WCT FOR EREC,DISM, TRANS OF POLES, DT,HT/LT LINES AND OTHER EXTENSION WORKS IN ANTHIYUR SUB DIVISION

Amount

Excavation of pole pit upto 27" (8.0 m) Pole by using JCB or manual

Excavation of stay pit 4.5' to 5' depth by using JCB or manual

Excavation of pole pit upto 9.14 mtr Pole by using JCB or manual

Excavation of RSJ pole pit above 36' by using JCB or manual

Excavation of pole/stay pit hard rock requires blasting

Excavation of poles /stay pit hard rock without blasting (where houses are located)

Erection of RCC poles/Metal poles upto 8.00m. (27') by using JCB or manual

Dismantling of RCC poles/Metal poles upto 8.00m. (27') by using JCB or manual

Erection of RCC poles/Metal poles upto 9.14m.(30') by using JCB or maual

Dismantling of RCC poles/Metal poles upto 9.14m.(30') by using JCB or maual

Erection of RSJ joists, fabricated poles above 30'-0" (9.14 m) by using JCB or manual.

Dismantling of RSJ joists, fabricated poles above 30'-0" (9.14 m) by using JCB or manual.

Erection of RSJ joists, fabricated poles above 36'-0' by using JCB or maual

Dismantling of RSJ joists, fabricated poles above 36'-0' by using JCB or maual

Erection of stay set complete

Fixing of HT "V" cross arms(all types) / channel cross arms/guarding Cross arms

Dismantling of HT "V" cross arms(all types) / channel cross arms/guarding Cross arms

Fixing of LT 3 phase cross arms

Dismantling of LT 3 phase cross arms

Fixing of LT Single phase cross arms

Dismantling of LT Single phase cross arms

Fixing of HT/LT TI Fittings

Dismantling of HT/LT TI Fittings

Fixing of HT pin Insulators 22 KV

Dismantling of HT pin Insulators 22 KV

Fixing of HT 22 KV strain disc.

Dismantling of HT 22 KV strain disc.

Fixing of LT pin Insulator

Dismantling of LT pin Insulator

Fixing of LT shackle

Dismantling of LT shackle

Fixing of Aluminium Knob

Dismantling of Aluminium Knob

Fixing of Guarding Cross arm

Fixing of Tapping Channel Cross arm

Earthing of pole with pin including burying looping and binding.

Paving of conductor,stringing etc.. Complete with 7/4.09 mm ACSR conductor.

Dismantling of conductor,stringing etc.. Complete with 7/4.09 mm ACSR conductor.

Paving of conductor,stringing etc. complete with 7/3.35 mm ACSR 7/3.0 mm AAAC.

Dismantling of conductor,stringing etc. complete with 7/3.35 mm ACSR 7/3.0 mm AAAC.

Paving of conductor ,stringing etc.complete with 7/2.59 mm ACSR 7/2.11 mm ACSR

Dismantling of conductor ,stringing etc.complete with 7/2.59 mm ACSR 7/2.11 mm ACSR.

Mass concreting including materials (Cement 1/2 bag + river sand and Blue metals and watering).

Sleeve concreting including materials (Cement 1/2 bag + river sand and Blue metals and watering).

Erection of Transformer structure complete in all respects with wiring Earthing, fixing of open type fuse units, HT/LT/LAS and jumpering 3 Nos. Earth pits with tubs including painting of metal parts, structure poles, fixing of top channel seating channel, belting angle (Except erection of Transformer)

Transporting of Distribution Transformers/Meteringsets by using private vehicle other than bullock cart up to 30 Km.

Transporting of Distribution Transformers/Metering sets by using private vehicle other than bullock cart above 30 Km

Transport of poles/Materials/ conductors and other materials (excluding loading and unloading charges.)below 8 Kms

Transport of poles/Materials/ conductors and other materials (excluding loading and unloading charges.)above 8 KM for additional KM.

Loading of poles upto 27'-0"

Loading of poles upto 30'-0"/RSJ Pole

Un loading of poles upto 27'-0"

Un loading of poles upto 30'-0"/RSJ Pole

Transporting of poles from road site to pole pit including loading and unloading of poles by using JCB or manual up to 100 m

Transporting of poles from road site to pole pit including loading and unloading of poles by using JCB or manual beyond 100 m

Loading or unloading of Transformer upto 200 KVA for each

Erection of New Transformer upto 200 KVA

Dismanting of of New Transformer upto 200 KVA

Re-sagging (HT) 7/4.09mm

Re-sagging (HT)7/3.35mm

Re-sagging (HT) 7/2.59mm

Erection of street light including fixure fitting

Dismantling of street light including fixure fitting

Erection of street light service

Releasing of grills from RCC Poles

Releasing of single phase service and re-fixing.

Releasing of 3 phase service and (upto 50 HP) re-fixing.

Erection of D.P. structure with AB switch top channel, cross brancing, HG fuse set, earthing painting earthing painting, providing stay and pole concreting

Erection of New 10' Earth pipe replacing the carroded earth pipe and renewal of earthing including burying looping and binding.

Releasing of ACSR/AAAC conductors from conductor drum and coiling ACSR 7/3.35, 7/2.59, AAAC 7/2.50, 7/3.15 MM (Per/Km.)

Drilling of hole in channel only 3/4" & 1" per hole

Cutting of flat

Cutting of channel

Cutting of Angle

Cutting of pipe