Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.3 LAccepted-AOC 5 A LANE 1 GREATER KAILASH JAMMU J K 180011 | JAMMU | JAMMU AND KASHMIR | 180011 | L1 | Accepted-AOC L1 | |
| 2 | L2₹30.6 L+₹1.3 L (4.50%)Rejected-Finance 96 SHASTRI NAGAR SHASTRI NAGAR JAMMU JAMMU KASHMIR 180004 | JAMMU | JAMMU AND KASHMIR | 180004 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹30.8 L+₹1.5 L (5.02%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹31.9 L+₹2.5 L (8.68%)Rejected-Finance | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹32.7 L+₹3.4 L (11.7%)Rejected-Finance H NO 39 3 CHANNI HIMMAT JAMMU 180015 J K | JAMMU | JAMMU AND KASHMIR | 180015 | L5 | Rejected-Finance Other than L1 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
17 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Satwari
GE Satwari jammu
REPAIR REPLACEMENT OF ROOF SHEETS OF CERTAIN OTM BUILDING OF AGE B R I AND AGE B R II UNDER GE SATWARI
2022_MES_501461_2
GEJM-65/2021-22
Open Tender
Civil Works
Item Rate
180 days
Satwari
D Class Cat a i
9 documents required · 9 mandatory
₹500
GE Satwari
₹60,000
Yes
26 May 2022
19 Apr 2022
19 May 2022
19 Apr 2022
17 May 2022
4 May 2022
60 days
Amount
Note :-1. Work will be carried out upto 2nd storey of bldgs also as per direction of Engr-in-charge including necessary formwok and scaffolding required as per site conditions & no extra payment shall be made on this account. 2. Complete site will not be vacated for the same,only requirement basis site for work will be handed over and work will be carried out up to 2nd storey
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nanital or similar pattern roof coverings.
Supply and fixing 0.63mm thick galvanised, corrugated mild steel sheet grade 'O' with Zinc coating 120 gms/sqm, with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts in roof, walls etc. all as specified and directed.
Supply and fixing 0.80 mm thick plain galvanised mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275.
Dismantling asbestos cement (Corrugated or semi-corrugated) sheets in roof covering complete all as specified and directed.
Supply and fixing Pre- painted galvatume aluminum zinc coating (AZ-150 Micron) GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified.
Supply and fixing Pre-painted galvalume aluminum zinc coating (AZ-150 Micron) GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified.
Supply and fixing 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc.
Supply and fixing structural steel work conforming to Fe-410-W (Gde E-250 Quality-A or B) or Fe-290 Gde E-165, as in roof trusses (framed), purlins, crane gantries, rails, vertical post and fastenings, heavy brackets framing (Beam, tee, angle, channel, squre hollow section or flat section) including distance pieces, cleats etc complete all as specified.
Ditto all as per item No. 09 here-in-before but in main and cross beam, hip and jack rafters, purlins, plates (plain or chequered), channels, square cut or notched etc.
Dismantling of timber scantling 40 sqcm and over in section in any position (unframed work) complete all as specified and directed
Dismantling timber scantlings 40 sq. cm and over in section,in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section framed Work) all as specified.
Supply and fixing of 2nd class hardwood, clean sawn in timber scantling complete all as specified and directed.
Ditto all as per item No. 13 here-in-before but except timber complete all as specified and directed .
Material and labour for closing bolt holes etc in old corrugated steel sheets by sealing with one bitumen and one curved GI washer on either side and 6mm GI bolts and nuts, all set in stiff white lead,bolts not exceeding 25mm in length complete as directed.
Cutting holes through stone walls built in CM and making good in cement mortar 1: 3 or cement concrete 1 : 2 : 4 type B-1 superficial area exec 150 sqcm and n.exc 400 sqcm complete all as specified and directed.
Dismantling of ceiling board (Fibre, pulp, any type of insulation etc) or insulation board / slabs/any thickness including cover fillets and snap grids complete all as specified and directed
Supply and fixing in repair GI snap grid frame work (Grid size 605cm x 605cm) for false ceiling consisting of main runner 'T' of size 24mm x 32mm and 0.3mm thick , Secondary runner 'T' of size 24mmx25mm and 0.3mm thick,GI angle 24mmx24mm and 0.4mm thick,Bottom exposed capping of width 24 mm of all T-sections shall be of 0.25mm thick PPGI, hot dipped galvanised steel with zink coating not less than 120gm / Sqm ,ceiling grid system duly suspended by 4mm dia GI wire hanging from existing purlins /roof slab with butterfly clips including Gypsum ceiling tiles of size 595 x 595 x 6 mm laminated with 0.07 mm thick polyvinyl film on the face side and 10 micron metalized polyester film on the back side fixed on GI snap grid complete all as specified and directed by Engr-in- Charge. Make: Gyproc, Lafarg boral Gypsum India, India Gypsum
Supply & fixing in repair Gypsum ceiling tiles of size 595 x 595 x 6 mm laminated with 0.07 mm thick polyvinyl film on the face side and 10 micron metalized polyester film on the back side fixed on GI snap grid complete all as specified and directed by Engineer-in-charge. Make: Gyproc, Lafarg boral Gypsum India, India Gypsum
Demolition of cement concrete(unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Demolition of brick work of any description in any position built with cement mortar complete all as specified and directed.
Material and labour for brick work with sub class ‘B’ Bricks straight or curved on plan exec 6 mtr mean radius with CM 1: 6 complete all as specified and directed.
Material and labour for brick work with sub class ‘B’ Bricks straight or curved on plan exec 6 mtr mean radius with CM 1: 4 complete all as specified and directed.
Ditto all as per item No 23 but except bricks complete all as specified and directed.
Material and labour for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping etc. complete all as specified and directed.
Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified. Note :- Work will be carried out upto 2nd storey of bldgs also as per pirection of Engr-in-charge including necessary formwok and scaffolding required as per site conditions & no extra payment shall be made on this account.
Material and labour for rendering 15mm thick on fair faces of brick or concrete surface walls, in cement mortar 1:6, rendering is to be finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.
Material and labour for rendering 15 mm thick on fair faces of brick or concrete surface walls, in cement mortar 1:4 , rendering is to be finished even and fair without using extra cement (up to 2nd storey with necessary scaffolding) complete all as specified and as directed by Engineer-in-charge.
Ditto all as per item No 28 but other than fair faces of brick work complete all as specified and directed.
Material and labour for rendering 10 mm thick on fair faces of brick or concrete surface ceilings, in cement mortar 1:3 , rendering is to be finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.
Supply only Water proofing compound liquid.
Material and labour for applying two coat of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper to make surface even and smooth complete all as specified.
Material and labour for applying one coat of synthetic enamel paint on old painted steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper to make surface even and smooth and apply putty and primer where requred complete all as specified.
Material and labour for applying two coat of synthetic enamel paint on new wooden surfaces of any description over a coat of pink primer having width/girth exceeding 10 cm complete all as specified including preparation and necessary filling as and where requered to make surface even and smooth.
Material and labour for applying one coat of synthetic enamel paint on old painted wood surfaces of any description having width/girth exceeding 10 cm complete all as specified including preparation and where requered to make surface even and smooth.
Material and labour for preparation of old decorated concrete/ plastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with sand paper and applying two coat of oil bound distemper on old decorated wall surface including two coats of wall care putty of 1 to 2 mm thick on uneven surface as and where required.
Material ad labour for preparation of new plastered surfaces of walls & applying two coats of oil bound distemper over two coat of wall care putty of 1 to 2 mm thick and one coat of primer complete all as specified.
Material and labour for preparation of old decorative plastered/concreat surface of wall, chajja, facia, face of columns, beam ect by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with sand paper and applying one coat of weather proof exterior emulsion (APEX) with necessary scaffoding up to 4th storey, including necessary filling of wall care putty on uneven surface as and where required all as specified.
Material and labour for preparation of new plastered/concrete surfaces of walls, (up to 4th sorey with necessary scaffolding) and applying two coat of cement based paint over one coat of primer complete all as per specified and directed by Engr-in-charge.
Material and labour for preparation of old decorated plastered /concrete/ brick surfaces of walls (up to 4th storey with necessary scaffolding) and applying one coat of cement based paint on old decorated surfaces including preparation complete all as per specified and directed by Engr-in-charge.
Material and labour for preparation of old decorated brick /concrete plastered /un-plastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of lime white wash on the walls, pillars, cornices etc. complete all as specified and directed.
Material and labour for preparation of new decorated brick /concrete plastered /un-plastered surfaces of walls, Pillars, cornices etc and applying three coat of white wash on ceiling.
Hacking out old broken glass (any thickness,size quality or description) from any types of wooden/steel/alum (up to 4th storey) frames or stone concrete or brick surrounds glazed with putty or fixed with beads.
Supply and fixing 3 mm thick sheet glass ordinary quality glazing with oil putty or any type of beads in square n.exc. 0.5 Sq each pane in any type of frame of iron/ Steel/ Wood/ Aluminium as required at site complete all as specified (upto fourth storey with necessary scaffolding).
Supply and fixing 3 mm thick figured glass, pin head type and glazing with oil putty or any type of beads in square n.exc. 0.5 Sq each pane in any type of frame of iron/Steel/Wood/Aluminium as required at site complete all as specified (upto fourth storey with necessary scaffolding).
Supply and fixing in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm, fixed with stainless steel wire staples complete all as specified.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.
Excavating in trenchs not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth and not exc 10 Sqm on plan in any type of soil and getting out all as spd.
Material and labour for cement concrete M-10 (Nominal mix) using 40 mm graded crushed stone aggregates in foundation filling and mass concrete complete all as spd.
Material and labour for form work to sides of concrete fdn footing base of columns and raft beams sides and soffits (if any) of fdn and plinth beams and similar wk vertical or to batter for rough finished surfaces.
Material and labour for form work to sides of pillars, posts, struts, pier, columns square, rectangular or polygonal rough finished surface of concrete.
Material and labour for RCC M-25 design mix as in fdn, including raft, fooling fdn beams, plinth beams bases for columns and mass concrete.
Material and labour for RCC M-25 design mix as in columns, pillars, piers, posts and struts etc.
Material and labour for TMT bars (Fe 500),10 mm dia and over in reinforcement cut to length, bent to shape required incl bending spirally cranking, hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips, all as specified.
Material and labour for TMT bars (Fe 500), 5mm dia and over upto incl 10mm dia stirrups bending spirally or hooping for columns, hooking ends and binding with mild sleet wire not less than 0.90mm dia complete all as specified and directed.
Material and labour for angle section,fixed independently, without connecting plates, as in swan neck fencing of Fe-410-w(gde E-250A)
Supply and fixing in repairs galvanized, 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc as directed
Returning, filling in (soil) including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil all as spd.
Removal of excavated material (soil) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5m above the starting point all as spd.
Supply and fixing concertina coil fencing with punched tape concertina coil 600mm dia, stretched to 6 metre length, having 50 Nos spiral turns per 6 metre length, spring core wire (2.59mm thick) of high tensile strength of 1620 N/Sqmm with tape (0.52mm) thick Hot dip galvanised upto 20 microns, weight of each coil 8.50 Kg and fixing the same on existing Y-shaped angle iron with 6 horizontal R.B.T.(Reinforced barbed Tape) wire, stud fixed with GI staple sand GI clips to retain horizontal, clips shall be @ 5 Nos per 2 siral turns approximate 125 clips per coil including necessary bolts complete all as specified and as directed.
Demolition of cement concrete (unreinforced) of any description (up to 2nd storey) and in any position, removed out of MOD land all as directed.
Preparation surfaces of old concrete floor by picking, scrubbing down with steel brushes, sweeping clean and washing down with water to remove dust etc and PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) with average thickness 20 mm finished even and smoothes in roof padding ( upto 2nd storey building)all as specified and as directed.
Complete removal of existing water proofing treatment of any description incl under layer, taking down of cement plaster / demolition of cement concrete any thickness and removal of debris off the premises including grubbing up of trees and preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water to remove toremove all loose dirt/dust and applying roof treatment as below:- (i) Applying a coat of bitumen primer membrane 0.4ltr/sqm by the same membrane manufacturer of density at 25 degree C’ 0.87-0.89Kg/Litre and viscosity 70-160 CPS till the surface properly impregnates and insolvent oil primer evaporayes completely (ii) Applying Polymeric Polypropylene polymer membrane “APP” (Atactic poly propylene polymer ) modified prefabricated five layer 3mm thick not less than 3.6 Kg/Sqm with 160 grams/sqm non woven polyster made at centre core reinforced laid with 75 mm side overlap and 100 overlap in length using butane torch with 10cm over laps which shall be thermo fused by flame (iii) Applying course of two coats of aluminium paint over the APP membrane all as specified. All joints and change in direction shall be covered with cement mortar 1:3 mixed with SBR latex @ 200 ml/bag of cement and curved before laying membrane
Material and labour for 15 mm thick plaster in CM 1:3 finished fair and even on RCC roof slab ( upto 2nd storey building) incl mixing of IWPC. (Note :- IWPC shall be measured and paid for separately)
Takind down GI tubing of 20 mm dia and connection and incl cleaning for refixing or removel all as spfd.
Supply and fixing for steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20 mm, complete all as specified and as directed.
Dismantling/ disconnecting/ demolition of water storage tank of capacity exc 500 n exc 1000 Ltrs and removing from site or refixing in position.
Supply and fixing for rotational moulded polyethylene water storage tanks with float valve, plastic lid cover, triple layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 1000 ltr incl making connection completed all as specified.
M/S MOHAN LAL GUPTA
M/S MANJIT SINGH AND SONS
CELMAC REGD
M/S ANIL MAHAJAN
M/S VED PAUL MAHAJAN
M/S PARAMJEET SINGH
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .