Widening and strengthening work with paved shoulder from chain 17.100 to 31.100 of Saharanpur Nagal Sidki Jhabreda road in the financial year 2024-25 in Saharanpur district

Amount

Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m complete in all respects but excluding GST

Dimantling brick work or stone work in lime or cement mortar and including stacking of materials as directed be the Engineer-in-charge within a distance of 60 meter (200 feet). complete excluding GST. SI. No. 692

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2. complete excluding GST.

Mechanically compacted to achieve 95% proctors density including arrangement of water, settlement and all T&P including roller and its fuel etc complete excluding GST.(SI No 260)

Construction of granular sub-base by providing grading -1 material in uniform layers with motor grader on prepared surface by mix in place method with rotavator at OMC, & compecting with vibratory roller to achieve the desired density, complete as per Clause 401 complete in all respects but excluding GST

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. (W.M.M.) complete in all respects but excluding GST

Providing, laying, spreading and graded stone aggregate (WMM) after mixing with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying with 1% OPC cement and 3.5% Emulsion in uniform layers on sub base / subgrade and compacting with the road roller to achieve the desired density. (E.T.A) complete in all respects but excluding GST

Providing & laying Dense graded Bituminious macadam with100-120TPH batch HMP producing an average output of 75 tonne per hour using crushed aggregates of specified grading, premix with bituminous binder (Bitumen VG-40) @ 4.5 Per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, lever and alignment, rolling with smooth wheeled vibratory and tandom roller to achieve the desired compaction as per MORTH Specification clause 507 Complete in all respects inculding all material (Grade-II) complete in all respects but excluding GST

Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. (Grade-I) complete in all respects but excluding GST

Providing & applying Tack coat with V.G.-10 on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.20kg/Sqm. On the prepared Bitumen/ granular surface clieaned with mechanical broom. complete in all respects but excluding GST

Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder (Bitumen VG-40) @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects but excluding GST

Cement Concrete with 4 cm gauge approved stone grit, coarse sand & cement in the proportion of 6:3:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. S.I. NO. 279(b) complete in all respects but excluding GST

R.C.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions for slabs in 1:1.5:3. excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid extra. complete in all respects but excluding GST SI. No. 284 (a)

R.C.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:2;4 in lintels of door & windows excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid extra complete excluding GST. (SI. No. 283)

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. And make as approved by Eng-in-charge. As per MORTH specifications clauses 1600 complete in all respects but excluding GST

Providing and laying boulder apron for bed protection with stone boulders of minimum size and weight as per Table 1300.1, no fragment weighing less than 25 kg laid dry complete as per drawing and technical specifications clause 1301.

Supply & fixing of NP-3 class 450 mm dia RCC hume pipe (ISI mark) of following diameters including carriage, loading, unloading at site also including cost of hume pipes & collars & all taxes including laying in proper position & joint filling including cost of necessary jute & cement for proper completion of the work complete in all respects but excluding GST

Supply & fixing of NP-3 class 600 mm dia RCC hume pipe (ISI mark) of following diameters including carriage, loading, unloading at site also including cost of hume pipes & collars & all taxes including laying in proper position & joint filling including cost of necessary jute & cement for proper completion of the work complete in all respects but excluding GST

Supply & fixing of NP-3 class 1200 mm dia RCC hume pipe (ISI mark) of following diameters including carriage, loading, unloading at site also including cost of hume pipes & collars & all taxes including laying in proper position & joint filling including cost of necessary jute & cement for proper completion of the work complete in all respects but excluding GST

(a) Sand filling in plinth and under floor including supply of necessary quantity of sand from a distance not exceeding 8 Kms. from the site of work and including watering, dressing etc. labour and T&P etc. required for proper complition of the work. saplings of girth upto 30 cms. measured at a height of 1 M. above ground level and removal of rubbish upto a distance of 50 M. out side the periphery of area cleared. including cost of sand. S.I. No.255

M-150 Brick on edge pavement on parties with bricks, laid dry joints filled with local sand including preparation of base to proper slope, and its ramming, spreading layer of 1 cm. (3/8") depth of local sand over the subgrade and including supply of all materials, labour Tools &plants etc. required for proper completion of the work. S.I. No. 763

(B) M-150 Brick Work in 1:3 (One cement & Three Corse sand) mortar in foundation and plinth including supply of all materials labour, Tools & plants etc. required for proper complete in all respects but excluding GST. (SI. No. 307) complete in all respects but excluding GST

Struck pointing with cement mortar consisting of 1 part cement and 2 parts of fine sand of 1.25 Fineness modulus. required for proper complete in all respects but excluding GST. (SI. No. 574 )

12 mm thick plaster with cement and fine sand of 1.25 fineness modules mortar in 1:3. including supply of all materials, labour, tools & plants etc. required for proper complete in all respects but excluding GST. (SI. No. 282 )

Cement Concrete with 2 cm gauge approved stone grit, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. required for proper complete in all respects but excluding GST. (SI. No. 279 a )

Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8, fixing in position including painting and printing etc. Ordinary kilometer stone (precast) as per MoRTH specification clause No. 804 complete excluding GST.

Reinforced cement concrete M15 grade Hectometre stone of standard design as per IRC:8, fixing in position including painting and printing etc.Hectometer stone (precast) as per MoRTH specification clause No. 804 complete excluding GST.

GSR Infratech pvt ltd (BID ID -5144656)

Raja Infraconstruction Pvt Ltd (BID ID -5143530)