WBPWD/SEWEC /AED /NIQ-76 /2024-25

Amount

HTPN,SPN, MAIN SWITCHES & other related items

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.8 way Incoming-415V, 10KA, 125 A,4 pole MCCB ----1 no ,Outgoing- 415V, 10KA, 63A T.P MCB C curve ---8.(make: Legrand/Schneider/Siemens)(D11/15+D6/7)

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provisionfor earthing attachment 4 way Legrand with MCB as per GS(D10/14)

Supplying & fixing 250V,6-10A per way , SPN MCBDB with SS enclosure double door with IP42/43 protection with DP isolators as incomer and SPMCBs ( 'C' Curve , 10kA ) as outgoing ,concealed in wall after cutting the wall & mending good the damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (Make-Legrand/Schneider/Siemens ),2+12 way Enclosure (607712) (D9/13)

Supplying and fixing 240 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.[D-6/7] a)6-32 A SP MCB (Make-Legrand/Siemens/Schneider)

b)63A FP MCB (Make-Legrand/Siemens/Schneider)

c) 40 A D.P.MCB ( Make-L&T / Siemens/Crabtree)

Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. 63A (Legrand/Schnider/L&T/Standard)(D3/4a)

Supplying and fixing 415V, TPN on load front operated Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc. 200A(L&T/Havells/Standard)(D3/4a)

Supplying and fixing 415V, TPN on load front operated Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc. 415A(L&T/Havells/Standard)(D3/4a)

Supply 1.1 kv grade 4 core 95 sq.mm XLPE/PVC insulated and sheathed, armoured cable with Al.conductor (HAVELLS/POLYCAB/ GLOSTER/R R KABEL/Mescab) in following manner as to GS.(Analysis enclosed)

a)Laying of one No. cable above 35 sqmm and upto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed.(F2/1b)

Supply1.1 kv grade 4 core 240sq.mm XLPE/PVC insulated and sheathed, armoured cable with Al.conductor (HAVELLS/POLYCAB/ GLOSTER/R R KABEL/Mescab) in following manner as to GS.(Analysis enclosed)

a)Laying of one No. cable above 35 sqmm and upto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed.(F2/1b)

Supply 1.1 kv grade 4 core 70sq.mm XLPE/PVC insulated and sheathed, armoured cable with Al.conductor (HAVELLS/POLYCAB/ GLOSTER/R R KABEL/Mescab) in following manner as per GS.(From Sub panel to VTPNl)(Analysis enclosed)

Laying of one No. cable above 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed(F2/1b)

Finishing of the XLPE/PVC insulated armoured cable ends by soldering with cable sockets and insulated tapes etc., including supplying sockets, soldering materials, tapes etc. and making connection to switch, BDB and BBC etc.(F5/8b) For 4 core240sqmm

Finishing of the XLPE/PVC insulated armoured cable ends by soldering with cable sockets and insulated tapes etc., including supplying sockets, soldering materials, tapes etc. and making connection to switch, BDB and BBC etc.(F5/8b) For 4 core95sqmm

Finishing of the XLPE/PVC insulated armoured cable ends by soldering with cable sockets and insulated tapes etc., including supplying sockets, soldering materials, tapes etc. and making connection to switch, BDB and BBC etc.(F5/8b) For 4 core70sqmm

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. [E-14/1].

a)4 X 10sqmm. + 2 X 6sqmm.

b)2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC

c) 2 X 4sqmm. + 1 X 2.5sqmm.

d) 2 X 2.5sqmm. + 1 X 1.5sqmm.

e) 3x 22/0.3(1.5sqmm.)

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works.25mm size [E-16 /7b]

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Gloster/Finolex/Polycab) for ECC in 19 mm bore, 3 mm thick polythene pipe complete with all accessories embedded in wall for horizontal & vertical runs and in suitable size PVC casing-capping (Precision make) for ceiling portion only, incl. necy. PVC clips, fittings etc. to light/fan/call bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works [only PVC casing-capping on ceiling and remaining portion concealed] (Avg. run 6 Mtr.) [E-13/9(c)].

Average run 8mtr

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by E.I.C) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC (On Board) [E-10/4(a)i].

Supply & Fixing 240 V, 2 nos. 6A, plug socket with separate 2 nos. 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. (5A. Separate plug)(for each Bed Room, kitchen,drawing room) [E-4/11(b) + E-5/13(b) +E-5/14(a) + E-5/15(a)]

Supply & Fixing 240 V, 16/20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required (For power point)[ E-6/22]

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.( for AC) [E-17/5(a)]

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc(E 19/17).

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required(E7/26)

E.Fittings & Fixtures and Earthing installation

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.[E-6/18(a)]

S & Fixing exhaust fan, Louver shutter after making hole in wall and mending good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of dia as follows (make: EPC Heavy duty) a) 9"exhaust Fan 230mm (1370RPM)(Analysis Enclosed)

b)12" exhaust Fan

S&F of required size solderless Cu socket of following Cu wires.(F5/9) a) 6sq mm

b) 4sq mm

c)2.5Sqmm

d) 1.5 sqmm

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe.[G-1/2(a)]

Excavation of morrum soil [G-1/1(b)]

S&F 25A A.C machine plug top(Make-Legrand/Anchor/Havels)(E17/5b)

S&F of 250V Digital Single timer DB(equivalent to 2+8 way SPNDB in size) with 16 SWG M S sheet enclosure on angle iron frame on wall comprising of the following accessories incl interconnection by suitable size cu wire as required:- ( i )MNX 25 four Pole Power contactor with 240V Coil-1 No. ( ii )240V, 24 Hr. one dial timer (Mk. GIC, Cat No. T2DDT7) - 1 No. ( iii) LED Lamp (Red & Green)(Mk. Siemens)-1 Nos. (iv )25 A DP MCB (Mk. Legrend) - 1 No. (vi) 2 way bakelite base terminal block 32 A capacity -- 1 No

S&F of 250V Digital Double timer DB(equivalent to 2+8 way SPNDB in size) with 16 SWG M S sheet enclosure on angle iron frame on wall comprising of the following accessories incl interconnection by suitable size cu wire as required:- ( i )MNX 25 four Pole Power contactor with 240V Coil-2 No. ( ii )240V, 24 Hr. one dial timer (Mk. GIC, Cat No. T2DDT7) - 1 No. ( iii) LED Lamp (Red & Green)(Mk. Siemens)-1 Nos. (iv )25 A DP MCB (Mk. Legrend) - 1 No. (v) 32A Toggle switch - 1 No. (vi) 2 way bakelite base terminal block 32 A capacity -- 1 No

Dismantling existing damaged & unservicecable electrical installation with owns tools & takles incl. Mending good damages as per GS and clearing/removing from the site.(Analysis Enclosed)

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required (G2/4a)

SASTIK ENTERPRISE (BID ID -5624171)

SREE GURU ENGINEERING (BID ID -5620935)