81009Adn Altn

Amount

Dismantling floor, hearth or wall tiling including CM bedding, removing rubbish off the premises complete all as specified and as directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons, riser of steps, skirting, dado etc laid in any mortar complete all as specified.

Demolition of cement concrete un-reinforced in any position and paving not exc 15cm thick above or below ground level complete all as specified and as directed.

M&L coloured non skid ceramic tiles 7mm to 8mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white/ coloured cement, laid over and including cement screed bed 15mm thick in cement mortar 1:6, complete all as specified.

Ditto all as per item No 04 above but as in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:4, complete all as specified.

M & L PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) 25mm thick as in levelling course, sub-floors and paving etc complete all as specified.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:6) bedding complete all as specified

M&L for glazed ceramic designed coloured tiles as in vertical surfaces of size 300x450x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match designed incl 10 mm thick backing coat in CM (1:4) complete all as specified.

M&L 18-20mm thick granite stone (of any type ) work (table rubbed and polished) in cooking platform, window cill/jambs etc laid bedded over 15mm thick CM (1:4) bedding & pointed in white/coloured cement to match coloured tiles including grinding and mirror polishing complete. Note : Colour of granite shall be as approved by Engr-In-Charge.

Dismantling of ceiling boarding including grid of any description fixed in any position with nails

S&F anodised aluminium powder coated snap grid frame work of size 605mm x 605mm for ceiling using aluminium anodised sections specified in SSR Part-I 1991 incl cutting, drilling jointing etc complete incl 400 dia of GI hangers wire suspenders fixed with adjustable connectors and providing 6mm thick non-asbestos fibre boards (Classic) 605mm x 605mm size incl preperation of surface with two coat of oil bound distemper complete all as specified and as directed. specified by Engr-in-Charge and making good.

Taking down chowkhats or frames with shutters without taking off shutters from frame exe 1.5 Sqm and n.exc 4 Sqm each all as specified and as directed.

Taking down chowkhats or frames with shutters without taking off shutters from frame n exe 1.5 Sqm each all as specified and as directed.

Taking down Aluminium Windows chowkhats or frames with shutters without taking off shutters from frame exe 1.5 Sqm and n.exc 4 Sqm each complete all as specified and as directed.

Taking down Aluminium Windows and Ventilator chowkhats or frames with shutters without taking off shutters from frame n exe 1.5 Sqm each complete all as specified and as directed.

S&F 2nd class hardwood plain solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints all as specified and as directed.

S&F flush shutter 35mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides including 6mm thick wooden lipping around the edges of shutter complete all as specified and directed.

S&F 35mm thick, 2nd class hard wood glazed and skeleton shutter open rebated and prepared to receive glass, gauze, etc. ( without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing gauze etc size of members of shutters as specified and directed.

S&F Solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, fixed in opening as per specification all as directed

S & F for Factory made solid PVC molded with particle board core door shutter 28 to 30 mm thick, styled with 2,4 or 6 raised panel design with 2mm thick molded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing all as specified

S&F for mild steel holdfast, bands, straps, bracket/ clamp for eaves gutter, valley gutter and similar conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

M & L cement concrete (1:2:4) type B-1 using 20mm graded aggregate as in lintel upto 1.5m clear span, steps, bed plates, kerb, coping & kitchen slab etc including necessary form work.

M&L for HDF boards (fire & water proof) of 19mm thick as in cupboards, cabinet, shelves etc including 02 coats of synthetic enamel spray painting glossy finish over a coat of primer incl preparation of surface complete all as specified and as directed.

S&F auto hinges stainless steel suitable for kitchen cabinets,cupboards, Shelves etc

S&F in butt hinges extruded aluminium alloy with galvanized mild steel hinge pin ,anodized of hinges 100 mm type B-21 all as specified and directed.

S&F extruded aluminum alloy handle fabricated type anodized 150mm long all as specified and directed.

S&F extruded aluminium alloy handles fabricated types, anodised each 100mm long all as specified and directed.

S&F Aluminum anodized barrel tower bolt of extruded section 150mm long all as specified and directed.

S&F aluminium anodised barrel tower bolt all as above but 75mm long complete all as specified.

S&F extruded aluminium anodised 75mm long hasp and staple, safety type incl bolt to hinge plate and fixed with screws complete all as specified.

S&F Aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy

S&F in repair 2nd class HW plain fillets rectangular or triangular section wrought fixed scews exc 13 sqcm and n.exc 25 sqcm complete all as specified and directed.

M&L preparing new wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer all as specified

M&L preparing old wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed by Engineer-in-Charge.

S& F for anodized powder coated aluminium shutters of sliding/ openable/ fixed/ fully glazed/partially glazed/fully gauge/ Skeleton door/ window and ventilator frame etc., with glass or guaze and panels with prelaminated particle board inserts, side hung type, without sash bars, using standard aluminium sections including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, roller for sliding windows, locking arrangement, anodized aluminium fittings such as handles, required hinging device etc. complete all as specified and directed. Note : (i) Glass panes / wire cloth will be measured & paid separately as supplied only (ii) Rubber beading will not be weighed.

Supply only plain sheet glass 4.0 mm thick ordinary quality and glazing with aluminum glazing clip in aluminum window shutter not exc 0.5 Sqm in each pane.

Supply only figured glass, pin head type sheet glass 4.0 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window shutter not exc 0.5 Sqm in each pane.

S&F floor door stopper of aluminium alloy body and double tongue, anodised with hard drawnspring of 140 mm size fixed in floor complete all as specified and as directed.

S&F brass 300mm, long ordinary rat tail rod pattern door springs including roller and roller plate complete all as specified and as directed.

Supply only Aluminium alloy wire cloth 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples all as specified and directed.

Supply and fix aluminium alloy wire cloth 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples all as specified and directed.

S&F anodised aluminium grill of approved pattern cut to required size/shape and fixed with position with aluminium bedding & frame with & including F sections, fixed to aluminium windows/ventilators complete all as specified and directed.

Dismantling of 110mm dia cast iron/PVC pipes incl bends/branch pieces jointed in cement mortar and taking out if reqd as directed by Engineer-in-charge.

S&F for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified.

S&F for 110mm dia PVC (SWR) bends any radius complete all as specified.

S&F for 110mm dia PVC (SWR) bends with acess door any radius complete all as specified.

S&F for 110mm dia PVC (SWR) branch piece single (Single Y) equal or unequal complete all as specified.

S&F for 110mm dia PVC (SWR) vent cowl complete all as specified.

Dismantling of 75mm dia cast iron/PVC pipes incl bends/branch pieces jointed in cement mortar and taking out if reqd.

S&F for 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified.

S&F for 75 mm dia PVC (SWR) grade bends of any radius as specified and directed by Engineer-in-charge.

S&F for 75 mm dia PVC (SWR) grade bends with acess door of any radius as specified and directed by Engineer-in-charge.

S&F PVC (SWR) branch piece, single (Single Y) of radius equal or unequal, 75mm dia as specified and directed by Engineer-in-charge.

S&F PVC (SWR) vent cowl, 75mm dia as specified and directed by Engineer-in-charge.

M&L PVC (SWR) multi floor trap 75mm with grating including jointing with solvent cement complete all as specified.

S&F in repairs vitreous china counter wash hand basin flat back of size 550x 400 mm including brackets, 32 mm CP waste coupling, chain and plug, waste fittings, and all necessary inlet, out let connections complete all as specified and directed by Engineer-in-charge.

S&F in repairs 15 mm bore pillar taps, cast copper alloy, chromium plated fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts complete all as specified and directed by Engineer-in-charge. Make :- Prayag Cat No PIS-14H or equivalent as approved in Hindware/Parryware/Cera/Jaquar as approved by GE.

S&F in repairs for bib taps long body with flange cast copper alloy chromium plated fancy type with crutch or butter fly handle screwed down for Iron pipe or for brass fancy for CP brass fancy type 15mm dia complete all as specified and directed by Engineer-in-charge. Make :- Prayag Cat No PIS-08 or equivalent as approved in Hindware/Parryware/Cera/Jaquar as approved by GE.

S&F in repairs two way bib cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup complete all as specified and directed by Engineer-in-charge. Make :- Prayag Cat No PIS-12H or equivalent as approved in Hindware/Parryware/Cera/Jaquar as approved by GE.

S&F in repairs angular stop cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup complete all as specified and directed by Engineer-in-charge. Make :- Prayag Cat No PIS-10H or equivalent as approved in Hindware/Parryware/Cera/Jaquar as approved by GE.

S&F in repairs concealed stop cock cast copper alloy regular body 15mm (male thread) fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup complete all as specified and directed by Engineer-in-charge. Make :- Prayag Cat No PIS-26 or equivalent as approved in Hindware/Parryware/Cera/Jaquar as approved by GE

S&F in repair vitreous China ware wash down white water closet pan (Pedestal pattern with trap incl connecting to drain and flushing pipe, antisyphonage pipe incl PVC sheet cover etc complete all as specified.

S&F in repair PVC valveless syphonic action type flushing cistern of 10 ltr capacity white with intel ball valve float flush pipe and handled including brackets complete all as specified.

S&F in repairs Brass chromium plated tubular towel rail 20mm dia & 60 cm long between flange complete all as specified and directed by Engineer-in-charge. Make :- Prayag Cat No BA-70 or equivalent as approved in Hindware/Parryware/Cera/Jaquar as approved by GE.

S&F in repairs CP Hand shower (health faucet) suitable for 15mm dia pipes & 1.0mtr long flexible tube with wall hook complete all as specified and directed by Engineer-in-charge. Make :- Prayag Cat No BEA-41 or equivalent as approved in Hindware/Parryware/Cera/Jaquar as approved by GE.

S&F for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring jointslaid in trenches and in floor etc using synthetic rubber adhesive cement solvent complete all as specified.

S&F in repairs PVC connection 15 mm dia and 600 mm long with both and nuts

S&F in repairs 1mm thick Stainless steel sinks with drainage board in kitchen with waste coupling, plugs, washers and waste pipe fixed on granite platform, over all size 915 X460mm bowl size 410mm X 330mm X 160mm complete all as specified.

Labour for drilling holes with drill machine with electric driven for gas pipe etc not exc 25 mm dia upto 10cm depth in marble stone etc complete all as specified and directed by Engineer-in-charge.

S& F in repairs 20mm dia, Harrison rails, powder coated anodized aluminium alloy with fixing curtain brackets, stops, rollers etc all as specified and directed.

S&F in repairs wardrobe aluminium hooks set of six, 50mm to 60mm width complete all as specified and as directed.

S&F in repairs for plate rack of stainless steel of size 24X30X10 (inch) with steel sleeves & hanging arrengement for utensile, complete all as specified and directed. Make : Prayag Cat No. P-330 or equivalent in Parryware/Hindware/Cera as approved by GE.

S&F in repairs for providing chromium plated overhead shower rose & shower arm with or without swivel joints fixed to 15mm bore of pipe all as specified and directed. Make :- Prayag Cat No BOS-11 & BOS-47 or equivalent as approved in Hindware/Parryware/Cera/Jaquar as approved by GE

Taking up or down 20mm dia steel tubing connection, including cleaning for refixing or removal to store all as specified and directed.

Taking up or down 25mm dia steel tubing connection, including cleaning for refixing or removal to store all as specified and directed.

S& F for 20mm bore unplasticised PVC pipe of pressure ratings 10kgf/Sqcn including all fittings fixed complete to walls, ceiling or in floor etc all as specified and directed.

S& F for 25mm bore unplasticised PVC pipe of pressure ratings 10kgf/Sqcn including all fittings fixed complete to walls, ceiling or in floor etc all as specified and directed.

S&F in repairs for providing 25mm dia Gun Metal globe or gate valves suitable for UPVC pipes with iron wheel head, screwed both ends for iron pipes all as specified and directed.

Cutting chases in PCC block walls for concealed water tubing etc, and making good, cutting not exc 10 cm girth complete all as specified and as directed by engineer- in- charge.

S&F Rotational moulded Polyethylene [HDPE] Water Tanks, Triple Layered, ISI Marked Cylindrical & Vertical Type 1000 Litres Capacity hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes including taking down old tanks complete all as specified and as directed by Engineer- in - charge.

S&F in repairs Ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe bore dia of 25mm (Minimum weight 455 gms) complete all as specified and as directed by Engineer- in - charge.

M&L for low density polyethylene (LDPE) pipes of 50mm, pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness including similar pattern roof coverings all as specified and directed.

S&F for pre painted Galvalume aluminium zinc coating GI based corrugated/trapezoidal steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering fixed with self tapping screws all as specified and directed.

S&F for pre painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an coloure having tensile strength of 550Mpa as in roof covering, ridge, eves gutters etc fixed with self tapping screws all as specified and directed.

Dismantling structural steel work complete all as specified.

M&L for rolled section as in main and cross beam, hip and jack rafter,purline where connected to common rafters and running rails and guides for sliding doors fixed witg angle cleats or other connecting plates of grade Fe 290 (grde E-165) all as specified and directed.

M & L for mild section for framed work such as grills, gratings, etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars and similar work conforming to Fe-290,Gde E-165 all as specified and directed.

M&L plain aluminium flat section not less than 0.68 Kg per Rm as in wind tie fixed with aluminium self tapping screws etc. all as specified and directed.

M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying 2 coats of synthetic enamel paint over one coat of red oxide primer all as directed.

M&L for preparation of old steel surfaces over 10 cm in width or girth not otherwise described and applying 2 coats of synthetic enamel paint over one coat of red oxide primer all as directed.

S & F stainless steel tubing of any diameter of circular, square or rectangular in shape of grade AISI-316 (type Austenitic anticorrosive in nature) as in railings / grills / designer work including post top cap, bottom plate, cutting, bending, seamless welding and fixing in any type of location incl taking down old railing of any description complete all as specified and as directed.

Demolition of cement concrete of any description and in sunken floor /roof padding etc not otherwise specifically provided for, all as specified and directed.

M&L PCC (1:4:8) type D2 using 40mm graded stone aggregate as in filling in sunken floors complete all as specified & directed by Engineer-in-Charge.

M&L for PCC (1:2:4) type B-0, using 12.5 mm graded stone aggregate as in roof padding / sunken floors and similar work using WPC @ 3% by wt of cement complete all as specified. (Note : WPC shall be measured and paid separately)

M&L 12 mm thick Plaster on RCC roof slab with CM ( 1:4 ) including water proofing compound @ 3% by weight of cement shall be carried out as specified. Note : WPC shall be measured and paid separately

M&L for preparing plastered surfaces and applying primer @ 0.30/Kg per sqm and applying sandwich tack coat of bitumen 85/25 @ 1.2 kg/Sqm laying 3.0mm thick polyster reinforced APP modified water proofing membrane weighing not less than 3.5kg/sqm including removal of existing water proofing treamant on sunken slabs, edges and vertical surfaces complete all as specified

M&L for applying a coat of reflective bituminous aluminium paint @ 0.15 Kg / sqm over APP membrane surface complete all as specified and as directed.

Supply only water proofing compound.

Demolition of Precast cement concrete block walling built in CM or Cement lime Mortar complete all as specified and as directed.

M&L precast cement concrete block masonry exc. 10 cm width with solid block C1 (1:3:6) (using 20 mm graded stone aggregate) and setting in cement mortar (1:6) all as specified.

Providing precast cement concrete solid building blocks or slabs Type B1 1:2:4 (20 mm graded aggregate) 10cm thick (with plain or interlocking joints as directed) setting in mortar, complete, in walls

Taking down cement plaster on brick /stone masonry / concrete surfaces of wall / ceiling incl raking out joints, hacking for key, scrubbing down with water etc and deposited the debris outside the MD land complete all as specified.

M&L for rendering in two layer i.e. 5mm thick in CM 1:4 including with or without mixing water proofing compound over 10mm thick in CM (1:6) on concrete/block masonry surfaces and finished even and smooth without using extra cement on all as specified.(Note WPC shall be measured and paid separately)

M&L for 10mm thick plaster in CM (1:6) on fair faces of concrete/PCC block surfaces of walls finished even and smooth (without using extra cement) all as specified.

M&L for 5mm thick plaster in CM (1:3) on fair faces of concrete surfaces of ceiling finished even and smooth (without using extra cement) all as specified.

Taking down of damaged, loosened cement concrete/cement mortar in RCC walls/soffits of slabs, Columns, beams etc and similar structure members up to depth of 20mm to 40mm cleaning the dismantled portion with wire brush etc remove dust , dirt and other foreign particles etc and washing with water with pressure and applying bonding agent on old concrete surfaces all as per manufacturers instruction, Over prepared surfaces provide 20 mm thick High build polymer modified cement sand mortar ( 1:2.5 ) mixed with 10 liters (minimum) Nitobond SBR per 50 kilogram of cement of M/s FOSROC chemical ( India ) Pvt Ltd or Equivalent product of manufacturer all as manufacturers instruction including necessary scaffolding up to 12 m complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces with 3mm average thick wall care putty and applying two coat of oil bound distemper over one coat of primer including leveling the surface which undulation found with cement putty etc complete all as specified and directed.

M&L for preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

M&L for preparation on newly plastered external wall surface and applying two coat of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint complete all as specified and as directed. (Make: Dulux Weather Shield Max or Apex Ultima from Asian Paints or Berger weather coat All guard as approved by GE).

M&L for complete removal of existing treatment on wall by scrapping, washing, cleaning etc with 3mm average thick wall care putty and applying two coats of oil bound distemper over one coat primer including filling of cracks, holes and including leveling the surface which undulation found with wall care putty etc. all as specified.

M&L for preparing old plastered surfaces of ceilings and applying one white wash including filling of cracks, holes etc. with cement putty all as specified.

M&L for complete removal of existing treatment of old decorated external wall surface by scrapping, washing, cleaning etc and applying two coat of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint incl filling cracks, holes using wall care putty complete all as specified and as directed. (Make: Dulux Weather Shield Max or Apex Ultima from Asian Paints or Berger weather coat All guard as approved by GE).

M&L for broken stone or boulders hard core of gauge exc. 63 mm but not exc. 100 mm, deposited, spread and levelled in layers of not exc.15 cm thick, watered and rolled rammed to a true surface all as specified and directed.

M&L for PCC (1:3:6) type C-1 (20 mm graded aggregate) 75mm thick as in plinth protection with even and smooth finishing without using extra cement complete all as specified and directed.

Forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade `B' all as specified and directed.

M&L PCC (1:4:8) type D2 using 40mm graded stone aggregate as in 75mm thick as in sub base complete all as specified & directed by Engineer-in-Charge.

Surface excavation hard/dense soil n.exc 30cm deep and averaging 15cm deep and getting put all as specified and directed.

Removing excavated materials (soils) n exc 50m and depositing where directed at a level n exc 1.5m above the statrting point complete all as specified.

M&L for machine pressed precast concrete interlocking paver block ruberised glossy finish on top portion of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-40 Grade with grey cement and pigment complete all as specified and as directed.

M&L for sand filling under floors or in foundation including watering and consolidation incl spreading and levelling all as specified and directed.

M&L for ATT post construction bldg along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron all as specified and directed.

M&L for ATT providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment along external wall where the apron is nor provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and as directed.

Demolition of manhole cover slab of reinforced cement concrete.

M&L for pre cast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in manhole cover slab set in cm 1:6 all as specified and directed

S&F TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cracking bending spirally for hooping for columns/beams, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia. all as specified and directed.

M&L for PCC 1:2:4 type B2 as in surface channel and drain & benching of manhole and finishing even and smooth without using extra cement all as specified and directed.

M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in coping all as specified and directed.

Demolition of reinforced cement concrete in any position and paving not exc 15cm thick above or below ground level complete all as specified and as directed.

M&L for RCC (Nominal Mix) Type B1 (1:1.5:3) (20 mm graded aggregate) as in Roof Beams, cantilevers, bressummers, lintels over 1.5m span all as specified and directed.

M&L Formwork for flat rough finished surfaces to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. all as specified and directed.

Separating, scraping and cleaning of reinforcement demolition of concrete measured separately.

S&F Magnetic catcher with plate, glossy finish or Drawer/Cabinet of size not less than 50mm, etc all as specified and directed.

S&F for 300mm size Acrylic corner shelf (soap stand) with guard suitable for bathroom/kitchen and fixed to wall complete all as specified and directed.

Taking down copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials and making good disturbed surfaces of walls, floors, etc.

Taking down fuse Unit/DBs 415 Volt/230 Volt

Taking down old aluminium sub main wiring of any size.

Taking down existing light fittngs any type and any capacity

Material and labour for point wiring for one light point or one fan point controlled by one switch with using 1.5 Sqmm (nominal area) stranded copper conductor, single core, PVC insulated & unsheathed cable, 1100 volts grade in and including concealed PVC conduits (Medium grade) of size not less than 20 mm dia incl proper colour coding Phase -red/yellow/blue, neutral- black and earth green all as directed with sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with and including all accessories for modular fittings like cover plate with frame and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete for one light/fan point all as specified and directed. Make: Gloster/Havells/Anchor/ Polycab/Finolex

Description same as per Srl item No 140 above but One light/fan point controlled by one switch 5 Amps one way.

Description same as per Srl item No 140 above but, One light point controlled by two 2-way switches.

Description same as per Srl item No 140 above but, point wiring for 5 pin switch socket outlet , 6 Amps on independent board

Description same as per Srl item No 140 above but, point wiring for 5 pin switch socket outlet , 6 Amps on same board

Description same as per Srl item No 140 above but,One bell point controlled by one bell push switch 5 Amps one way.

All as per item No.140 above but point wiring with two single core 4.0 sqmm size cables and one 4.0 sqmm green colour cable as earth continuity conductor for one 6 pin 16 Amps socket out let on independent board.

Supplying & fixing for switch modular type, 6 Amps 1 module, 230 volts AC circuit complete all as specified and directed. Make : Roma (Anchor)/Legrand/Simens/Havells or equivalent as approved by GE.

Supplying & fixing for switch modular type, 16 Amps 1 module, 230 volts AC circuit complete all as specified and directed. Make : Roma (Anchor)/Legrand/Simens/Havells or equivalent as approved by GE.

Supplying & fixing for switch socket outlet, modular type 16 A, 3 pin, flush type controlled by one switch 230 volts AC circuit complete all as specified and directed. Make :Roma (Anchor)/Legrand/Simens/Havells or equivalent as approved by GE.

Supplying & fixing for socket outlet modular type 1 way 6 Amps, 3 pin, flush type 230 volts AC circuit complete all as specified and directed. Make : Roma (Anchor)/Legrand/Simens/Havells or equivalent as approved by GE.

Supplying & fixing modular bell push 6 Amp one module 230 V AC Make : Roma (Anchor)/Legrand/Simens/Havells or equivalent as approved by GE.

Supplying & fixing for ceiling rose, 3 phase, PVC polycarbonate, isolated body complete all as specified and directed.

S&F , Electric Bell, single pole working on 230 volts AC supply complete all as directed by Engineer -in- charge Make: Make : Roma (Anchor)/Legrand/Simens/Havells

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified Make:Roma (Anchor)/Legrand/Simens/Havells

Taking down old corroded GI bracket of 25 mm dia and supply and fixing new GI brackets of GI pipe light grade of size 25 mm dia including nuts, bolts and washers for building secufity light all as specified and directed

S& F 25 watts LED building security light fittings win peanuts leans IR 65 luminaire comprise of elegantly designed COB LED ensure efficient optics and uniform distribution of light for street light application. Pressure die cast aluminium housing powder coated graphite grey and toughened glass of IP 65 with pranuts including necessary fixing arrangements as per site requirements class

S & F ceiling fan metallic body 5 star rated ISI marked 1200 mm sweep, 220V Ac, 50 Hz, all as specified and directed.

Taking down carefully electric geysers of any make, type and capacity after disconnecting of electrical and water connections, opening of bottom cover, checking of all parts and taking out copper tank, checking of its leakage and removing the dust, brazing the leakage and painting of geysers with two coats of synthetic enamel painting, replacement of worn out spares and reassembling the geyser and re-fixing in its position all as directed. Note : Spares shall be measured and paid separately under relevant items as supply only.

S & F heating element 1500 watt as specified and directed Engineer-in-charge.

S & F thermostat switch as specified and directed Engineer-in-charge.

S & F pressure release valve as specified and directed Engineer-in-charge.

S & F thermal cut out as specified and directed Engineer-in-charge.

S & F indicator lamp red colour as specified and directed Engineer-in-charge.

S & F indicator lamp green colour as specified and directed Engineer-in-charge.

S & F connecting pipe as specified and directed Engineer-in-charge.

Taking down carefully ceiling fan of any make, size from its location, handed over to AGE E/M store yard without any damage

Taking down carefully exhaust fan of any make, size from its location, handed over to AGE E/M store yard without any damage

Supply & fix heavy duty exhaust fan 300 mm sweep iron dody 1400 RPM with louvers incl all fixing allangement complete all as specified and directed.

Supply & fix heavy duty exhaust fan 250 mm sweep plastic body 10" incl all fixing arrangement complete all as specified and directed.

Supplying, fixing and testing Tube light fittings LED 20 watts 4 feet including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed Make : Philips Cat Part No : Astra line plus or equivalent in CG/Havells as approved by GE.

Supply and fixing LED light fittings of capacity 10 watt with aluminium extruded channel finished in anodised , Class I power factor >0.9 pre wired with electronic driver high translucent frosted PMMA difuser for glare free smooth lighting distrubution surface mounted complete all as specified and directed.

Supplying, fixing and testing surfce mounting LED light fittings 18 watts including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed.

S&F wall decorative light fittings enegy efficient 1x20 3000K (white /yellow colour ) LED dimension 270x130x310 with LED buld complete all as directed.

Taking down carefully existing electronic energy meter of any capacity and any size and refixing the same location after completion of B/R work complete all as specified and directed.

S&F polycabonate sheet enclosure factory made for accomdating one energy meter of size SMC Meter Box Of size 350X250X150MM and one SPN MCB all as directed. Note: including 32 Amp MCB DP

S & F Sub main wiring with PVC insulated FRLS cable 2 single core 6 sq mm 1100 V grade with stranded copper conductor cable using proper colour coding Phase Red/Yellow/Blue, Neutral- black and earth- green in and incl rigid PVC Casing & Capping (ISI marked) incl all specials/accessories etc and provision of PVC insulated FRLS copper conductor single core 6.0 sq mm for earth continuity all as directed. Note : 3 length of cable and one length casing caping shall be measured and paid for one length

S & F Sub main wiring with PVC insulated cable 2 single core 4 sq mm 1100 V grade with stranded copper conductor cable using proper colour coding Phase Red/Yellow/Blue, Neutral- black and earth- green in and incl rigid PVC casing and caping on wall (ISI marked) incl all specials like joint elbow, Tee ,junction , bend etc and provision of PVC insulated copper conductor single core 4.0 sq mm for earth continuity all as directed. Note : 3 length of cable and one length casing caping shall be measured and paid for one length

S & F DB VTPN sheet metal enclosure double door suitable for incoming upto MCCB 160 Amps/200 Amps & outgoing MCB TP / SP (IP-43) Protection Triple pole and neutral 415 V 4 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete all as specified and directed.

S & F SPN DB sheet metal enclosure double door suitable (IP-43) Protection 8 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete.

Supply and Fixing 4 pole MCCB 125 Amp, 50 Hz, 415 V with rupturing capacity 16 KA complete all as specified and directed.

Supplying & fixing MCB SPN 40 Amps (`C’ series) having current rating 10 KA complete all as specified and directed.

Supplying & fixing MCB single pole, 6 to 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed.

Earthing complete with galvanised earth plate electrode 60 cm x 60cmx 6.15 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level , connected to GI earth wire 4 MM Dia as earthling lead by means bolts and nuts check nuts and washers of galvanized iron and connected to main switch board including watering arrangement with PCC chamber , MS funnel with wire mesh,. CI cover with frame etc including necessary excavation in any type of strata , returning, filling removal of soil outside MD land ,filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part I , connected to Earthing test point all as specified and directed on testing on completion.

ANITA VARMA ENTERPRISES

Sree Tirumala Enterprises

BHARAT MULTITECH INDUSTRIES PVT LTD

NAWAZ CONSTRUCTIONS

SALCON ENGINEERS AND FABRICATORS

N Rathinam

ASHOK BISWAS

Kakolil Trade Agencies