Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.7 CrAccepted-AOC HARINAGAR BEHIND MAHESHWARY MARKET PO TATISILWAI DIST RANCHI PIN 835103 | RANCHI | JHARKHAND | 835103 | ₹3.7 Cr | L1 | Accepted-AOC Being L1 vendor |
| 2 | L2₹3.9 Cr+₹15.1 L (4.04%)Rejected-Finance | ₹3.9 Cr+₹15.1 L (4.04%) | L2 | Rejected-Finance Being L2 |
| 3 | L3₹4.0 Cr+₹30.3 L (8.09%)Rejected-Finance | ₹4.0 Cr+₹30.3 L (8.09%) | L3 | Rejected-Finance Being L3 |
| 4 | Rejected-Technical 1ST 45 MAHENDER SINGH NEAR PRINCE SERVICE CENTRE NARELLA NORTH DELHI DELHI NORTH WEST DELHI DELHI 110040 UDYAM DL 06 0039553 07BVCPS9687K1ZL R M | NORTH DELHI | DELHI | 110040 | - | - | Rejected-Technical Documents not submitted by the vendor |
| Sl No | Description | Qty | Unit | Pioneer Traders L2 | MAHAJAN EXPORTS & GENERAL STORE L3 | Universal Enterprises L1 |
|---|---|---|---|---|---|---|
| 1.0017 x RL PDs | ||||||
| 1.01 | Excavating over areas, n exc 1.5 m deep and getting out soft /loose soil all as specified and as directed. | 1,822.4 | Cum | 275 ₹5,01,160 | 297 ₹5,41,252.8 | 266 ₹4,84,758.4 Lowest |
| 1.02 | Excavating over areas, exc 1.5 m deep ,n exc 3.0 m deep and getting out soft /loose soil all as specified and as directed. | 1,057.06 | Cum | 445 ₹4,70,391.7 | 468 ₹4,94,704.08 | 425 ₹4,49,250.5 Lowest |
| 1.03 | M & L Cement concrete 75 mm thick in fdn type
B-2, 1:2:4 (40 mm graded aggregate) complete as specified and as directed. | 57.12 | Cum | 6,710 ₹3,83,275.2 | 6,999 ₹3,99,782.88 | 6,648 ₹3,79,733.76 Lowest |
| 1.04 | M & L for RCC M-20 (Nominal Mix) type B1 1:2:4 (20 mm graded aggregate) in Foundation, including rafts, footing, foundation beams, bases for column etc complete all as specified and directed. | 165.24 | Cum | 6,715 ₹11,09,586.6 | 7,030 ₹11,61,637.2 | 6,665 ₹11,01,324.6 Lowest |
| 1.05 | M & L formwork to sides of rough finished flat surface of concrete foundations, footings, raft, bases of columns, plinth beams and similar work vertical or to batter with cover blocks all as specified and as directed. | 184.11 | Sqm | 350 ₹64,438.5 | 364 ₹67,016.04 | 325 ₹59,835.75 Lowest |
| 1.06 | M & L for RCC M-20 (Nominal Mix) type B1 1:2:4 (20 mm graded aggregate) in walls, retaining walls, basement walls, and the like, any thickness, above top of footings, including attached pilasters and buttresses all as specified and directed. | 295.29 | Cum | 8,745 ₹25,82,311.05 | 8,840 ₹26,10,363.6 | 8,273 ₹24,42,934.17 Lowest |
| 1.07 | M & L Formwork to rough finished flat surface of Walls, pillars, posts, struts, piers, columns and stanchions with cover blocks all as specified and directed. | 2,013.31 | Sqm | 640 ₹12,88,518.4 | 677 ₹13,63,010.87 | 614 ₹12,36,172.34 Lowest |
| 1.08 | M & L for RCC M-20 (Nominal Mix) type B1 1:2:4 (20 mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, Balconies, canopies, deck slabs and in shelves and the like all as specified and directed. | 186.66 | Cum | 7,725 ₹14,41,948.5 | 7,910 ₹14,76,480.6 | 7,651 ₹14,28,135.66 Lowest |
| 1.09 | M & L Formwork to rough finished flat surface soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work exceeding 200mm thick (Horizontal or sloping) with cover blocks all as specified and as directed. | 301.92 | Sqm | 640 ₹1,93,228.8 | 655 ₹1,97,757.6 | 576 ₹1,73,905.92 Lowest |
Tender Value
₹4.3 Cr
EMD Value
₹8.6 L
Closing Date
26 Jun 2025, 6:00 pmClosed
Col Antony Robins D
270 Engineer Regiment, PIN - 914270, c/o 56 APO
Supply and Construction of 35 x PDs
2025_ARMY_713821_1
3300/4158/25-26/OPW
Open Tender
Construction Works
Lump-sum
210 days
Dostpur/DBN/PG/DM/Chuchakwal and B Bet
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹8.6 L
Yes
Amritsar
7 Aug 2025
12 Jun 2025
27 Jun 2025
12 Jun 2025
26 Jun 2025
19 Jun 2025
13 Jun 2025 - 15 Jun 2025
17 Jun 2025
Amount
17 x RL PDs
Excavating over areas, n exc 1.5 m deep and getting out soft /loose soil all as specified and as directed.
Excavating over areas, exc 1.5 m deep ,n exc 3.0 m deep and getting out soft /loose soil all as specified and as directed.
M & L Cement concrete 75 mm thick in fdn type B-2, 1:2:4 (40 mm graded aggregate) complete as specified and as directed.
M & L for RCC M-20 (Nominal Mix) type B1 1:2:4 (20 mm graded aggregate) in Foundation, including rafts, footing, foundation beams, bases for column etc complete all as specified and directed.
M & L formwork to sides of rough finished flat surface of concrete foundations, footings, raft, bases of columns, plinth beams and similar work vertical or to batter with cover blocks all as specified and as directed.
M & L for RCC M-20 (Nominal Mix) type B1 1:2:4 (20 mm graded aggregate) in walls, retaining walls, basement walls, and the like, any thickness, above top of footings, including attached pilasters and buttresses all as specified and directed.
M & L Formwork to rough finished flat surface of Walls, pillars, posts, struts, piers, columns and stanchions with cover blocks all as specified and directed.
M & L for RCC M-20 (Nominal Mix) type B1 1:2:4 (20 mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, Balconies, canopies, deck slabs and in shelves and the like all as specified and directed.
M & L Formwork to rough finished flat surface soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work exceeding 200mm thick (Horizontal or sloping) with cover blocks all as specified and as directed.
M & L Formwork to edges of rough finished flat surfaces of roofs exc 20 cm wide with cover blocks all as specified and as directed.
M & L Brick work with subclass 'B' brick in parapet wall in CM 1:4 all as specified and as directed.
M & L Cement concrete type B1, 1:2:4, 20 mm graded aggregate in coping complete all as specified and as directed.
M & L for Mild steel TMT Bar 10mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips for stirrups all as specified and as directed
M & L for mild steel TMT Bar 12 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and as directed
M & L for mild steel TMT Bar 20 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and as directed
M & L Rendering 15 mm thick on wall in CM 1:4 on fair faces of bricks work or concrete surfaces complete all as specified and as directed.
M&L Integral water proofing compound
M & L Cement concrete 75 mm thick in flooring type B-2, 1:2:4 (40 mm graded aggregate) complete as specified and as directed.
M&L for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F for mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed. Make - SAIL/TATA/JSW/JINDAL/RINL.
S&F for 125mm Butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed.
S&F for 300mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed ® complete all as specified and directed.
M& L for preparation of new plastered surfaces of wall and applying two coats of synthetic enamel paint of apporeved colour and pattern over a coat of cement based primer complete all as specified and directed.
M & L Priming surfaces and applying bitumen as a primer in base of APP membrance completed all as specified and as directed
M & L APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) land on primed surface by forced application completed all as specified.
M& L for preparation of new MS surfaces of door and loop hole and applying two coats of synthetic enamel paint of apporeved colour and pattern over a coat of red oxide primer complete all as specified and directed.
Supply and fixing in Wall PVC (SWR) pipe 110 mm dia for rainwater drainage complete all as specified and directed.
Supply and fixing in trenches 80 mm dia GI pipe light grade with all fittings complete all as specified and directed.
M&L for filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. Complete all as specified and directed.
Returning, filling including spreading levelling and well ramming in layers not exc 25cm complete all as specified and directed
M & L Cement concrete 75 mm thick in flooring type B-2, 1:2:4 (40 mm graded aggregate) complete as specified and as directed.
MS Sun shades made of 0.60 mm PPGI sheet reinforced with ISA frame 35 x 35 x 5 mm and MS flat 35 x 3 mm will be provided above door opening. The minimum projection of sun shade shall be 450 mm and 300 mm wide than the opening. Sun shade shall be fixed in 20 degree downword slope and fixed with 8 Nos 12 mm dia 150 mm long nut & bolt in RCC wall including two coats of synthetic enamel paint of approved colour and pattern complete all as specified and directed. Make : SAIL/TATA/JSW.
18 x MMG PDs
Excavating over areas, n exc 1.5 m deep and getting out soft /loose soil all as specified and as directed.
Excavating over areas, exc 1.5 m deep ,n exc 3.0 m deep and getting out soft /loose soil all as specified and as directed.
M & L Cement concrete 75 mm thick in fdn type B-2, 1:2:4 (40 mm graded aggregate) complete as specified and as directed.
M & L for RCC M-20 (Nominal Mix) type B1 1:2:4 (20 mm graded aggregate) in Foundation, including rafts, footing, foundation beams, bases for column etc complete all as specified and directed.
M & L formwork to sides of rough finished flat surface of concrete foundations, footings, raft, bases of columns, plinth beams and similar work vertical or to batter with cover blocks all as specified and as directed.
M & L for RCC M-20 (Nominal Mix) type B1 1:2:4 (20 mm graded aggregate) in walls, retaining walls, basement walls, and the like, any thickness, above top of footings, including attached pilasters and buttresses all as specified and directed.
M & L Formwork to sides of rough finished squre rectangular or polygonal surface of pillars, posts, struts, piers, columns and stanchions with cover blocks all as specified and directed.
M & L for RCC M-20 (Nominal Mix) type B1 1:2:4 (20 MM graded aggregate) in slab supported on walls, beams and columns in floor, roofs, landings, Balconies, Canopies, deck slabs and in shelves and the like all as specified and directed
M & L Formwork to rough finished flat surface of concrete soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work exceeding 200mm thick (Horizontal or sloping) with cover blocks all as specified and as directed.
M & L Formwork to edges of rough finished flat surfaces of concrete roofs exc 20 cm wide with cover blocks all as specified and as directed.
M & L Brick work with subclass 'B' brick straight or curved on plan exeding 6Mtr mean radius built in parapet wall in CM 1:4 all as specified and as directed.
M & L for providing Cement concrete type B1, 1:2:4, 20 mm graded aggregate) in coping complete all as specified and as directed.
M & L for Mild steel TMT Bar 10mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips for stirrups all as specified and as directed
M & L for mild steel TMT Bar 12 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and as directed
M & L for mild steel TMT Bar 20 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and as directed
M & L Rendering 15 mm thick on wall in CM 1:4 on fair faces of bricks work or concrete surfaces complete all as specified and as directed.
M&L Integral water proofing compound.
M & L Cement concrete 75 mm thick in flooring type B-2, 1:2:4 (40 mm graded aggregate) complete as specified and as directed.
M&L for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F for mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed. Make - SAIL/TATA/JSW/JINDAL/RINL.
S&F for 125mm Butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed.
S&F for 100mm Butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed.
S&F for 300mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed ® complete all as specified and directed.
M& L for preparation of new plastered surfaces of wall and applying two coats of synthetic enamel paint of apporeved colour and pattern over a coat of cement based primer complete all as specified and directed.
M & L Priming surfaces and applying bitumen as a primer in base of APP membrance completed all as specified and as directed
M & L APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) land on primed surface by forced application completed all as specified.
M& L for preparation of new MS surfaces of door and loop hole and applying two coats of synthetic enamel paint of apporeved colour and pattern over a coat of red oxide primer complete all as specified and directed.
Supply and fixing in Wall PVC (SWR) pipe 110 mm dia for rainwater drainage complete all as specified and directed.
Supply and fixing in trenches 80 mm dia GI pipe light grade with all fittings complete all as specified and directed.
Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm. Complete all as specified and directed.
M & L Cement concrete in stairs in PCC 1:8:16 (40 mm graded aggregate) complete all as specified and as directed.
MS Sun shades made of 0.60 mm PPGI sheet reinforced with ISA frame 35 x 35 x 5 mm and MS flat 35 x 3 mm will be provided on door.The minimum projection of sun shade shall be 450 mm and 300 mm wide more than the opening. Sun shade shall be fixed in 20 degree downword slope and fixed with 8 Nos 12 mm dia 150 mm long nut & bolt in RCC wall including two coats of synthetic enamel paint of apporeved colour and pattern complete all as specified and directed. Make : SAIL/TATA/JSW.
MS Sun shades made of 0.60 mm PPGI sheet reinforced with ISA frame 35 x 35 x 5 mm and MS flat 35 x 3 mm will be provided on firing bay opening.The minimum projection of sun shade shall be 450 mm and 300 mm wide more than the opening. Sun shade shall be fixed in 20 degree downword slope and fixed with 8 Nos 12 mm dia 150 mm long nut & bolt in RCC wall including two coats of synthetic enamel paint of approved colour and pattern complete all as specified and directed. Make : SAIL/TATA/JSW.
Pioneer Traders (BID ID -3337260)
MAHAJAN EXPORTS & GENERAL STORE (BID ID -3337356)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .