works for effecting services in various schemes in Ethirmedu section in Sankari division

Amount

Work contract schedule

Excavation of pole pit upto 27" (8.0 m) Pole by using JCB

Excavation of pole pit for 30' RCC Pole/9.00m PSC Pole by using JCB or manual

Stay pit 4.5' to 5' depth by using JCB or manual

Erection of PSC/RCC poles upto 8.00m. (27' ) by using Crane or manual

Erection of PSC/RCC poles upto 9.14m.( 30' ) by using Crane or maual

Erection of stay set complete

Fixing of HT "V" cross arms(all types) / channel cross arms/ guarding Cross arms

Fixing of LT 3 phase cross arms

Fixing of LT Single phase cross arms

Fixing of HT/LT TI Fittings

ii) Fixing of HT pin Insulators 22 KV

Fixing of HT 22 KV strain disc.

i) Fixing of LT pin Insulator

ii) Fixing of LT shackle

iii) Fixing of Aluminium Knob

Paving and Stringing of 7/4.09 mm ACSR

Paving and Stringing of 7/3.35 mm ACSR 7/3.0 mm AAAC

Paving and stringing of 7/2.59 mm/ ACSR 7/2.11 mm ACSR

ERECTION of Single Pole TRANSFORMER STRUCTURE COMPLETE inclusive of following works - Excavation of pole pits sizing 2' X 2' X 6', erection of poles, erection of base plate, erection of structure materials , erection of AB switch and HG Fuse, Structure Earthing complete , Pole concreting (2'x2'6') for both base and sleeve including supply of jelly, sand and cement by the contractor , plinth erection with plastering ratio 1:2 including supply of cement and sand , Fixing of Open Type fuse units, HT/LT LAS fixing and LAS earthing through PVC Pipe 0.5" , Provision of bus-bar arrangement, Erection of Stay Set complete, Jumpering, erection of support angles and insulators if any , Alteration of materials in lathe works if any, provision of danger board, 3 Nos Earth pits including erection of cement collar , painting of metal parts, including loading, unloading, transportation of all required materials from stores to site , Road site to pit spot as per the directions by the TANGEDCO Site Engineer (This includes labour for loading, unloading, transporting and rent for crane lorry, all T&P suchas crowbars, siling, DShackle etc., that must be brought

ERECTION of Double Pole TRANSFORMER STRUCTURE COMPLETE inclusive of following works - Excavation of pole pits sizing 2' X 2' X 6', erection of poles, erection of base plate, erection of structure materials , erection of AB switch and HG Fuse, Structure Earthing complete , Pole concreting (2'x2'6') for both base and sleeve including supply of jelly, sand and cement by the contractor , plinth erection with plastering ratio 1:2 including supply of cement and sand , Fixing of Open Type fuse units, HT/LT LAS fixing and LAS earthing through PVC Pipe 0.5" , Provision of bus-bar arrangement, Erection of Stay Set complete, Jumpering, erection of support angles and insulators if any , Alteration of materials in lathe works if any, provision of danger board, 3 Nos Earth pits including erection of cement collar , painting of metal parts, including loading, unloading, transportation of all required materials from stores to site , Road site to pit spot as per the directions by the TANGEDCO Site Engineer (This includes labour for loading, unloading, transporting and rent for crane lorry, all T&P suchas crowbars, siling, DShackle etc., that must be brought

Transport of Materials. Below 8 Kms.

Loading & Unloading of line materials

Loading of pole 9.14m & 9.00 Mtr (RCC&PSC Poles)

Unloading of pole 9.14m & 9.00 Mtr (RCC&PSC Poles)

Loading of pole 7.5/8.0m (RCC &PSC Poles)

Unloading of pole 7.5/8.0m (RCC &PSC Poles)

Transportation of Poles from road side to pole Pit up to1.0 KM 7.5/8.0m (RCC &PSC Poles)

Transportation of Poles from road side to pole Pit up to1.0 KM 9.14m & 9.00 Mtr (RCC&PSC Poles)

Dismandling of RCC/PSG pole 8.0mtr/7.5mtr

Dismandling of 'V' X arm,channel X arm,guarding X arm(all types)

Dismandling of LT 3 phase X arm

Dismandling of LT single phase X arm

Dismandling of HT/LT TI fitting

Dismandling of 11KV strain disc

Dismandling of 22KV pin insulator

Dismandling of LT shackle

Dismandling of LT pin insulator

Dismandling of Aluminium knob

Dismandling of ACSR 7/3.35mm conductor

Dismandling of ACSR 7/2.59mm/ 7/2.11mm conductor

E.P.F. @13 % should be Entered by the Bidder

E.S.I. @ 3.25 % should be Entered by the Bidder

G.S.T. @18% should be Entered by the Bidder