Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.3 LAccepted-AOC | L1 | Accepted-AOC Accept | |
| 2 | L2₹4.4 L+₹6,154.35 (1.41%)Rejected-Finance 191 CHERAN THOZHILALAR COLONY 9TH STREET DHARAPURAM ROAD MU CHETTIPALAYAM TIRUPPUR 641 606 TAMIL NADU | TIRUPPUR | TAMIL NADU | 641606 | L2 | Rejected-Finance Highest |
| Sl No | Description | Qty | Unit | SUDHEKSHA CONSTRUCTION L1 | M/s. Hari Constructions L2 |
|---|---|---|---|---|---|
| 1.00 | Charges for conducting Geological survey | 1 | No | 2,500 ₹2,500 Lowest | 2,580 ₹2,580 |
| 2.00 | Drilling of 160mm dia vertical bore well in hard rock area using bore well rig including conveyance and erecting of rig and all labor charges etc | 200 | m | 330 ₹66,000 Lowest | 340 ₹68,000 |
| 3.00 | Supply and fixing of 200mm CS dia PVC casing pipe including cost of materials and all labor charges etc., | 18 | m | 1,148 ₹20,664 Lowest | 1,170 ₹21,060 |
| 4.00 | Supply and fixing of 200mm dia. PVC Borewell cover including alll labour chages and all T&P etc., | 1 | No | 405 ₹405 Lowest | 410 ₹410 |
| 5.00 | 3 HP Submercible motor
(Motor should give 50 lpm x 75m head) | 1 | No | 39,433 ₹39,433 Lowest | 39,500 ₹39,500 |
| 6.00 | 3 HP Panel board | 1 | No | 15,147 ₹15,147 Lowest | 15,200 ₹15,200 |
| 7.00 | 4.00 sq.mm submercible cable | 180 | M | 194 ₹34,920 Lowest | 196 ₹35,280 |
| 8.00 | 40mm dia ISI UPVC Pipe | 180 | M | 174 ₹31,320 Lowest | 178 ₹32,040 |
| 9.00 | 1000 litres capacity HDPE tank | 2 | No | 8,111 ₹16,222 Lowest | 8,150 ₹16,300 |
| 10.00 | 40mm dia.Non-Return Valve | 2 | No | 1,376 ₹2,752 Lowest | 1,400 ₹2,800 |
Tender Value
Refer Docs
EMD Value
₹5,330
Closing Date
13 Dec 2024, 3:00 pmClosed
Executive Officer
Town Panchayat Office Keeranur
Drilling of Bore well and water supply Arrangement at 15th ward Maduraiveeran kovil street and Comunity Toilet in Keeranur Town Panchayat
2024_DTP_508409_1
230/2024-2
Open Tender
Civil Works
Works
90 days
Keeranur
Class II
2 documents required · 2 mandatory
₹0
₹5,330
8 Sept 2025
7 Dec 2024
13 Dec 2024
7 Dec 2024
13 Dec 2024
7 Dec 2024
Amount
Charges for conducting Geological survey
Drilling of 160mm dia vertical bore well in hard rock area using bore well rig including conveyance and erecting of rig and all labor charges etc
Supply and fixing of 200mm CS dia PVC casing pipe including cost of materials and all labor charges etc.,
Supply and fixing of 200mm dia. PVC Borewell cover including alll labour chages and all T&P etc.,
3 HP Submercible motor (Motor should give 50 lpm x 75m head)
3 HP Panel board
4.00 sq.mm submercible cable
40mm dia ISI UPVC Pipe
1000 litres capacity HDPE tank
40mm dia.Non-Return Valve
40mm dia. Hex Nipple
40mm dia. GI Union
40 mm x32mmdia.GI Reducer
32mm dia ISI G.I. Pipe
32 mm dia. GI Ellbow
32 mm dia. GI coupling(Heavy)
25mm dia ISI G.I Bend
25mm dia ISI Gate valve
Adopter
Bore Kitty
40mm dia ISI Gate valve
25 mm UPVC Pipe
Supplying and fixing of32A aerial fuse unit for 3 Nos fuse units (500v) on suitable TW concelled box with hylam sheet on the tapping pole with necessary clamps. SD132
Supply and run of 4 of 6 sq.mm PVC insulated (Heavy Duty) SC unsheathed Cu.conductor of 1100 V Grade on 7/20 GI bearer wire for service connection mains(SD68)
Supply and run of 4 of 6 sq.mm PVC insulated (Heavy Duty) SC unsheathed Cu.conductor of 1100 V Grade in 32mm GI Pipe suitably bent at both ends with necessary angle iron upright and end supports for mains(SD73)
Supply and fixing of TNEB meter board suitable for 32A Three phase service connection with 32A fuse unit (500V) 32Aneutral link and earth link (1"X1/8"copper flat) on TW plank of size 600mmX450mmX19mm with supporting TW reepers of 1" tk.on either side (SD127)
Labour charges for errection of Submercible motor with panel board , pipes and cables etc.,
Plastering with C.M 1:5 12mm thick including cost and conveyance to site laying finishing curing etc., complete.
Supplying and fixing the Steel Door using MS Angle and flat including cost and conveyance of all labour charges.
Supplying and fixing in Position of Indian Oriya pan type water closet with “P’’ or “S’’ trap to set in brick jelly concrete 1:4:8 Mix concrete 10 cm thick using 20mm brick jelly and top finished with CM. 1:3 mix 20mm thick without any leakage etc. complete.
Supplying and fixing over the floors best quality of scratch Ceramic tiles of 30 c.m x 30c.m x 6mm size of approved colour laying with cement mortor 1:3 mix pointing the joints with colour pigments etc. Complete.
Painting new iron works such as steel doors, windows, rolling shutters, ventilators, window bars, balusters etc., with two coast best approved fresh quality and colour of synthatic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc complying with standard specification
Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification
M/s. Hari Constructions (BID ID -1207956)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .