REPAIR REPLACEMENT TO PLUMBING SANITARY FITTING SWR PIPES CHAJJA JOINERY FLOORING MASONRY INCLUDING PERIODICAL SERVICES OF CERTAIN MD JCOs OR QTRS AT JESUDASAN ENCLAVE AND DAY TO DAY EM INT ELECTRICAL COMPLAINTS UNDER GE I GOS

Amount

M&L for Providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed.

M&L for Providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.

M&L for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.

M&L for Providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment Of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed.

M&L for Providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed.

Demolition of brickwork built in cement or cement lime mortar including all quoins, arches pillar etc complete all as specified and directed.

M&L Old size Brick work with flyash bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L Old size Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

Taking down cement or cement lime plaster, of any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for Rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for Rendering 5 mm thick in CM 1:3 on RCC ceiling surface and finished even and smooth with out using extra cement complete all as specified and directed.

M&L Rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finish the surfaces even and smooth without using extra cement complete all as specified and directed. Note : Liquid WPC will be measured and paid separately.

Supply only water proofing compound (liquid), ISI marked complete all as specified and directed.

M&L for applying 2mm thick Birla / JK Putty in two layers on newly plastered wall surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M&L for applying 2mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete.

M&L for applying 2mm thick Birla / JK Putty in two layers on newly plastered ceiling surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M&L for applying 2mm thick Birla / JK Putty in two layers on old Ceiling surfaces including complete removal of existing Ceiling finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M&L for applying two coats of oil bound distemper on wall or concrete surfaces over & including a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed.

M&L for applying two coats of oil bound distemper on Ceiling surfaces over & including a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and apply three coat of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceilings and apply three coat of white wash complete all as specified and directed.

M & L for two coats of cement based paint over a coat of primer on new plastered surface of walls including preparation of surface complete all as specified and directed.

M&L applying two coats of acrylic exterior weather proof emulsion paint over a coat of exterior primer on newly plastered wall surfaces/ old decorated wall surfaces, in case of old decorated wall surfaces includes complete removal of existing wall finish of any type with wire brush, brooming, dusting & finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc complete all as specified and directed.

M&L for Complete removal of existing treatment and applying two coats of OBD over a coat of alkali resistant primer on wall complete all as directed by Engineer-in-Charge.

M&L preparation of old painted surfaces and applying one coat of white wash on walls complete all as specified and as directed.

M&L preparation of old painted surfaces and applying one coat of white wash but on ceiling complete all as specified and as directed.

M&L preparation of old painted surfaces and applying one coat of oil bound distemper on walls complete all as directed.

Removing old paints by paint removes or burning off by blow lamps and cleaning with scrapers, any number of coats,any width or girth complete all as specified and directed.

M&L for preparation of old wood or wood based surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L preparation of old decorated wooden painted surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old steel surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L preparation of old decorated Steel painted surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for two coats synthetic enamelled paint to new steel surfaces after preparation over a coat of red oxide primer area over exc 10cm in width or girth etc complete all as specified and directed.

M&L applying two coats Cement based paint on old decorated wall surfaces, includes complete removal of existing wall finish of any type with wire brush, brooming, dusting & finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc complete all as specified and directed.

Demolition of Cement Concrete (unreinforced) of any description & in any position not otherwise specifically provided for complete all as specified & directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed

M&L for Removing Demolished material exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and directed.

M&L for Cleaning the concerned RCC surface by means of wire brush to expose the concrete surface which should be free from all loose particles, dust, laitance, etc complete all as specified and directed.

M&L for Making corner fillets with Polymer modified cementitious (PMC) mortar (PMC:C:M :: 1:2:4 by weight) at all joints of horizontal and vertical surface and doing bore packing with PMC mortar complete all as specified and directed.

M&L for the joints of pipes and concrete/masonry are to be sealed with epoxy putty or epoxy mortar (PMC:C :: 1:2 by weight) and the same is semi-rounded upto 5mm above surface level all along the periphery of PVC pipes complete all as specified and directed.

M&L for application of one coat of Acrylic Polymer Modified Cementitious (APMC) slurry (APMC:C :: 1:2 by weight) coating over the RCC slab surface and carried upto finished floor level on vertical portion (walls) complete all as specified and directed. (Note : This coat is allowed to get dry for 4-6 hours.)

M&L for application of one coat of Acrylic Polymer Modified Cementitious topping rendering (APMC:C:M :: 1:2:2) 1-1.5mm thick over the first coat Acrylic Polymer Modified Cementitious complete all as specified and directed. (Note : This coat is cured for 48 hours.)

M&L for rendering 15mm thick in CM 1:4 on brick or concrete surface, finishing even and smooth using extra cement incl Integral Waterproofing Compound (0.2 % or 100 ml per bag of cement) complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40mm graded brick coarse aggregate as in sunken floors etc all as specified and directed.

M&L for 100 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as sub base of floor complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off premises complete all as specified and directed

M&L for non skid ceramic coloured tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.

M&L for non skid ceramic coloured tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick on vertical surface such as dado / skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in cement mortor 1:4 complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment.

M&L 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L Water proofing treatment on "Non approachable / non accessible and approachable roof" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including taking down of existing roof treatment, properly cleaning & drying the concrete surfaces complete (i) Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg / Sqm (ii) Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm incl cleaning surfaces complete all as specified and directed. (iii) Laying evenly over the bitumen coated surface, polymeric water proofing membrane Hyperplas standard wt not less than 3kg /Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instruction complete all as specified and directed. (iv) Applying two coats of bituminous aluminium paint including preparation complete all as specified and directed.

M&L for PCC 1:2:4 type B0 (Using 12.50 mm graded stone aggregate) in roof padding/ kerbs/ sunken slab etc complete all as specified and directed.

M&L 10 mm thick rendering on roof surfaces/ concrete surface in CM 1:4 with liquid water proofing compound @ 200 ml per 50 Kg cement complete all as specified and directed. (Waterproofing compound should be measured and paid separately).

Taking down eaves gutters and rain water pipes of any size or pattern including all fittings etc complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed.

S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F Stack clamps made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110 mm PVC pipe complete all as specified and directed.

S&F Stack clamps made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 75 mm PVC pipe complete all as specified and directed.

S&F PVC(SWR) bends, any radius of 110 mm bore without access door complete all as specified and directed.

S&F PVC(SWR) bends, any radius of 110 mm bore with access door complete all as specified and directed.

M/L PVC(SWR) Tee of 110mm dia etc complete all as specified and directed.

S&F PVC(SWR) bends, any radius of 75 mm bore without access door complete all as specified and directed.

S&F PVC(SWR) bends, any radius of 75 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access door complete all as specified and directed.

S&F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 75 mm dia with access door complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed.

S&F in repairs PVC (SWR) Floor trap of diameter of outlet 75 mm, plain with grating including jointing with solvent cement 75mm dia etc complete all as specified and directed.

S&F in repairs PVC (SWR) 'P' trap for 110 mm dia etc complete all as specified and directed.

S&F in repirs PVC (SWR) 'S' trap for 110 mm dia etc complete all as specified and directed.

M&L for Cleaning and removing all scale and dirt, etc, from RCC/PVC tanks exc 250 ltr n.exc 500 ltr capacity incl washing of water tank with the use of Tank cleaning motor jet pressure machine and using bleaching powder @ 0.25 Kgs per tank with writing the date of cleaning with any type of paint and from mouths of circulating pipes, including disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring average 25 mm thick surface finished even and rough (as in levelling course) to receive the topping layer complete all as specified and directed.

S&F in repairs ball valves for 20 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and directed.

S&F in repairs ball valves for 25 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 455 gms) complete all as specified and directed.

S & F in repair PVC Tank cover for 500 Ltr capacity fixed in position with nuts and bolt complete all as specified and directed

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor includes cost of glass and includes all other connected accessories.) (Area not exceeding 2.00 sqm)

S&F in repairs 7mm thick aluminium grills of make "Decogrill' model DG 104 surrounded by aluminium 'C' channel with mesh size 75 X 75mm all as specified and directed.

S & F Powder coated three track Aluminium sliding window with frame not less than 1.8 mm thick excluding aluminium grill and including 4 mm thick tinted glass, beading & necessary rubber packing, locking & opening arrangement, all fitting and fixture complete all as specified and directed.

S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed.

S&F Powder coated Aluminium fixed type/ louvered Ventilator with frame not less than 1.8 mm thick & including 4 mm thick tinted glass including beading & necessary rubber packing, locking & opening arrangement if required, all fitting and fixture complete all as specified and directed.

M&L for cutting and removing wild bushes/ vegetation, etc at bldgs above the 2m height from GL and depositing surplus spoil/ rubbish exc 100M but n.exc 500 M complete all as specified and directed.

Taking down chowkhat or frames n exc 1.50 Sqm each with shutters (without taking off shutters from the frame) and removing to store complete all as specified and directed

Taking down chowkhat or frames exc 1.50 Sqm and n exc 4 Sqm each with shutters (without taking off shutters from the frame) and removing to store complete all as specified and directed

Taking down shutter of any description area exceeding 1 sqm but n exc 2 sqm each and removing to store complete all as specified and directed.

Taking down shutter of any description area not exceeding 1 sqm each and removing to store complete all as specified and directed.

M&L Second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

M&L Second class hard wood 35 mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

M&L Second class hard wood 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet re-inforced with MS square tube in opening as per specification and shown on drg SSR Part-II 2010.

S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain cover PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rails lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement , as per specification and shown on drawing in SSR Part-II (2010).

S&F Flush shutters 35 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sidescomplete all as specified and directed.

M&L Second class hard wood 30 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass , gauze etc with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Taking down shutter of any description not exceeding 1 sqm each leaf and refixing, in same opening after easing and adjusting building hard ware etc complete all as specified and directed

Taking down shutter of any description exceeding 1 sqm but not exiding 2 Sqmeach leaf and refixing, in same opening after easing and adjusting building hard ware etc complete all as specified and directed

S&F mild steel flat iron as in bands straps, supports or stays for rainwater, ventilating pipes including bolt if required, hooks (stay) heavy for large gates,hook and pintle hinges,large hasps and staples, brackets for WHB, hold fasts, wall ties, hooks for hanging fans ,cleats for securing purlins to wood trusses or rafters and similar small articles conforming to Fe -290 Gde E-165 complete all as specified and directed.

M&L for Cutting holes in brick walls exc half brick but not exc one brick built in cement mortor or cement lime mortor and stone walls built in lime mortor for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and directed.

S&F 150 mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed

S&F 75 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed

S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed

S&F in repair 150 mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed

S&F in repair 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and directed.

S&F in repair 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed

S&F in repair 75 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.

S&F in repair 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, over all length of cover plate 140 mm with hard drawn steel spring fixed in door etc complete all as specified and directed.

S&F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repairs 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Hacking out old broken glass (any thickness, size quality or description) form wooden frames or stone, concrete or brick surrounds glazed with oil putty or fixed with beads complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and gazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

S&F 3 mm thick figured glass pin headed type and gazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

S&F in repairs aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed.

S&F in repairs door seal with aluminium beading and 50 mm wide rubber seal complete fixed to aluminium/ Wooden doors complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed.

M&L for Fe 410-W (Gde E-250 quality A) Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc complete all as specified and directed

M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed

M&L for PCC 1:3:6 Type C-2 using 40 mm graded stone aggregate in foundation filling and mass concrete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, coping, benching, bed block, lintel band, plinth courses etc and similar work including weathering,slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

S&F in repairs 18/19 mm thick high density PVC/ WPC solid fibre board with prelaminated PVC sheet as Kitchen cupboard and frame including taking down the old cupboard shutters and removing to store complete all as specified and directed.

S&F continuous (piano) hinges of width of flaps (when open) 30 mm, mild steel, bright finish or electrogalvanised complete all as specified and directed.

S & F magnetic catcher catcher with nut and screw of mild steel bright finish all as specified and directed.

S & F 40 mm dia cupboard knobs fixed with nuts screw and washer of mild steel bright finish complete all as specified and directed.

S & F in repair 40 mm dia cupboard knobs fixed with nuts screw and washer of mild steel bright finish complete all as specified and directed.

S & F in repair hasp and stapple safety type aluminium anodised 75 mm long with mild steel hinge pin including bolt to hinge plate fixed with screw complete all as specified and directed.

S & F in repair Toilet Paper Holder with Flap complete all as specified and directed.

S & F in repair sheet Glass Shelf assembly consisting of 5.5 mm glass sheet shelf 12 cm wide with cromium plated bracket guard and railing 60 cm long complete all as specified and directed..

Taking up or down steel tubing and connections including cleaning if refixing required for 15 mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning if refixing required for 20 mm bore of pipe complete all as specified and directed.

S&F GI tubes medium grade (ISI marked) with all fittings fixed complete to walls, ceilings or laid in floors of 15 mm bore of pipe complete all as specified and directed.

S&F GI tubes medium grade (ISI marked) with all fittings fixed complete to walls, ceilings or laid in floors of 20 mm bore of pipe complete all as specified and directed.

S & F 15 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified

S & F 20 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified

Making connection of PPR distrubtion bracnch with PPR main of following outer dia of pipe 16 to 40mm size by providing and fixing tee including cutting and making fusion joint etc

Refixing old steel tubing and connections in new or old position (wall, floor, ceiling etc) of 15 mm bore of pipe complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (wall, floor, ceiling etc) of 20 mm bore of pipe complete all as specified and directed.

S&F in repair Bib taps fancy type chromium plated 15 mm dia, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Taking down bib tap /wash basin tap/pillar tap/stop cock/mixture tap and refixing the same after repair and replacement of washer only for 15 mm bore size without replacing spindles complete all as specified and directed.

Taking down bib tap /wash basin tap/pillar tap/stop cock/mixture tap and refixing the same after repair and replacement of spindles for 15 mm bore size complete all as specified and directed.

S & F in repair Brass chromium plated wall mixer non-telephonic shower arrangement with connecting legs & wall flanges for 15 mm bore of pipe all as specified and directed.

S & F in repair Brass chromium plated hole bidet mixer (Basin mixer) with pop-up waste system with 300 mm long braided hoses complete all as specified and directed.

S & F in repair Brass chromium plated Sink mixer with raised J shaped swinging spout (Wall mounted model) with connecting legs & Wall flanges complete all as specified and directed.

S&F in repair Chromium plated fancy type Stop valves 15 mm, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair, 15 mm bore stop cock, cast copper alloy with long shank and cup (concealed type) fancy type chromium plated screwed down high pressure with crutch & butterfly handle screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair pillar tap cast copper alloy with capstan head chromium plated crewed down high pressure with or without lettered hot or cold with long screwed sharks and ply nuts 15 mm dia complete all as specified and directed.

S & F in repair bottle trap chromium plated for WHB as per approved quality all as per specified and directed.

S&F in repair PVC waste pipe for WHB etc all as specified and directed.

S&F in repairs 32 mm bore dia waste coupling of (min weight 32 mm-45 gm of PTMT) (half or full threaded) etc complete all as specified and directed

S&F in repair CP grating 100 mm dia with waste hole (minimum weight 40 gm) complete all as specified and directed

S & F in repair CP Jet spray for 15 mm bore all as specified and directed.

S & F in repairs Hand shower (Health faucet) with 1 mtr long Easy flex tube in crome finish & wall hook Complete all as specified and directed.

M&L in repairs for vitreous china wash basin, white,flat back, size 550 x 400 mm including supply & fixing of brass chromium plated coupling 32 mm etc complete all as specified and directed.

M&L in repairs vitreous china squatting pan , ‘Orissa’ Pattern, size 580 X 440 mm white, with integral foot rests etc. complete all as specified and directed.

M&L in repair Wash down water closet vitreous china white pedestal pattern with 'P' or 'S' trap including connecting to outgoing drain pipe & to flushing pipe excluding flushing cistern and flush pipe complete all as specified and directed.

S&F in repairs plastic water closet seat cover, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed

S& F in repair Stainless steel plate rack of size 750X750X200 incl fixing with rawal plug and screws complete all as specified and directed.

S & F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 litre capacity hoisted and fixed in position including dismantling of old u/s water tank and removing to store complete all as specified and directed

S&F ball valves for 20 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and directed.

S&F in repairs, PVC valveless syphonic action type low level flushing cistern, 10 ltrs capacity with inlet, ball valve, float and handle including bracket complete all as specified and directed

S & F in repair internal fitting for low level flushing cistern (Syphon) complete all as specified and directed.

S&F in repairs flush pipe 32 mm dia of polyethylene of low or high density or PVC, for low level cistern complete all as specified and directed.

S & F in repair 125 mm dia chromium plated shower rose of with or without swivel joint incl fixing to steel pipe complete all as specified and directed.

S&F in repair PVC connection 15 mm bore, 450 mm long complete with both ends unions complete all as specified and directed.

S&F in repairs CP anodised tubular tower rail, 20 mm dia, D type, 60 cm long between flanges etc.

S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe of 20 mm bore dia of pipe complete all as specified and directed.

S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends (ISI marked) for iron pipe of 25 mm bore dia of pipe complete all as specified and directed.

S&F in repair 20 mm PP-R Gate valves (brass insert) as per requirement of the site complete to walls, ceilings or in floors complete all as specified

S&F in repair 25 mm PP-R Gate valves (brass insert) as per requirement of the site complete to walls, ceilings or in floors complete all as specified

S & F in repair Soap dish any type fixed to plug with chromoium plated brass screw complete all as specified and directed.

S & F in repair Corner glass shelf with brackets complete all as specified and directed.

S&F in repair Stainless steel fancy type curtain rod 25 mm dia as approved complete all as specified and directed

S&F in repair SS Curtain rod Bracket fancy type for curtain rod 25 mm dia of any colour as approved complete all as specified and directed.

Attending of day to day E/M internal electrical all types of petty nature complaints at any time and any heights/places such as work shops/ hangers,auditorium etc and including Md Accn & OTM Accn such as '' No light complaints'', Internal electrical LT breakdowns at LT Panels,current leakages,electric shocking complaits,Earth faults etc and including replacement of all types of defective light fittings(LED fittings,Spot,Focus,indoor high bay lights, wall mounted street light,bulk head fittings,globe light,surface light, recess mounting light, ceiling light,posttop lanterns etc),fan condensor,Regulators,dimmers,5/15 Amps 1&2 way switches,5 amps same bord , 5Amps independent board & 15 Amps sockets,MCB SP,SPN,TP,TPN & MCCBs and all types of DBs,5/15 amps Plug top,Holders,ceiling roses, bell push,call bells,indicator switches,bed switches,study lights, all types & sizes of hylam sheets,PVC boxes, Modular top covers of all types, MS sunken boxes of all sizes, All types of Modular fittings and fixtures and including MS /PVC boxes, fixing of electrical energy metres,Not working exhaust fans & Geysers,replacent of water heater elements etc for zone 'A' and including replacing of accessories (items) in place of unserviceable items inrespect of all type of E/M complaints. And including providing complaint register, trademen docket slips ( as per given formate by department) and after completion of the complaint docket slip matched and paste with the counter docket slip and all documents kept at AGE E/M Office complete under supervision of concerned JE E&M/Engr-in-charge. Note:- (i) Accessories & connected items shall be measured and paid separately as supply only fixing in repairs under relevant item of schedule. (ii) All old unsv credit materials should be deposited in MES yard day wise after completed of the job, the same material will be issued to contractor through gate pass as schedule of credit against after completion of the work.(iii) The rates quoated is deemed to be included for complaint register docket slips/records & Incl providing necessary Tools should be kept /carry by the electricians during rectification of complaits including minor cunsumable items ie screw, insulation tape,nuts, bolts & washers etc. (iv) If the complaint rectification is not done by the contractor within the 24 Hours. The recovery charges to be applicable against the complaint X three Each Job costs. (v) Detailes of day wise completed complaits clips along with materials incorporated details and complaint before picture and after work completion picture submitted to JE/Engr-in-Charge.

Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings i.e removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made for conditions separately ) and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing without andulations complete all as specified and directed.( Note:- All credit materials should be deposited in MES yard as available on work site the same materials should be issued to contractor through gate pass as per schedule of credit materials against contract agreement).

Material and labour for cutting chasing,pinning of brick/ stone/concrete wall at any height wall cutting and chases for concealed wiring for 20/25 mm PVC conduit dia pipe,water tubing,etc and making good to facings where required and pointing in cement motor 1:3 to ends or edges of landigs,wall surfaces etc,cutting not exc 10 cm girth and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing with existing wall complete all as specified and directed

M&L for one light point controlled by one switch and point wiring using approved colour coding incl providing circuit wiring with 1.5 sqmm PVC insulated, FRLSH type, ISI marked,conf to IS-694/1990 unsheathed, multistranded, single core, copper cable 1100 volts grade cables drawn through PVC Conduit 20/25 mm dia medium grade(MMS) at any height and all accessories are concealed in walls / roofs / floors / ceiling etc. flush mounting modular MS box made out of 1.60mm thick suitable for modular top cover and frame for fixing of modular switches,sockets,fan regulators, blank plate etc and including 1.5 Sqmm PVC insulated multistranded FRLSH type unsheathed(Green colour),single core cable with copper cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade with necessary putty for smooth finishing complete all as specified and directed.

As per Item No. 182 above, but for one fan point controlled by one switch and one regulator.

As per Item No. 182 above, but for one exhaust fan point controlled by one switch .

As per Item No. 182 above, but for one 5 pin 6 amps socket point controlled by one 6 amps switch on independent board .

As per Item No. 182 above, but for one 5 pin 6 amps socket point controlled by one 6 amps switch on same board .

As per Item No. 182 above, but for one bell/buzzer point controlled by one bell push.

As per Item No. 182 above, but for one light point controlled by two 2 way switches.

All as per item No.186 & 187 above,but for one 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on independent board and point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm complete all as specified and directed

All as per item No.186 & 187 above,but for one 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on same board.

All as per item No.185 above ,but point wiring with 4.0 sqmm and earth conductor of size 4 sqmm complete all as specified and directed.

M&L for but for one light point controlled by on switch and point wiring using approved colour coding incl providing circuit wiring with 1.5 sqmm PVC insulated, FRLSH type, ISI marked,conf to IS-694/1990 unsheathed, multistranded, single core, copper cable 1100 volts grade cables drawn through PVC casing and caping 20/25 mm dia medium grade(MMS) at any height and all accessories are concealed in walls / roofs / floors / ceiling etc. flush mounting modular MS box made out of 1.60mm thick suitable for modular top cover and frame for fixing of modular switches,sockets,fan regulators, blank plate etc and including 1.5 Sqmm PVC insulated multistranded FRLSH type unsheathed(Green colour),single core cable with copper cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade with necessary putty for smooth finishing complete all as specified and directed for the following:-

All as per item No.192 above ,but for one fan point controlled by one switch and regulator

All as per item No.192 above ,but for one exhaust fan point controlled by one switch.

All as per item No.192 above ,but for one 5 pin 6 amps socket point controlled by one 6 amps switch on independent board .

All as per item No.192 above ,but for one 5 pin 6 amps socket point controlled by one 6 amps switch on same board .

All as per item No.192 above ,but for one bell point controlled by one bell push.

All as per item No.192 above ,but for one light point controlled by two 2 way switches.

All as per item No.195 & 195 above,but for one 6 pin 6/16 amps socket outlet point controlled by one 16 amps switch on independent board and point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm complete all as specified and directed.

All as per item No.199 above ,but for one 6 pin 6/16 amps socket outlet point controlled by one 16 amps switch on same board.

All as per item No.195 above ,but point wiring with 4.0 sqmm and earth conductor of size 4 sqmm complete all as specified and directed. Make (1).PVC Copper conductor cable FRLSH type :-Finolex / Havells / RR Kabel / Polycab (2) PVC conduit (MMS)/PVC Casing & Caping & Accessories ISI Marked :-Presto Plast/Finolex/Kalinga Gold/Plaza/AKG Plastics Pvt Ltd

Supply & fixing modular type switch 10 Amps, single pole,1way,1 module,240V,AC, ISI Marked complete all as specified and directed. Make:- Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AAB as existing type and as approved

Supply & fixing modular type switch 10 Amps ,2way,single pole,1 module,240V,AC, ISI Marked complete all as specified and directed. Make:- Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AAB as existing type and as approved

Supply & fixing modular type bell push 6 Amps,1 module, single pole, 240 volts,AC, ISI Marked complete all as specified and directed.Make:- Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AAB as existing type and as approved

Supply & fixing modular type switch 16 Amps, single pole,1way,1 module,240V,AC, ISI Marked complete all as specified and directed.Make:- Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AAB as existing type and as approved

Supply & fixing modular type socket shuttered type 6 Amps, 2/3 Pin combined 2 module,240V,AC ISI Marked complete all as specified and directed.Make:- Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AAB as existing type and as approved

Supply & fixing modular type socket 6 A/16 Amps, 6 Pin combined shuttered socket 2 module,240V,AC ISI Marked complete all as specified and directed. Make:- Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AAB as existing type and as approved

Supply & fixing red color lighting indication lamp 6 Amps, single pole,240volts,AC,50 Hz suitable for 1 module ISI Marked complete all as specified and directed. Make:- Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AAB as existing type and as approved

Supply & fixing modular type step fan speed regulator 120W, 2 module,230volts,AC, 360 degree rotation 0 to 4/5 steps, ISI Marked complete all as specified and directed. Make:- Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AAB as existing type and as approved

Supply and fix call bell AC, 230 Volts single pole, multi music type ISI marked, complete all as specified and directed. Make:- Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AAB as existing type and as approved

Supply and fix call bell ding dong AC, 230 Volts single pole, multi music type ISI marked, complete all as specified and directed. Make:- Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AAB as existing type and as approved

Supply & fix angle lamp holder, insulated body with back plate for batten fittings complete all as specified and directed. Make : Anchor/Havells/ Legrand,

Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body ISI marked, complete all as specified and directed. Make : Anchor/Havells/ Legrand,

Supply only, and fixed as per complaint mentioned in item No. 179 LED batten complete slim fitting 20 watts integrated design, easy to install,efficency 100 lm/w ,PC diffuser and robust housing, high quality materials,pre-wired including providing PVC round/PVC square blocks-02 Nos and connected with LED fitting to ceiling rose and removing old unserviceable fitting complete all as specified and directed.

Supply only, and fixed as per complaint mentioned in item No.179, LED batten complete slim fitting 10 watts integrated design, easy to install,PC diffuser and robust housing, high quality materials,pre-wired including providing PVC round/PVC square blocks-02 Nos and connected with LED fitting to ceiling rose and removing old unserviceable fitting complete all as specified and directed.

Supply only, and fixed as per complaint mentioned in item No.179 decorative inverter type LED 20 watt batten light fitting white lighting, with square profile and polycarbonate channel,Lithium lon battery with charging time 8 hours-10 hours and back up time upto 4 hours high quality materials and design,extruded aluminium housing enhances safety,high quality PC diffuser, easy to install, efficency 125 lm/w and including providing pre-wired, and PVC/Wooden round or square blocks -02 Nos and connected with LED fitting to ceiling rose and removing old unserviceable fitting complete all as specified and directed. Make :-Crompton/Havells/Philips

Supply and fixing decorative LED 9 watt decorative, globe type,high quality warm/white lightig,ploycarbonate materials suitable for 9 watt LED lamp warm/white ,B22,220 Volts AC with high efficiency, soft glare free light complete with LED lamp warm/white,holder suitable for wall surface and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed. Make :-Havells Cat No. LHFOGBE1TZ1W035 (Sana wall light) or equivalent make in Crompton/Philips

Supply only, and fixed as per complaint mentioned in item No.179, 3 watt LED recess mounted round dowlighte with presure die-cast aluminium heat sink & clear PC,aesthetical designed,decorative,3000K spot light for low ceiling as cover in white powder coated finish with independent electronic LED driver and including 3 Watt LED lamp and all necessosary connected accessories and connected with fitting to ceiling rose and removing old unserviceable fitting complete all as specified and directed. Make :-Crompton/Havells/Philips

Supply only, and fixed as per complaint mentioned in item No.179, 6 watt LED recess mounted round dowlighter with presure die-cast aluminium heat sink & clear PC,aesthetical designed,decorative,3000K spot light for low ceiling as cover in white powder coated finish with independent electronic LED driver and including 6 Watt LED lamp and all necessosary connected accessories and connected with fitting to ceiling rose and removing old unserviceable fitting complete all as specified and directed. Make :-Crompton/Havells/Philips

Supply only, and fixed as per complaint mentioned in item No.179, 9 watt LED recess mounted round dowlighter with presure die-cast aluminium heat sink & clear PC,aesthetical designed,decorative,3000K spot light for low ceiling as cover in white powder coated finish with independent electronic LED driver and including 9 Watt LED lamp and all necessosary connected accessories and connected with fitting to ceiling rose and removing old unserviceable fitting complete all as specified and directed. Make :-Crompton/Havells/Philips

Supply only, and fixed as per complaint mentioned in item No.179, recess mounting 2'x2' LED 36 Watt light fitting slimmest 9 mm thin in class LED ceiling panel with best in class aesthetick white powder coated frame blended seamlessly with ceiling layout suitable for 600X600mm mudular ceiling grid and also can be suspended with provided kit and including connecting up with ceiling rose to fitting and including removing old unserviceable item complete all as specified and directed complete all as specified and directed. Make :-Crompton/Havells/Philips

Supply only recess mounting 2'x2' LED 40 Watt light fitting slimmest 9 mm thin in class LED ceiling panel with best in class aesthetick white powder coated frame blended seamlessly with ceiling layout suitable for 600X600mm mudular ceiling grid and also can be suspended with provided kit and including connecting up with ceiling rose to fitting and including removing old unserviceable item complete all as specified and directed complete all as specified and directed. Make :-Crompton/Havells/Philips

Supply only, and fixed as per complaint mentioned in item No.179, 6 watt Octane LED panel square type slim, compact,aliminium die cast edge lit panel recess mounted square fittings and fixture with LED opal diffuser (lamp/strip) and separate electronic LED driver and removing old unserviceable fitting complete all as specified and directed Make :-Crompton/Havells/Philips

Supply only, and fixed as per complaint mentioned in item No.179,12 watt Octane LED panel square type slim, compact,aliminium die cast edge lit panel recess mounted square fittings and fixture with LED opal diffuser (lamp/strip) and separate electronic LED driver and removing old unserviceable fitting complete all as specified and directed Make :-Crompton/Havells/Philips

Supply only, and fixed as per complaint mentioned in item No.179, 15 watt Octane LED panel square type slim, compact,aliminium die cast edge lit panel recess mounted square fittings and fixture with LED opal diffuser (lamp/strip) and separate electronic LED driver and removing old unserviceable fitting complete all as specified and directed.Make :-Crompton/Havells/Philips

Supply only, and fixed as per complaint mentioned in item No.179, 24 watt Octane LED panel square type slim, compact,aliminium die cast edge lit panel recess mounted square fittings and fixture with LED opal diffuser (lamp/strip) and separate electronic LED driver and removing old unserviceable fitting complete all as specified and directed.Make :-Crompton/Havells/Philips

Supply only, and fixed as per complaint mentioned in item No.179, flexible neo LED strips 24 watt 6000k ,240Volts ,standard length ,single phase with uniform light distribution and long lasting adhesive for perfect cove light,colour as per required and including all connected accessories suitable for proper fixing as per site requirement and removing old unserviceable fitting complete all as specified and directed.Make :-Crompton/Havells/Philips

Supply only, and fixed as per complaint mentioned in item No.179, flexible LED strips trica AC LED tricolor strip light, 20/24 watt 6000k ,240Volts,IP-65 standard length ,single phase with uniform light distribution and long lasting adhesive for perfect cove light,colour as per required and including all connected accessories suitable for proper fixing on pole,wall surface,steel structures etc as per site requirement and removing old unserviceable fitting complete all as specified and directed.Make :-Havells code:-FLEXISTRIPTRICAROPE 120D 18 MSTRIPIP65 or equivalent in Crompton/Philips

Supply only, and fixed as per complaint mentioned in item No.179, 3 star LED 9 watt bulb CDL,B22,240Volts,950 lumen outpu, colour tem 6500K,length 113 mm,width 60 mm,lamp current rating,0.055A suitable for holder, globe type wall fixture with high efficiency and removing old unserviceable item complete all as specified and directed.Make :-Crompton/Havells/Philips

Supply only, and fixed as per complaint mentioned in item No.179, LED 35 watt bulb,240Volts, with high efficiency,suitable for holder, highbay type down light fiitings and removing old unserviceable item complete all as specified and directed.Make :-Crompton/Havells/Philips

Supply only, and fixed as per complaint mentioned in item No.179, LED 60 watt bulb,240Volts, with high efficiency,suitable for holder, highbay type down light fiitings and removing old unserviceable item complete all as specified and directed.Make :-Crompton/Havells/Philips

Supply only, and fixed as per complaint mentioned in item No.179, LED 100 watt bulb,240Volts, with high efficiency,suitable for holder, highbay type down light fiitings and removing old unserviceable item complete all as specified and directed.Make :-Crompton/Havells/Philips

Supply only, and fixed as per complaint mentioned in item No.179, LED 120 watt bulb,240Volts, with high efficiency,suitable for holder, highbay type down light fiitings and removing old unserviceable item complete all as specified and directed.Make :-Crompton/Havells/Philips

Supply only, and fixed as per complaint mentioned in item No.179, LED bldg secruity light fitting of capacity 40 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4/5 KV inbuilt surge protector and cable connection from ceiling rose/looping box/switch board/DBs to light fitting and testing and including removing of old unserviceable item complete all as specified and directed.Make:- Crompton cat ref No.LSTS-40-CDL-M or equivalent make in Havells / Philips as approved

Supply only, and fixed as per complaint mentioned in item No.179, LED wall mounted bldg secruity light fitting of capacity 30 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4/5 KV inbuilt surge protector and cable connection from ceiling rose/looping box/switch board/DBs to light fitting and testing and including removing of old unserviceable item complete all as specified and directed.Make:- Crompton cat ref No.TRP-415-30-57-SL-LM-NBK or equivalent make in Havells / Philips as approved

Supply only, and fixed as per complaint mentioned in item No.179,LED wall mounted bldg secruity light fitting of capacity 25 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4/5 KV inbuilt surge protector and cable connection from ceiling rose/looping box/switch board/DBs to light fitting and testing and including removing of old unserviceable item complete all as specified and directed.Make:- Crompton cat ref No.TRP-415-25-57-SL-LM-NBK or equivalent make in Havells / Philips as approved

Supply only, and fixed as per complaint mentioned in item No.179, LED wall mounted bldg secruity light fitting of capacity 20 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4/5 KV inbuilt surge protector and cable connection from ceiling rose/looping box/switch board/DBs to light fitting and testing and including removing of old unserviceable item complete all as specified and directed.Make:- Crompton cat ref No.TRP-415-20-57-SL-LM-NBK or equivalent make in Havells / Philips as approved

Supply only, and fixed as per complaint mentioned in item No.179, 20 watts LED post top lantern made in cast aluminium spigot housing with decorative opal polycarbonate diffser and IP65 protection and providing suitable fixing arrangements such as necessary GI pipe at post top/pillar and civil work, lugs,glands,nuts,bolts and washers and including removing old unserviceable item complete all as specified and directed. Make :-Crompton Cat Ref:LPTH-20-CDL or equivalent in Havells / Bajaj /Philips as approved

Supply only, and fixed as per complaint mentioned in item No.179, 40 watts LED post top lantern made in cast aluminium spigot housing with decorative opal polycarbonate diffser and IP65 protection and providing suitable fixing arrangements such as necessary GI pipe at post top/pillar and civil work, lugs,glands,nuts,bolts and washers and including removing old unserviceable item complete all as specified and directed. Make :-Crompton Cat Ref:LPTO-40-CDL-M or equivalent in Havells / Bajaj /Philips as approved

Supply only, and fixed as per complaint mentioned in item No.179, LED floof light light fitting of capacity 100 Watt LED, light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4/5/10 KV inbuilt surge protector and cable connection from looping box to light fitting and testing and including removing of old unserviceable item complete all as specified and directed.Make:-Havells Cat NO.LHEECNP7PB7J100 or equivalent in approved make

Supply only, and fixed as per complaint mentioned in item No.179,LED floof light light fitting of capacity 50 Watt LED, light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4/5/10 KV inbuilt surge protector and cable connection from looping box to light fitting and testing and including removing of old unserviceable item complete all as specified and directed.Make:-Havells Cat NO.HEECNP7PB6J050 or equivalent in approved make

Supply only, and fixed as per complaint mentioned in item No.179, LED floof light light fitting of capacity 30 Watt LED, light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4/5/10 KV inbuilt surge protector and cable connection from looping box to light fitting and testing and including removing of old unserviceable item complete all as specified and directed.Make:-Havells Cat NO.LHEECNP7PB6J030 or equivalent in approved make

Supply and fixing in repairs sheet metal enclosure with acrylic door type, double door ,415 volts AC,VTPN DB, 4 way,8+12 modules, flush mounting with 200amps copper busbar, 2 neutral/earth bars links and MCCB incomer, and MCB SPN/SP/TPN as outgoing and complete for IP43&54 DBs protection incl providing necessary lugs,nuts,bolts and washers etc and including removing old unserviceable DBs and incl making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed.Make:-Legrand Cat No.5077 30 4 way or equivalent make in ABB/Havells

Supply & fixing in repairs sheet metal enclosure with acrylic door type, double door ,415 volts AC,TPN DB, 4 way,flush mounting with 200amps copper busbar, 2 neutral/earth bars links and MCCB incomer, and MCB SPN/SP/TPN as outgoing and complete for IP43&54 DBs protection and incl providing necessary lugs,nuts,bolts and washers etcand including removing old unserviceable DBs and incl making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed.Make:-Legrand cat No.5078 85 4 way or equivalent in ABB/Havells

Supply & fix in repairs sheet metal enclosure with DD 415 volts AC,TPN,DB, 4way, flush mounting with 100amps copper busbar, 2 neutral/earth bar and MCB incomer,MCB TPN/FP, and MCB SP as outgoing and complete for IP 43 DBs protection nd including removing old unserviceable DBs making good the disturbed surfaces to match with existing surface and colour shade acomplete all as specified and as directed. Make: Havells/Legrand/Hager or equivalent as approved.

Supply & fix in repairs in repair sheet metal enclosure, AD/DD 240 volts AC,SPN,DB 12 way for flush mounting with 100amps copper busbar,neutral bar,earth bar and MCB incomer,MCB SPN/DP, and MCB SP as outgoing and complete for IP 43& IP54 DBs protection nd including removing old unserviceable DBs making good the disturbed surfaces to match with existing surface and colour shade acomplete all as specified and as directed. Make: Havells/Legrand/Hager or equivalent as approved.

Supply & fixing in repairs sheet metal enclosure, with acrylic door type, double door, 240 volts AC,SPN,DB, 8 way, flush mounting with 100amps copper busbar,neutral bar,earth bar links and MCB incomer MCB SPN/DP and MCB SP as outgoing for IP 43& IP54 DBs protection nd including removing old unserviceable DBs and making good the disturbed surfaces to match with existing surface and colour shade acomplete all as specified and as directed. Make:-Legrand Cat No.5076 21 8 way or equivalent make in ABB/Havells

Supply & fix in repairs sheet metal enclosure, with acrylic type double door, 240 volts AC,SPN,DB, 4 way, flush mounting with 100amps copper busbar,neutral bar,earth bar and MCB incomer,MCB SPN/DP, and MCB SP as outgoing for IP 43& IP54 DBs protection nd including removing old unserviceable DBs making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed. Make:-Legrand Cat No.5076 20 4 way or equivalent in ABB/havells

Supply only, and fixed as per complaint mentioned in item No.179, MCB SP 6 to 32 Amps 10 KA,"C" series,AC,240Volts,50Hz , ISI marked and including removing old unsv items complete all as specified and directed.Make:- Legrand/Hager/Havells or as approved make

Supply only, and fixed as per complaint mentioned in item No.179, MCB SPN 32 Amps 10 KA,"C" series,AC,240Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed.Make:- Legrand/Hager/Havells or as approved make

Supply only, and fixed as per complaint mentioned in item No.179, MCB FP, 63 Amps 10 KA,"C" series,AC,415Volts,50 Hz,ISI Marked and including removing old unsv items complete all as specified and directed.Make:- Legrand/Hager/Havells or as approved make

Supply only, and fixed as per complaint mentioned in item No.179, MCB FP 63 to 100 Amps 10 KA,"C" series,AC,415Volts,50 Hz,ISI Marked and including removing old unsv items complete all as specified and directed.Make:- Legrand/Hager/Havells or as approved make

M & L for sub main wiring complete in repairs with 2 run of 10 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit in concealed ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 10 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv submain wiring making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Two run of 10 sqmm single core copper conductor cable and one run of 10 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit. Note : - Two run of 6 sqmm single core copper conductor cable and one run of 6 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit. (1)PVC Copper cable :-Finolex/Havells/RR Kabel/Plaza, (2) PVC conduit(mms) & Accessories :-Presto Plast/Finolex/Kalinga Gold/Plaza Note :- Making good the disturbed surfaces to match with existing surface incl necessary plastering and incl colour shade and putty, cutting & cheasing work rate will be deemed into quoted rate only.

M & L for sub main wiring complete in repairs with 2 run of 10 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn drawn through and including PVC casing and caping of size 20 mm, ISI marked as required at site with all accessories such as Tee,corner, overlaping connector etc and including one run of 10 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed.Two run of 10 sqmm single core copper conductor cable and one run of 10 sqmm single core copper conductor cable as earth continuity and one run of PVC casing caping shall be measured as one unit. Note : - Two run of 6 sqmm single core copper conductor cable and one run of 6 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit. (1)PVC Copper cable :-Finolex/Havells/RR Kabel/Plaza, (2) PVC conduit(mms) & Accessories :-Presto Plast/Finolex/Kalinga Gold/Plaza Note :- Making good the disturbed surfaces to match with existing surface incl necessary plastering and incl colour shade and putty, cutting & cheasing work rate will be deemed into quoted rate only.

M & L for sub main wiring complete in repairs with 2 run of 6 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit in concealed ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 4 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv sub main wiring and making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 6 sqmm single core copper conductor cable and one run of 6 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit. (1)PVC Copper cable :-Finolex/Havells/RR Kabel/Plaza, (2) PVC conduit(mms) & Accessories :-Presto Plast/Finolex/Kalinga Gold/Plaza Note :- Making good the disturbed surfaces to match with existing surface incl necessary plastering and incl colour shade and putty, cutting & cheasing work rate will be deemed into quoted rate only.

M & L for sub main wiring complete in repairs with 2 run of 6 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn drawn through and including PVC casing and caping of size 20 mm, ISI marked as required at site with all accessories such as Tee,corner, overlaping connector etc and including one run of 6 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv sub main wiring and making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 6 sqmm single core copper conductor cable and one run of 6 sqmm single core copper conductor cable as earth continuity and one run of PVC casing caping shall be measured as one unit. Note : - Two run of 6 sqmm single core copper conductor cable and one run of 6 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit. (1)PVC Copper cable :-Finolex/Havells/RR Kabel/Plaza, (2) PVC conduit(mms) & Accessories :-Presto Plast/Finolex/Kalinga Gold/Plaza Note :- Making good the disturbed surfaces to match with existing surface incl necessary plastering and incl colour shade and putty, cutting & cheasing work rate will be deemed into quoted rate only.

M & L for sub main wiring complete in repairs with 2 run of 4 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit in concealed ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 4.0 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv submain wiring and making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Two run of 4 sqmm single core copper conductor cable and one run of 4.0 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit. Note : - Two run of 6 sqmm single core copper conductor cable and one run of 6 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit. (1)PVC Copper cable :-Finolex/Havells/RR Kabel/Plaza, (2) PVC conduit(mms) & Accessories :-Presto Plast/Finolex/Kalinga Gold/Plaza Note :- Making good the disturbed surfaces to match with existing surface incl necessary plastering and incl colour shade and putty, cutting & cheasing work rate will be deemed into quoted rate only.

M & L for sub main wiring complete in repairs with 2 run of 4 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn drawn through and including PVC casing and caping of size 20 mm, ISI marked as required at site with all accessories such as Tee,corner, overlaping connector etc and including one run of 4 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv sub main wiring and making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Two run of 4 sqmm single core copper conductor cable and one run of 4 sqmm single core copper conductor cable as earth continuity and one run of PVC casing and caping shall be measured as one unit. Note : - Two run of 6 sqmm single core copper conductor cable and one run of 6 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit. (1)PVC Copper cable :-Finolex/Havells/RR Kabel/Plaza, (2) PVC conduit(mms) & Accessories :-Presto Plast/Finolex/Kalinga Gold/Plaza Note :- Making good the disturbed surfaces to match with existing surface incl necessary plastering and incl colour shade and putty, cutting & cheasing work rate will be deemed into quoted rate only.

Supply only, and fixed as per complaint mentioned in item No.179, suitable for flush mounting sheet steel enclosure metal clad plug and socket including MCB SP 20 Amps, 10KA 'C 'series, 230 Volts suitable for AC's/Geysers complete all as specified and directed.Make:- Legrand / Hager/ Havells or as equivalent approved make

Supply only, and fixed as per complaint mentioned in item No.179, MCCB, 63 Amps,4 pole,415 Volts , 16/18KA thermal magnetic type with necessary lugs,thimbles, nuts bolts and washers and including removing old unserviceable item from existing loaction complete all as specified and as directed. Make:- Legrand / Hager/ Havells or as equivalent approved

Supply only, and fixed as per complaint mentioned in item No.179, MCCB, 100 Amps,4 pole,415 Volts , 16/18KA thermal magnetic type with necessary lugs,thimbles, nuts bolts and washers and including removing old unserviceable item from existing loaction complete all as specified and as directed. Make:- Legrand / Hager/ Havells or as equivalent approved

Supply only, and fixed as per complaint mentioned in item No.179, modular switch 1 way,10Amps,1module,240V, ISI Marked, and suitable for existing type as per site requirement and including removing old usnv items complete all as specified and directed. Make :- Havells,Cabtree/Roma Anchor/Legrand/ABB

Supply only, and fixed as per complaint mentioned in item No.179, modular switch 1 way,16Amps,1module,240V, ISI Marked and suitable for existing type as per site requirement and including removing old usnv items complete all as specified and directed. Make :- Havells,Cabtree/Roma Anchor/Legrand/ABB

Supply only, and fixed as per complaint mentioned in item No.179, modular type socket shuttered type 6/10 Amps, 2/3 Pin combined 2 module,240V,AC ISI Marked and suitable for existing type as per site requirement and including removing old usnv items complete all as specified and directed. Make :- Havells,Cabtree/Roma Anchor/Legrand/ABB

Supply only, and fixed as per complaint mentioned in item No.179, modular type socket 16/20 Amps, 6 Pin combined shuttered socket 2 module with light indication ,240V,AC ISI Marked and suitable for existing type as per site requirement and including removing old usnv items complete all as specified and directed. Make :- Havells,Cabtree/Roma Anchor/Legrand/ABB

Supply only, and fixed as per complaint mentioned in item No.179, modular switch 2 way,10Amps,1module,240V, ISI Marked and suitable for existing type as per site requirement and including removing old usnv items complete all as specified and directed. Make :- Havells,Cabtree/Roma Anchor/Legrand/ABB

Supply only, and fixed as per complaint mentioned in item No.179, modular type step fan speed regulator 100/120 W, 2 module,230volts,AC, 360 degree rotation ISI Marked and suitable for existing type as per site requirement and including removing old usnv items complete all as specified and directed. Make :- Havells,Cabtree/Roma Anchor/Legrand/ABB

Supply only, and fixed as per complaint mentioned in item No.179, modular bell push 1 way,10Amps,1module,240V, ISI Marked and suitable for existing type as per site requirement and including removing old usnv items complete all as specified and directed. Make :- Havells,Cabtree/Roma Anchor/Legrand/ABB

Supply only, and fixed as per complaint mentioned in item No.179, call bell AC, 230 Volts single pole, multi music type ISI marked, and suitable for existing type as per site requirement and including removing old usnv items complete all as specified and directed. Make :- Havells,Cabtree/Roma Anchor/Legrand/ABB

Supply only, and fixed as per complaint mentioned in item No.179,PVC polycarnonate rectangular block for mounting,switches,sockets,fan regulator etc with 3 mm thick plastic laminated sheet cover of size 100mm X100mm X50mm deep, ISI Marked as per site rqmnt and including removing old unserviceable item from existing loaction complete all as specified and as directed. Make :-Presto Plast/Preeti Plast/Finolex/Plaza or equivalent as approved

Supply only, and fixed as per complaint mentioned in item No.179, PVC polycarbonate rectangular block for mounting,switches,sockets,fan regulator etc with 3 mm thick plastic laminated sheet cover of size 175mm X100mm X50mm deep, ISI Marked as per site rqmnt and including removing old unserviceable item from existing loaction complete all as specified and as directed. Make :-Presto Plast/Preeti Plast/Finolex/Plaza or equivalent as approved

Supply only, and fixed as per complaint mentioned in item No.179, PVC polycarbonate rectangular block for mounting,switches,sockets,fan regulator etc with 3 mm thick plastic laminated sheet cover of size 200mm X150mm X50mm deep, ISI Marked as per site rqmnt and including removing old unserviceable item from existing loaction complete all as specified and as directed. Make :-Presto Plast/Preeti Plast/Finolex/Plaza or equivalent as approved

Supply only, and fixed as per complaint mentioned in item No.179, PVC polycarbonate rectangular block for mounting,switches,sockets,fan regulator etc with 3 mm thick plastic laminated sheet cover of size 250mm X200mm X50mm deep, ISI Marked as per site rqmnt and and including removing old unserviceable item from existing loaction complete all as specified and as directed. Make :-Presto Plast/Preeti Plast/Finolex/Plaza or equivalent as approved

Supply only, and fixed as per complaint mentioned in item No.179, PVC polycarnonate rectangular block for mounting,switches,sockets,fan regulator etc with 3 mm thick plastic laminated sheet cover of size 350mm X300mm X50mm deep ISI Marked aas per site rqmnt and and including removing old unserviceable item from existing loaction complete all as specified and as directed. Make :-Presto Plast/Preeti Plast/Finolex/Plaza or equivalent as approved

Supply only, and fixed as per complaint mentioned in item No.179, metal flush box 1/2 module, ISI marked,and suitable for existing type as per site requirement and including removing old unserviceable item from existing loaction complete all as specified and as directed. Make :- Havells,Cabtree/Roma Anchor/Legrand/Hagar/ABB or equivalent as approved

Supply only, and fixed as per complaint mentioned in item No.179, metal/PVC flush box 3 module ,ISI marked, and suitable for existing type as per site requirement and including removing old unserviceable item from existing loaction complete all as specified and as directed. Make :- Havells,Cabtree/Roma Anchor/Legrand/Hagar/ABB or equivalent as approved

Supply only, and fixed as per complaint mentioned in item No.179, metal/PVC flush box 4/5 module, ISI marked,and suitable for existing type as per site requirement and including removing old unserviceable item from existing loaction complete all as specified and as directed.Make :- Havells,Cabtree/Roma Anchor/Legrand/Hagar/ABB or equivalent as approved

Supply only, and fixed as per complaint mentioned in item No.179, metal/PVC flush box 6 module,1.60mm thikness ,ISI marked and suitable for existing type as per site requirement and including removing old unserviceable item from existing loaction complete all as specified and as directed. Make :- Havells,Cabtree/Roma Anchor/Legrand/Hagar/ABB or equivalent as approved

Supply only, and fixed as per complaint mentioned in item No.179, metal/PVC flush box 8 module,1.60mm thikness ,ISI marked and suitable for existing type as per site requirement and including removing old unserviceable item from existing loaction complete all as specified and as directed. Make :- Havells,Cabtree/Roma Anchor/Legrand/Hagar/ABB or equivalent as approved

Supply only modular white cover plate with frame 1 module,ISI marked and suitable for existing type as per site requirement and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed. Make :- Havells,Cabtree/Roma Anchor/Legrand/Hagar/ABB or equivalent as approved

Supply only, and fixed as per complaint mentioned in item No.179, modular white cover plate with frame 2 module ,ISI marked and suitable for existing type as per site requirement and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed. Make :- Havells,Cabtree/Roma Anchor/Legrand/Hagar/ABB or equivalent as approved

Supply only, and fixed as per complaint mentioned in item No.179, modular white cover plate with frame 3 module ,ISI marked and suitable for existing type as per site requirement and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed. Make :- Havells,Cabtree/Roma Anchor/Legrand/Hagar/ABB or equivalent as approved

Supply only, and fixed as per complaint mentioned in item No.1, modular white cover plate with frame 4/5 module ,ISI marked as per site rqmnt and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed. Make :- Havells,Cabtree/Roma Anchor/Legrand/Hagar/ABB or equivalent as approved

Supply only, and fixed as per complaint mentioned in item No.1, modular white cover plate with frame 6 module incl ,ISI marked and suitable for existing type as per site requirement and screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed. Make :- Havells,Cabtree/Roma Anchor/Legrand/Hagar/ABB or equivalent as approved

Supply only, and fixed as per complaint mentioned in item No.1, modular white cover plate with frame 8 module ,ISI marked and suitable for existing type as per site requirement and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed. Make :- Havells,Cabtree/Roma Anchor/Legrand/Hagar/ABB or equivalent as approved

Supply only, and fixed as per complaint mentioned in item No.179, call bell ding-dong sound type, 230 Volts,50 Hz,ISI marked and including removing old unserviceable item complete all as specified and directed. Make :- Anchor/Legrand/Havells/Leader/Roma or as approved make

Supply only, and fixed as per complaint mentioned in item No.179, switch piano type, 6 Amps, flush mounted,1 way, 240 volts,ISI marked and including removing old unserviceable item complete all as specified and directed. Make :- Anchor/Legrand/Havells/Leader/Roma or as approved make

Supply only, and fixed as per complaint mentioned in item No.179, bell push 6 Amps,240 volts, ISI marked and including removing old unserviceable item complete all as specified and directed. Make :- Anchor/Legrand/Havells/Leader/Roma or as approved make

Supply only, and fixed as per complaint mentioned in item No.179, switch socket outlet 6Amps,5 pin,flush type 240 volts,ISI marked and including removing old unserviceable item complete all as specified and directed. Make :- Anchor/Legrand/Havells/Leader/Roma or as approved make

Supply only, and fixed as per complaint mentioned in item No.179, switch socket combination 6Amps,5 pin, flush type 240 volts,ISI marked and including removing old unserviceable item complete all as specified and directed. Make :- Anchor/Legrand/Havells/Leader/Roma or as approved make

Supply only, and fixed as per complaint mentioned in item No.179, switch socket combination 6/16Amps,6pin 240 volts with neon indicator type,ISI marked and including removing old unserviceable item complete all as specified and directed. Make :- Anchor/Legrand/Havells/Leader/Roma or as approved make

Supply only, and fixed as per complaint mentioned in item No.179, switch socket combination 6/16Amps,6pin ,240 volts,ISI marked and including removing old unserviceable item complete all as specified and directed. Make :- Anchor/Legrand/Havells/Leader/Roma or as approved make

Supply only, and fixed as per complaint mentioned in item No.179, batten holder /angle holder/ threaded holder suitable for batten fitting etc. ISI marked and including removing old unserviceable item complete all as specified and directed. Make :- Anchor/Legrand/Havells/Leader/Roma or as approved make

Supply only, and fixed as per complaint mentioned in item No.179, fan regulator piano type electronic, stepped type, 100 Watts,240Volts,AC,ISI marked and including removing old unserviceable item complete all as specified and directed. Make :- Anchor/Legrand/Havells/Leader/Roma or as approved make

Supply only, and fixed as per complaint mentioned in item No.179, ceiling rose,3 terminal/PVC polycarbonate,isolated body 240Volts,AC,ISI marked and including removing old unserviceable item complete all as specified and directed. Make :- Anchor/Legrand/Havells/Leader/Roma or as approved make

Supply only, and fixed as per complaint mentioned in item No.179, junction boxes plastic round cover,four terminals and including removing old unserviceable item complete all as specified and directed. Make :- Anchor/Legrand/Havells/Leader/Roma or as approved make

Supply only, and fixed as per complaint mentioned in item No.179, plug top 15/16 Amps for Geyser, and including removing old unserviceable item complete all as specified and directed. Make :- Anchor/Legrand/Havells/Leader/Roma or as approved make

Supply only, and fixed as per complaint mentioned in item No.179, plug top 5/6 Amps and including removing old unserviceable item complete all as specified and directed. Make :- Anchor/Legrand/Havells/Leader/Roma or as approved make

Supply only, and fixed as per complaint mentioned in item No.179, 2.5 mfd,240volts, 50Hz and including removing old unserviceable item complete all as specified and directed. .Make : Epcos/Universal/tipcon/CG/Concap/Havells/C&S or as approved make

Supply and fix PVC casing and caping of size not less than 10x5 mm width with all accessories such as tees,corners,overlaping connector etc for encasing existing telephone cables, LAN cables along the wall/ceiling/roof etc complete all as specified and as directed.

Supply and fix PVC casing and caping of size not less than 25x5mm width with all accessories such as tees,corners,overlaping connector etc for encasing existing telephone cables, LAN cables along the wall/ceiling/roof etc complete all as specified and as directed.

Supply and fix PVC casing and caping of size not less than 25X25 mm width with all accessories such as tees,corners,overlaping connector etc for encasing existing telephone cables, LAN cables,TV Cable wires etc along the wall/ceiling/roof etc complete all as specified and as directed.

Supply and fix PVC casing and caping of size not less than 50X50 mm width with all accessories such as tees,corners,overlaping connector etc for encasing existing telephone cables, LAN cables,Cable wires etc along the wall/ceiling/roof etc complete all as specified and as directed.

Fixing only and connecting electric meters 10-60 Amps any type single or three phase complete all as specified and directed and including providing necessary accessories complete all as specified and as directed.

Taking down carefully existing electric meters of any type/capacity from work site and deposit to MES store yard/ Charge holder without damage for safe custody and supply and fixing single phase electronic meters temper proof LCD display with polycarbonate cover 230Volts,10-60 Amps, accuracy class-I,50Hz, confirming to IS-13779,IP-54,with parameters to show data,time current reading,load,PF,voltage and KWH including connected necessary items for functioning complete all as specified and directed.Make:-Secure/L&T or equivalent make in any approved.

Taking down carefully existing electric meters of any type/capacity from work site and deposit to MES store yard/ Charge holder without damage for safe custody and supply and fixing three phase electronic meters temper proof LCD display with polycarbonate cover 415Volts,10-60 Amps, accuracy class-I,50Hz, confirming to IS-13779,IP-54,with parameters to show data,time current reading,load,PF,voltage and KWH including connected necessary items for functioning complete all as specified and directed.Make:-Secure/L&T or equivalent make in any approved.

Supply and fixing copper conductor cable, PVC insulated, sheathed,flexible, multistranded,ISI marked, 1100 volts grade 3 core ;0.75 sqmm and including electric connection from ceiling fan to ceiling rose and including removing old unserviceable item complete all as specified and directed. Make:-Havells/Finolex/Polycab

Supply and fixing copper conductor cable, PVC insulated, sheathed,flexible, multistranded,ISI marked, 1100 volts grade 3 core ; 2.5 sqmm and including electric connection from electric appliences to ceiling rose/distribution board and including removing old unserviceable item complete all as specified and directed. Make:-Havells/Finolex/Polycab

Supply only, and fixed as per complaint mentioned in item No.179, electronic LED driver 36/40watt,230Volts,50 Hz suitable for 2ft X 2ft recess mounting LED fitting suitable for as per existing in any make or same and including electric connection with necessary wiring connecting from light fitting to ceiling rose and including removing old unserviceable item complete all as specified and directed. Make:-Havells/Crompton/HPL/Philips or as existing make

Supply only, and fixed as per complaint mentioned in item No.179, electronic LED driver 18/20 watt,230Volts,50 Hz suitable for LED fitting suitable for as per existing in any make or same and including electric connection with necessary wiring connecting from light fitting to ceiling rose and including removing old unserviceable item complete all as specified and directed. Make:-Havells/Crompton/HPL/Philips or as existing make

Supply only, and fixed as per complaint mentioned in item No.179, electronic LED driver 15 watt,230Volts,50 Hz suitable for LED fitting suitable for as per existing in any make or same and including electric connection with necessary wiring connecting from light fitting to ceiling rose and including removing old unserviceable item complete all as specified and directed. Make:-Havells/Crompton/HPL/Philips or as existing make

Supply only, and fixed as per complaint mentioned in item No.179, electronic LED driver 12 watt,230Volts,50 Hz suitable for LED fitting suitable for as per existing in any make or same and including electric connection with necessary wiring connecting from light fitting to ceiling rose and including removing old unserviceable item complete all as specified and directed. Make:-Havells/Crompton/HPL/Philips or as existing make

Supply only, and fixed as per complaint mentioned in item No.179, electronic LED driver 9/10 watt,230Volts,50 Hz suitable for LED fitting suitable for as per existing in any make or same and including electric connection with necessary wiring connecting from light fitting to ceiling rose and including removing old unserviceable item complete all as specified and directed. Make:-Havells/Crompton/HPL/Philips or as existing make

Supply only, and fixed as per complaint mentioned in item No.179, electronic LED driver 6 watt,230Volts,50 Hz suitable for LED fitting suitable for as per existing in any make or same and including electric connection with necessary wiring connecting from light fitting to ceiling rose and including removing old unserviceable item complete all as specified and directed. Make:-Havells/Crompton/HPL/Philips or as existing make

Supply only, and fixed as per complaint mentioned in item No.179, electronic LED driver 3 watt,230Volts,50 Hz suitable for LED fitting suitable for as per existing in any make or same and including electric connection with necessary wiring connecting from light fitting to ceiling rose and including removing old unserviceable item complete all as specified and directed. Make:-Havells/Crompton/HPL/Philips or as existing make

Taking down carefully existing electric meters of any type/capacity from work site and deposit to MES store yard/ Charge holder without damage for safe custody and supply and fixing smart electric meter three phase four wire dual source prepaid energy meter as per BIS -15884 marked in existing meter board /floor panel with pre payment capacity touch keypad based digital having current range 10-60 Amps,415 Volts, accuracy class 1.0 along with parallel home display split unit with inbuilt load control switch containing provision for TOD and RTC, inbuilt feature to sense the DG mode through PLSI dual source registration wrt grid as well as DG supply and dynamic load allocation facility from grid and DG ,capable to define for tariff slabs, happy hours and holidays definition and including providing necessary items for functioning complete all as specified and directed.Make:-Secure/L&T or equivalent make in any approved.

M/s MAA BHAIRABI ENTERPRISES (BID ID -3076279)

M/s Bapujee Builders and Traders (BID ID -3082405)

HARAGOURI SUPPLIERS (BID ID -3075924)

R K Traders (BID ID -3078180)

M/s M M Engineering Systems (BID ID -3076692)

R J ENTERPRISES (BID ID -3087435)

M/S S. N. ENTERPRISES (BID ID -3077300)