ADDITION ALTERATION TO HMV PARKING SHED AT NT POOL COLABA MUMBAI PROVISION OF ROOF TREATMENT OF MARRIED ACCOMMODATION AT OUTLYING AREAS OF NOFRA SPECIAL REPAIR TO HARDSTANDING STROM DRAIN OF COMMON AREA AT NT POOL COLABA UNDER GE NW NOFRA COLABA MUM

Amount

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlarfacings, dressed stonework and precast concrete articles all as specified and directed.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

Taking down Chowkhats or frames but with shutters (without taking off shutters from the frame) not exc. 1.5 sq. m each all as specified and directed.

Taking down Chowkhats or frames but with shutters (without taking off shutters from the frame) exc 1.5 sq. m but n exc 4 sq. m all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard and dense soil all as specified and directed.

Material and labour For Plain Cement concrete 1:3:6 Type C-2 (Using 40mm Graded stone aggregate) in foundations, filling and mass concrete all as specified and directed.

Material and labour for RCC Nominal Mix (1:1.5:3) using 20mm graded agg as in footings, plinth beam and bases of columns all as specified and directed.

Material and labour for RCC Nominal Mix (1:1.5:3) using 20mm graded agg as in columns , piers posts and struts all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc. 25cm in soil all as specified and directed.

Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed all as specified and directed.

Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clipsall as specified and directed.

Material and labour for mild steel TMT bars 5mm dia and over upto and including 10mm diain stirrups, spacers and binders , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

Material and labour Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter all as specified and directed.

Material and labour for Formwork to sides of pillars, posts, struts, piers, columns and stanchions all as specified and directed.

Material and labour for Mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment of grade Fe 410-W (Gde-E- 250) quality-A all as specified and directed..

Material and labour for Mild steel Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections of grade Fe 410-W (Gde-E- 250) quality-A all as specified and directed..

Supply and fixing Mild steel screw bolts dia exc 12mm but n.exc 20mm ( Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut all as specified and directed.

Supply and fixing mild steel roof truss (framed) truss , purlins , rafter (beam,tee, angle, channel or flat) incl distance pieces work confirming to Fe-410-W (Gde-E-250) quality-A all as specified and directed.

Supply and fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, chajjas, fixed with self tapping screws all as specified and directed.

Supply and fixing Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in ridge of roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

Supply and fixing mild steel galvanised PVC coated wire netting to ceiling, dia of wire 2.50 mm & size of mesh is 25mm x 25mm fixed with 4mm dia GI wire & cleat complete including tightening of wire netting etc complete all as specified and as directed.

Material and labour for 100mm thick plain Cement concrete type B- 2, 1:2:4 (using 40mm graded aggregate) as in flooring provided in alternate bays and finished rough all as specified and directed.

Material and labour for Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing com?pound, Grade ‘A’ all as specified and directed.

Material and labour Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade-'A' all as specified and directed.

Material and labour for preparation of new steel surfaces exc 10 cm in width or girth and applying two coats synthetic enamel paint over a coat of red oxide primer all as specified and directed.

Material and labour for preparation of Old steel surfaces exc 10 cm in width or girth and applying two coats synthetic enamel paint over a coat of red oxide primer all as specified and directed.

Material and labour for brick work with sub class B brick straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Material and labour for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement, including forms mould, mi-tred/ stopped ends etc all as specified and directed.

Supply and fixing PVC (SWR) 160 mm bore pipes single socketed in any length with rubber ring joints, laid in trenches or floors, including taking down old u/s pipes, complete all as specified and as directed.

Supply and fixing 160 mm bore PVC (SWR) bends complete all as specified and directed

Refixing of 160mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including fixing clips & ht up to 15th floor of bldg, complete all as specified and as directed

Supply and fixing PVC (SWR) branch piece single T /Y equal or unequal of 160 mm bore upto 15th floor of bldg., complete all as specified and directed.

Demolition of existing treatment of any type and preparing the surface by cleaning the concrete surface with wire brush and a high pressure water jet and ensure that it is free of dust, oil grease, loose particles vegetation roots etc and filling cracks with polymer modifed mortar using smartcare RP or Epoxy mortar including Material and labour for laying padding cement concrete in terrace 1:2:4 type B-0 (using graded stone aggregate) of 50mm average thickness maintaining 1:30 slope finishing with 10 mm thick cement mortar 1:3 as specified and directed by Engr-in-Charge. Material & labour for High performance hybrid polyurea elastomeric waterproofing spray applied SmartCare Hypertron Hybrid liquid membrane with an elongation of 600% and tensile strength of more than 13 N/mm2 as per ISO 527 type 5 , shore A Hardness of min. 85 as per ISO 868, and crack bridging ability of 3.5 mm as per ASTM C1305. The system includes final base preparation, epoxy primer application and applying SmartCare Hypertron Hybrid or approved equivalent in two coats with a consumption of 2kg/sqmt, etc., complete as per Manufacturere specifications all as specified and directed.

Demolition of cement concrete in floors and pavings any thickness (below or above ground level), complete all as specified and as dirtected.

Material and labour PCC (1:2:4) type B-1 (20mm graded stone aggregate) as in padding concrete mixed with WPC to maintain slope towards drain pipe, finished even & smooth without using extra cement, complete all as specified. Note : (WPC measured and paid separately)

Material and labour for 10mm thick cement plaster in CM (1:4) mixed with WPC including finished even & smooth without using extra cement, complete all as specified. Note : WPC measured and paid separately

Providing water proofing treatment with five layered 4 mm thick APP (Atatic poly propylene) modified bituminous membrane re-inforced with non woven polyster mat of weight 180 gms/sqm as centre core and without multiple layers of polythene finished on top and bottom with 7 micron thick flammable polythlene applied by the thermo fusion using LPG finishing the treatment with one coat of bitumen and one coat of aluminium paint over APP membrane (An overlap of 100 mm & 150 mm shall be provided on sides ends respectively) Notes :- (i) Irrespective of lap the net covered area shall only be measured and paid (ii) The quoted rate shall be deemed to be inclusive of primer for APP membrane and SBR latex complete. (iii) The quoted rate shall be inclusive of one coat of aluminium paint & one bitumen coat @ 1.2 Kg/Sqm over APP membrane & finishing with two coats of solar reflective bituminous aluminium paint @ 0.10 Kg/Sqm as prescribed by manufacturer of membrane all as specified and directed.

Material & labour for cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed (with grey cement & no pigments) set jointed and pointed in neat cement slurry in floors over and including 15 mm thick bedding layers in CM (1:4) all specified and as directed.

Supply only water proofing compound all as specified and directed.

Material and labour for Preparing the surface by cleaning the concrete surface with wire brush and a high pressure water jet and ensure that it is free of dust, oil grease, loose particles vegetation roots etc and filling cracks with polymer modifed mortar using smartcare RP or Epoxy mortar and Supplying and applying single component, elastomeric, acrylic polymer based flexible cementitious elastomeric ( Dr Fixir New Coat Brushbond of Fosroc brand / Conipur M800 of BASF) membrane of about 1.5mm dry film thickness over a coat of primer as per manufacturers instrcutions , complete as per manufacturers specification. Consumption is 0.44ltr/sqm all as specified and as directed.

Material and labour cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges ,complete all as specified and directed.

Material and labour for repair to Spalling of concrete, damaged surface of RCC elements like beams, columns, wall, slab by removing all loose cement plaster/concrete, dust, oil, paint, grease, waterproof coating etc, Expose fully any corroded steel in the repair area and remove all scale and corrosion deposits , Apply rust remover for rust free bars, fix new reinforcemt if required, apply Dr. fixit Epoxy zinc primer over the cleaned rebars and allow it to dry before pouring of Dr Fixit micro concrete or equivalent , applying one coat of Dr fixit epoxy bonding agent before pouring of mix concrete, providing and laying of micro concrete at 20 to 40mm thickness by using the recommended water powder ratio mix the microconcrete with pan mixer as per manufacturer's instruction including watertight shuttering at any position including necessary curing and removal of debris outside MoD land complete all as specified and directed by Engineer-in-Charge. (New TMT Reinforcement if required shall be used and paid separately) Note : (i) Rate of rust remover, Epoxy zinc primer, Epoxy bonding agent and micro concrete is included in this item. (ii) Make -Dr Fixit/Build Core/Fosroc/Pidilite/ Krishna conchem

Taking up or down steel tubing and connections and removing from store of following sizes, complete all as specified and directed.

(a) 80 mm bore

(b) 40 or 50 mm bore

Supply and fix Steel water tubing galvanised medium grade (ISI marked) of following size, with all fittings fixed complete to walls and ceiling or laid in floor/wall/ ceiling (including scaffolding) complete all as specified and directed.

(a) 80 mm bore

(b) 50 mm bore

(c) 40 mm bore

Material and labour Disconnecting existing tanks of capacity exc 3000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position all as specified and directed.

Supply and fixing 3000 lit capacity rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top ) hoisted and fixed position all specified in SSR Part-I, with and including 50mm dia ball valve, high pressure of PTMT, with epoxy coated aluminium rod & high density plastic ball, minimum weight 210gm, screwed for iron pipes and fixed; including disconnecting and dismantling/ taking down of existing old unserviceable water storage tank upto16th floor of bldg./ terrace, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing as in repairs Gun-metal, globe or gate valves 50mm bore dia., with iron wheel head, screwed both ends for iron pipe and fixed over terrace complete all as specified and directed.

Supply and fixing as in repairs Gun-metal, globe or gate valves 25mm bore dia., with iron wheel head, screwed both ends for iron pipe and fixed over terrace complete all as specified and directed.

Supply and fixing as in repairs Gun-metal, globe or gate valves 80mm bore dia., with iron wheel head, screwed both ends for iron pipe and fixed over terrace complete all as specified and directed.

Taking down eaves gutters and rainwater pipes of any dia (any size or pattern ) including all fittings, heads, shoes, bends, swan necks etc (Measured overall as fixed along the centre line over fittings and accessories) & ht. upto 15th floor of bldg., complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

Material and labour for rendering 15mm thick cement plaster in CM 1:4 mixed with WPC on fair faces of brick work/concrete surfaces finished even and smooth without using extra cement.,complete all as specified and as directed. Note : WPC measured and paid separately

Preparation of new plastered surfaces of wall and apply two coats of Acrylic emulsion exterior paint of required shade : (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) and upto 5th floor of bldg., complete all as specified and directed.

Material and labour PCC 1:4:8 type D2 (40mm graded aggregate) as in foundation filling and mass concrete complete all as specified and as directed

Material and labour cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate as in coping of masonry wall including weathering slightly rounded or chamfered angles and throating as directed including necessary formwork ,complete all as specified and directed.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes door shutters with gusset plates, braces etc framed and hung as gates, including pintle hinges, stops,hand-made sliding bolts, etc. framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 290 Gd E-165 all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar all as specified and directed.

Material and labour 16 to 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over and including 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding and rounding all as specified and directed.

Material and labour for 100mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub bases, complete all as specified and directed

Material and labour for cement concrete interlocking paver blocks 60 mm thick having glossy finish M35 Grade (colour and pattern approved by GE) (tested as per IS 1237-1980) laid over and including 50 mm thick dry sand cushioning and voids filled with dry and surface compact, including compaction by means of surface vibrator & dismantling of old paver block, complete all as manufacture instructions all as specified and as directed.

Material and labour Chequered cement concrete tiles 20cm x 20cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors laid over 15mm thick screed in CM 1:6, including dismantlig of old tiles complete all as specified and direrected.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators,sockets,light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed

Material and labour for Point wiring complete with 1.5 sqmm single core multistranded FRLS PVC insulated sheathed copper conductors 1100 volts grade drawn through & including PVC condut not less than /20/25mm width, ISI marked with accessories concealed in wall/ceiling/truss including cutting chases, pinning in etc with PVC non metallic ISI marked terminal boxes concealed wall including one FRLS PVC insulated & sheathed multistranded green colour copper conductor 1.5 sqmm as earth continuity conductor connected to common earth as earth dolly for the following :-

(a) One light point controlled by one switch SP one way.

(b) One ceiling fan point controlled with one 5A switch

(d) One 3 pin socket outlet 5Amps on independant board.

(e) One 3 pin socket outlet 5Amps on same board with other switches.

Material and Labour point wiring for 15 Amps socket complete with 2.5 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through and including PVC pipe of size not less than 20 / 25 mm dia including PVC bend, tee joints etc as per site requirement, ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes / modular boxes surfacing on wall including one FRLS PVC insulated & unsheathed multistranded green colour copper conductor 4 sqmm as earth continuity conductor connected to common earth as earth dolly complete all as specified and as directed.

Supply and fixing Modular Switch , 6Amp, One way, 1 module, ISI marked Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (NIXON).

Supply and fixing Modular Socket , 6 Amps, 2/3 pin combined 3 module, ISI marked. Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (NIXON).

Supply and fixing Modular Switch Socket , 16Amps, 6 pin combined 3 module, ISI marked. Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (NIXON).

Supply and fixing Modular type, electronic fan regulator ( 5 step ), 120 Watts, 230 volts, 2 module, ISI marked complete all as specified and as directed. Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (NIXON).

Supply and fixing ceiling rose surface bakelite with ISI mark, flush type with ISI mark three terminals complete all as specified and directed. Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (NIXON).

Supply and fix Modular type, electronic fan regulator (5 step), 450 Watts, 230 volts, 2 module complete all as specified and directed . Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (NIXON).

Supply and fixing Modular white cover plate with Frame 6 Module, ISI marked. Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (WEGA)

Supply and fixing Modular white cover plate with Frame 8 Module, ISI marked. Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (WEGA)

Supply and fixing Modular metal flush box 6 module, ISI marked. Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (WEGA)

Supply and fixing Modular metal flush box 8 module , ISI marked. Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (WEGA)

Supply and fixing Submain wiring with proper colour coding, 2 single core FRLS 1100 volts grade cable with stranded copper conductor of size 4 Sqmm in and including PVC conduite of suitable size not less than20/ 25 mm , ISI marked including 1 single core cable with stranded copper conductor of size 4 Sqmm (green colour) for earthing. Note : 2 runs of 4 Sqmm cable, 1 run of PVC Conduit and 1 run of 4 Sqmm cable shall be measured as 1 Run complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulayor and accessories , 230 volts , 1200 sweep. Min air delivery 210 CFM with wervice value 6.0 BEE. Five star rated with brushles diret current motor complete all as specified and as directed.

Supply and fixing baton integral sleek extruded polycarbonate LED channel with white acrylic cover of 1x18WH with accessories internally prewired and incl connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make : Havells/Philips/Jaquar

Taking down old unserviceable DB / street light wall mounting as per site requirement demolished old shed / building complete all as specified and as directed .

Taking down old unserviceable XLPE cable in trench/ wall mounting as per site requirement demolished old shed / building complete all as specified and as directed.

Supply & fixing energy saving environment friendly and robust Industrial highbay integral LED IP 65 fittings of capacity 120 watt complete and all accessories at top of any height of workshop hanger including proper hanging fixing with angle/rond bar flat iron with clamping as good appearnce complete all as specified and directed by Engr-in-charge. Make- Havells lighting Cat No - BAYBRITESAUCERHBP 120 W LED 757 S60DTOLTG or its equivalent make in Philips / Jaquar/ Shakti.

Supply and fixing 12 way Double door type having protection IP-42, with 200 Amps rated bus bar connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as directed of comprising of the following :-

(a) MCB SPN 63 Amps, 240 Volts - 03 Nos

(b) MCB SP 6-32 Amps, 240 Volts - 30 Nos

Supply and lay PVC bedded, electric power flexible cables 1100 Volts grade with stranded copper conductor conductor of size 2.5 sq mm 2 core. laid in duct / along pole/wall etc including making connection complete all as directed. Note : The cost of Al thimbles/lugs/ junction box fro each floot light etc is incl in quoted rate and no extra payment will be made for it.

Supply and fixing HDPE of Pressure rating 6kg/sqcm pipe of 20 mm dia including necessary bends,elbows,Tees etc on cable protection complete all as specified and as directed

Supply and laying high density poly-ethylene pipes (HDPE) of pressure 6 kgf/cm2 pipe, 50 mm dia for laying of cable protection complete to walls/trenches/floor/ceilings all as specified and directed by Engr-in-charge.

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick ,buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth strip 32 x 6 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and as directed.

Supply and fix GI tubes Light grade of 40 mm dia complete with all fittings (like; union, tee, bend, elbow, reducer, socket) tobe fixed on wall and ceilings or laid in floors/trenches complete all as specified & Directed.-

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core. laid in duct / along pole/wall tc including making connection complete all as directed. Note : The cost of Al thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.

Shetty Construction Co

SHREE JAGDISH FURNITURE CO.

SN CONSTRUCTION

DHARICHHAN ENTERPRISE

BOB ENTERPRISES