steel reinforced with 25x24x25 mm steel reinforcement with a thickness of 1mm to have dimensional sability. The sash should be of 60x102mm. The mullion should be of 60x74mm.The profiles should be have co-extruded seals. HJardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The Handles, locks shgould be designed so that they cannot be relesases from outside. Glazing: The window system should be glazed with 5mm plain float glass/6mm bison lam. Installation: The Profiles should be cut ti length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electropated screws into plug. | 3 | sqm | 25,500 ₹30,090 | 19,500 ₹23,010 Lowest | 25,179 ₹29,711.22 |
| 5.00 | Providing and fixing sanitary fitting consisting of European Water Closet with “P” or “S” Trap with Double Flapped Seat and Seat Cover with Brass Hinges and 10 litre capacity PVC Low Level Flusing Tank with all internal fittings fixing with all internal fittings, and giving connection to sewer line, dismantling of existing damaged Indian type white closet , Cleaning Manhole , Removing old sanitary pipe lines and cleaning the debris away from the sie, including cost of all materials, lead, lift, etc.,complete | 1 | no | 6,000 ₹7,080 | 8,500 ₹10,030 | 5,909 ₹6,972.62 Lowest |
| 6.00 | Supplying ,laying and fixing in position of PVC Superthick 32mm dia pipe of best quality from approved manufacturer confirming to IS 4985-1968, 4984-1970 including cutting threading joining with necessary PVC specials and PVC tap including cost of all materials lead lift labour etc complete. as directed by department Engineer at site | 40 | RM | 12,320 ₹14,537.6 | 9,600 ₹11,328 | 8,400 ₹9,912 Lowest |
| 7.00 | Supplying and installation of 800 VA UPS of reputed make with 150 Ah Tubular battery of Exide make including the cost of installation of the inverter in a suitable place, modifying the wiring system in the SE Chamber etc complete, including cost of all materials, installation, wiring, etc complete. | 1 | set | 30,000 ₹35,400 | 30,000 ₹35,400 | 20,000 ₹23,600 Lowest |
| 8.00 | Supply and fixing of wall mounting fan of 300mm sweep including cost of all labour, lead, lift etc complete. | 3 | no | 8,400 ₹9,912 | 7,800 ₹9,204 | 7,500 ₹8,850 Lowest |
| 9.00 | Supply and fixing of floor standing 400mm high speed pedestal fan including cost of all labour, lead, lift etc complete. | 1 | Nos | 3,000 ₹3,540 | 1,500 ₹1,770 Lowest | 2,670 ₹3,150.6 |
| 10.00 | Supply and fixing of Light duty AC exhaust fan 300 mm sweep including cost of all labour, lead, lift etc complete. | 1 | no | 1,700 ₹2,006 | 2,500 ₹2,950 | 1,389 ₹1,639.02 Lowest |
Tender Value
Refer Docs
EMD Value
₹2,340
Closing Date
6 Feb 2026, 2:00 pmClosed
SE/REDC/RMD
O/o SE/REDC/RMD
Improvement work of replacing the old damaged ceramic tiles with new vitrified tiles, replacement of the water closet and plumbing lines in the toilet, supply and installation of new Inverter with battery in the SE Chamber, REDC, Ramnad
2026_EB_645538_1
030/25-26
Open Tender
Civil Works
Works
Ramanathapuram
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹2,340
Yes
25 Aug 2026
22 Jan 2026
7 Feb 2026
22 Jan 2026
6 Feb 2026
22 Jan 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling the existing floor ceramic tiles laid in cement mortar and removing the debris away from the site including cost of all lead lift etc complete. | 61.5 | sqm | - | - |
| 2 | Flooring with approved virtified of non slippery type tiles over cement mortor 1:3 20mm thick including pointing with white cement finishing the joints flush pointing the surface etc complete( sample to be approved by Dept.Engineer) | 74 | sqm | - | - |
| 3 | Painting the inside walls with two coats of best quality interior emulsion of approved colour over a interior primer coat of all materials, etc., complete. | 100 | sqm | - | - |
| 4 | Provinding UPVC (un-plasticized polyvinyl chloride) door: providing and fixing casesment doors fabricated from un- plssticized polyvinyl chloride (uPVC) sections. Profiles : The profiles should be three chamber system which provides high insulation properties with outer frame 60mmx55mm with an outer wall thickness of 2.4mm.The window uit should be designed with all corners joints mitred and fusion welded. windws should be steel reinforced with 25x24x25 mm steel reinforcement with a thickness of 1mm to have dimensional sability. The sash should be of 60x102mm. The mullion should be of 60x74mm.The profiles should be have co-extruded seals. HJardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The Handles, locks shgould be designed so that they cannot be relesases from outside. Glazing: The window system should be glazed with 5mm plain float glass/6mm bison lam. Installation: The Profiles should be cut ti length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electropated screws into plug. | 3 | sqm | - | - |
| 5 | Providing and fixing sanitary fitting consisting of European Water Closet with “P” or “S” Trap with Double Flapped Seat and Seat Cover with Brass Hinges and 10 litre capacity PVC Low Level Flusing Tank with all internal fittings fixing with all internal fittings, and giving connection to sewer line, dismantling of existing damaged Indian type white closet , Cleaning Manhole , Removing old sanitary pipe lines and cleaning the debris away from the sie, including cost of all materials, lead, lift, etc.,complete | 1 | no | - | - |
| 6 | Supplying ,laying and fixing in position of PVC Superthick 32mm dia pipe of best quality from approved manufacturer confirming to IS 4985-1968, 4984-1970 including cutting threading joining with necessary PVC specials and PVC tap including cost of all materials lead lift labour etc complete. as directed by department Engineer at site | 40 | RM | - | - |
| 7 | Supplying and installation of 800 VA UPS of reputed make with 150 Ah Tubular battery of Exide make including the cost of installation of the inverter in a suitable place, modifying the wiring system in the SE Chamber etc complete, including cost of all materials, installation, wiring, etc complete. | 1 | set | - | - |
| 8 | Supply and fixing of wall mounting fan of 300mm sweep including cost of all labour, lead, lift etc complete. | 3 | no | - | - |
| 9 | Supply and fixing of floor standing 400mm high speed pedestal fan including cost of all labour, lead, lift etc complete. | 1 | Nos | - | - |
| 10 | Supply and fixing of Light duty AC exhaust fan 300 mm sweep including cost of all labour, lead, lift etc complete. | 1 | no | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.16 MB
030SECHAMBERTECH.pdf
Tender Documents • 0.76 MB
BOQ_773618.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].