Various repair/preparatory work in Polling station Part No. 7, 8, 9, 20, 21, 22, 23 and 24 of Panjim and Taleigao Constituency for General Election to the Corporation of the City Panaji 2026.

Supply of good-quality plastic bucket with mug (25-litre capacity) at polling stations for use by the polling staff. The same shall be handed over to the respective school/office after the conclusion of the election.

Supply of 20 ltr Mineral Water Containers with water bottle placed on stand including 100 paper glasses , tissue papers, dustbins for disposal of paper glasses etc complete. ( Rates to be coated for full job as described)

Cleaning / Sanitization of election booths, toilets etc. by sweeping, removing of cob webs, cleaning of floor / wall tiles usuing special floor cleaning solvents and sanitizing the area etc., complete as per the directions of engineer in charge. (Prior to election and after the election is concluded i.e. 2 times.)

Marking of Restricted area line (100 or 200 mtr line), 10cm width (2 times) around the polling booths with oil paint in two or more coats etc. complete as per directions of engineer in charge.

Providing Ramp with necessary gradient as per the site condition with 19 MM thick Marine ply supported on 19mm thick Marine ply frame work including all transportation, installation of same as directed by Engineer Incharge

Dismantling high stage wooden platform including with steel framework placed horizontally & vertically @ 0.6m C/C and covered with felt carpeting complete, complete as per the instructions of engineer in charge.

Providing & Fixing 40cm high stage platform made up of 19mm marine ply with Alluminium framework placed horizontally & vertically @ 0.6m C/C and covered with felt carpeting complete as per the instructions of engineer in charge. (All the above materials shall be of first quality).

Providing plan white or black cloth on hire basis for covering of windows, Almirah, Photos etc. at election booths.

Supply of labour

Supply of Carpenter

Supply of a Plumber.

Supply and Installation & Commissioning of Portable Cabins-HDPE type Features of Toilet:- a) Western Commode with 200 ltrs b) Wash basin with attached fresh water tank of 50 Ltrs Capacity. c) Flush/Tissue Paper holder provided inside toilet.

Cleaning of sewage chambers including removing the dry/wet sludge from the chamber and testing of the pipeline for free flow of sewage etc, Complete.

Cleaning of existing Water tank of 500/1000/2000 lit capacity with detergents, removal of dust, dirt etc. complete.

Providing and placing on terrace roof of floor two (1st flor roof single piece rotational moulded polythene water storage tank having I S I mark and conforming to I S 12701; 1996.;500 lit. capacity

Providing and fixing NICKEL chrome plated copper alloy Fancy long body bib cock with wall flance Jaquar make or equivalent. Confirming to IS 8931;1993;15mm nominal bore

Providing and fixing ASTM UPVC pipe conforming to ASTM 2467 with ISO 14001 including all UPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall.;SCH-40(blue)/(white);20mm outer dia.

Please Enable Macros to View BoQ information