COMPREHENSIVE PETTY REPAIRS INCL PLASTERING FLOORING TILES BRICK WORK ROOF AND OTHER CONNECTED WORK JOINERY WORKS UNDER AGE B R II AT MIL STN BIKANER

Amount

Taking down chowkhats or frame n exc 1.50 Sqm each with shutters (W/out taking off shutters from the frames).

Taking down chowkhats or frame exc 1.50 Sqm but n exc 4 Sqm each with shutters (W/out taking off shutters from the frames).

Taking down shutters of any description exc 1 Sqm & nexc 2 Sqm each.

Taking down shutters of any description exc 1 sqm but not exc 2 Sqm each, resecuring, easing and adjusting and refixing in the same opening.

S/F for pressed steel frames of size 125 X 60 mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6.

S/F for pressed steel frames of size 105 X 60 mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6.

All as per Sl item 4 above but of size 75 X 60 mm as in cupboard frames.

S&F 2nd class HW 35mm thick factory made panelled shutters with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Pt-I) kiln seasoned and chemically pressure treated.

S&F 2nd class HW 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauge etc (w/o sash bars)

S & F rubber gasket of thickness atleast 2.5 mm and width 60 mm for wooden doors to cover to gap between door and floor etc complete all as spd and directed by Engr-inCharge.

S & F 25 mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both sides.

S & F butt hinges medium weight cold rolled mild steel 100 mm long.

S & F for Al anodised barrel tower bolts, 200 mm long all as spd and directed.

S & F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.

S & F for Aluminium hasp and staple 100 mm size.

S & F for Aluminium handles, cast type anodised 150 mm long of D-shape all as specified.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fixed in opening as per specifications and making good the plaster of wall in CM 1:6 all as specified and as directed.

S & F factory made solid panel shutter (PVC) 30mm thick (Style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat molded plain colour PVC `C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement as per specifications.

S & F 100 mm aluminium Butt hinges, extruded aluminium alloy, with galvanised mild steel hinge pin, anodised and fixed, type B-21 and will be fixed to the frame with stainless steel screws with triangular head all as spd and dircted.

S & F Aluminium tower bolt 150 mm with stainless steel screws with triangular head complete all as spd and directed.

S & F aluminum anodized handle cast type D-shape of 125 mm size complete all as spd and directed.

M&L for PCC 1:3:6 type C-1 (using 20mm Graded Stone Aggregate) as in filling of Chowkhats.

S & F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

-do- here-in-before but fixed in repair.

Forming jambs, etc. in CM 1:4, to openings (to foregoing item), with stone supplied by MES including cutting, toothings and properly bonding into old work, including facing and pointing (if necessary) to match existing work, complete

S & F for box steel windows with both types of panel viz panel for fixing glass and panel for wiremesh incl all accessaries and ventilator (with bottom portion fixed with pin headed glass pane and top portion with two top hung shutter one with pin headed glass pane and other with wiremesh complete with mild steel stay etc) incl all accessaries all as spd and directed by Engr-in-Charge.

S & F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified.

S & F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified.

S & F steel window handle left/right 150 mm

Hacking out old broken glass (any thickness, size, quality or description) from from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing 3 mm thick glass pane complete all as specified.

S & F for 3mm thick ordinary sheet glass and glazing with oil putty in square nexc 0.5 sqm in each pane.

Do but pin head glass -ditto-

S & F 150 mm, ordinary rat tail rod pattern springs including roller and roller plate complete.

Taking down cement plaster incl raking out joints, hacking for key and scrubbing down with water.

M&L for rendering 15mm thick on fair faces of brick work or conc surfaces in cm 1:6 finished even and smooth w/o using extra cement.

–Ditto- but finished fair and even in cm 1:4.

–Ditto- but in CM 1:3 on ceiling but 5 mm thick.

Demolition of existing RCC chajja of any size and description and S & F sand 25mm to 35mm stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates, etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4 incl plastering all around in CM 1:4, complete all as specified.

Preparations of new or previously untreated surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer to wooden surfaces.

M&L preparation of new steel surfaces of any description, over 10 cm in width or girth, and applying two coats of synthetic enamel paint .

M & L for complete removal of existing treatment on wooden surfaces any description over 10cm in width or girth and applying two coats of synthetic enamel paint incl preparation of surfaces over and incl a coat of pink primer and finishing with wooden putty complete all as specied and directed.

M&L preparation of old steel surfaces of any description, over 10 cm in width or girth, and applying one coat of synthetic enamel paint incl preparation.

M & L two coats of oil bound distemper over a coat of suitable primer on walls incl preparation new plastered surface of walls and and applying two layer of wall care putty all as spd and directed.

M & L for two coats of oil bound distemper over a coat of primer incl two layer of wall care putty after complete removal of existing treatment all as specified and as directed.

M & L for one coat of white wash on ceiling incl preparation of existing surface all as specififed and as directed.

M & L for one coat of white wash on wall incl preparation of existing surface all as specififed and as directed.

M & L three coats of white wash on newly plastered surfaces of ceiling incl preparation of surfaces all as specified.

M & L for two coat of cement base paint over a coat of primer incl preparation of newly plaster surface complete all as specified.

M & L for two coat of cement base paint over a coat of primer incl complete removal of existing treatment all as spd.

Demolition in concrete of any description and in any position not otherwise specifically provided.

M & L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection.

M & L rendering 15 mm thick wall plaster in CM 1:3 even & smooth without using extra cement mixed with water proofing compound and application of two coat of Dr fixit Bathseal WPC (02 coats of 01 mm thick @ 1 litre per 6.97 Sqm or 75 Sqft).

Supply only water proofing compound. (Make: Dr Fixit Bathseal WPC).

M & L for applying a layer of hot blown bitumen of 85/25 penetration grade @ 1.20 Kg/Sqm incl cleaning the surface of roof or sunken etc complete all as specified.

M & L for polythene film, 400 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sq. m all as specified.

M&L PCC 1:5:10, type E-2 as in filling of sunken floors.

S & F for white Viterious China Wash down W/C pedestal pan and trap, including connections to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, incl seat and cover complete all as spd.

S & F in repair Vitreous China squatting pan “Orissa” pattern, size 580x440mm, white, with integral foot rests (excluding flushing cistern and flush pipe), with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti syphonage pipe etc, supplied and fixed in repairs, provision of lime concrete bedding minimum 150 mm thick ( Lime concrete ration 1:2:5) complete all as specified and as directed by Engineer-in-Charge.(Note :- (i) WC shall be ISI marked, 1st quality and of makes specified in Appendix ‘D’ (ii) Unit rate quoted shall also be deemed to include for provision of lead joint between CI trap and outlet pipe (iii) Unit rate quoted shall also be deemed to include for labour required for fixing of flushing cistern and flush pipe and also for taking down old flushing cistern and flush pipe. Supply only of flushing cistern with flush pipe shall be measured and paid for separately. (iv) The disturbed surface of floor shall be made good as per existing specification without any extra cost to the Govt. )

S & F PVC low level cistern 10 Ltr cap with inlet ball valve float and handle incl bracket and PVC flushing pipe 32mm dia 90 cm long (colour white) as in repairs.

S & F wash hand basin of size 550 x 400 mm vitrous China white flat back including brackets, waste coupling & PVC waste pipe of 32 mm dia all as specified.

S & F in repair sinks made of stainless steel 1.0 mm thick kitchen sink with drainage board, plugs washers and waste copling including bedding in cement mortar to dwarf wall or including supply and fixing cantilever brackets of MS angles and connecting union to 800 mm long PVC waste flexible pipe 40 mm dia, over all size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mm complete all as specified & directed.

S & F stainless steel plate rack of size 30"x36"x10" incl all accessories all as specified and as directed by Engr-in-Charge.

S & F in repair, PVC connections 45cm long with PTMT nut and washers on both ends.

S & F in repairs, 15 mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S & F in repairs, CP bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified.

S&F in replacement Bib tap, cast copper alloy Fancy type, CP, long neck with crutch or butterfly handle, screwed down, suitable for 15mm nominal bore iron pipe screwed for iron or brass ferrule and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F In repair bib tap 15 mm bore, high pressure of PTMT (Minimum weight 90 Gms) colour approver by Engineer in Charge, screwed for iron pipe complete all as specified and as directed by Engineer-in-Charge.

S & F 15 mm bore chromium plated angle cock cast copper allay, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes.

S & F in repairs, 15 mm bore chromium plated concealed type stop valves cast copper allay, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes.

S & F 20mm in repairs, gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed

ditto but 25 mm dia

S & F in repairs, Chromium plated 80 mm long shower rose with or without swivel joints, any size, incl fixing to steel pipe or union as in repairs.

S & F in repairs, tubular towel rail, brass chromium plated, 20 mm dia, D type, 60 cm long between flanges and fixed complete all as spd and directed.

Taking down or up GI tubing 15mm bore incl cleaning for refixing etc.

ditto but 20 mm dia

ditto but 25 mm dia

Refixing old steel tubing and connections in new or old position (wall, ceiling, floor etc) 15mm bore.

ditto but 20 mm dia

ditto but 25 mm dia

S&F GI tubing 15mm bore medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors 15mm bore.

ditto but 20 mm dia

ditto but 25 mm dia

Taking down rain water pipe any size incl all fittings.

S & F PVC 110 mm bore pipes 4.0 Kg/Sqcm single socketed in any length with rubber ring joints fixed to walls with stailess steel patti.

S & F PVC bends 110 mm bore any radius complete with PCC 1:2:4 base for supporting pipe and stainless steel clamps.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing etc. measured separately).

Dismantling water tanks and removing to store.

M & L for PCC 1:3:6 type C-2 (40 mm graded stoneaggregate) 75 mm thick & finishing the cement conrete surface even & smooth without using extra cement all as spd.

S & F PVC water tank 500 Ltrs including 20mm bore PTMT float valve.

S & F PVC water tank 1000 Ltrs including 20mm bore PTMT float valve.

S&F in repair Plastic seat cover lid only for PVC water storage tank of capacity 500 Ltrs (sample as approved by EIC) complete with locking arrangement & hinges complete all as specified and as directed by Engr-in-charge.

S&F in repair Plastic seat cover lid only for PVC water storage tank of capacity 1000 Ltrs (sample as approved by EIC) complete with locking arrangement & hinges complete all as specified and as directed by Engr-in-charge.

Dismantling floor,hearth or wall tiling including cement motor bedding (but not backing) removing serviceable to store and rubbish off the premises all as specifed and as directed by engineer in Charge. .

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L for PCC (1:2:4) type B-1, 25mm thick as in floors finished even and fair complete all as specified.

Roughening of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc

S&F non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floors, over and including 15mm thick screed in CM (1:4) set and jointed in neat cement slurry and pointed with white or coloured cement to match.

S&F non skid coloured ceramic tiles of 7 mm to 8 mm thick (square/rectangular) polished, area of each tile exc 0.18 not exc 0.38 sqm in floors, over and including 15mm thick screed in CM (1:4) set and jointed in neat cement slurry and pointed with white or coloured cement to match.

ditto as above but on vertical surfaces over and incl 10 mm thcik cement plaster in CM 1:4.

S&F glazed ceramic coloured tiles in vetical surfaces size 350x450x7mm thick, over & including 15mm thick screed in CM 1:4 set and jointed in neat cement slurry and pointed in white/coloured cement to match incl taking down old plaster.

Demolition stone slabs and tiles of any description or thickness in floors,apron etc laid, bedded and pointed in any mortar

M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. (Size of granite should be that maximum two piece to be fitted on the platform).

M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

Rounding to the edge of stone slabs on edge on cooking plateform

M & L for machine cut kota stone slab flooring 20-25mm thick over & incl cement screed base in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

ditto as above but on vertical surfaces over and incl 10 mm thcik cement plaster in CM 1:4.

S & F in repair stainless steel 20 mm dia drapery rod, decorative type complete all as spd and directed.

S & F mild steel bracket, decorative, superior quality, suitable for 20 mm dia drapery rods all as spd and directed.

S & F stainless steel grating suitable for 100 mm dia bore fixed with white cement with outer square frame, complete all as specified as directed by Engineer-in-charge .

S & F stainless steel grating suitable for 100 mm dia bore with hole fixed with white cement with outer square frame, complete all as specified as directed by Engineer-in-charge .

Dismantling strucural steel work including door gates but excluding framed truss etc

M & L for framed brackets of angles (As in cooler stand) cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, alongwith anchor bolt of length 150 mm long and not less than 10 mm diametre conforming to Fe 410-0 or Fe 310-0 all as specified.

Dismantaling of cast iron / AC /pvc pipe of size 75/100 mm med bore of size as specified as directed by engr-in -charge

S&F in repair PVC Pipe Pipe (SWR) for waste and vent pipe with or without ears, with cement joints fixed to walls, 75 mm dia.

S&F in repair PVC Pipe Pipe (SWR) for waste and vent pipe with or without ears, with cement joints 110mm dia laid in trenches.

S&F in repair PVC Pipe Pipe (SWR) branch pieces ,Double (equal or unequal ) ordinary or inverted (spigot or socket type) or with parallel branches 110 mm dia.

S&F in repair PVC Pipe Pipe (SWR) bends (any radius), disminishing pieces or tappers(larger bore measures), 110mm dia with access door.

S&F in repair PVC Pipe Pipe (SWR) bends (any radius), disminishing pieces or tappers(larger bore measures), 75mm dia with access door.

S&F in repair PVC Pipe Pipe (SWR) floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 1:2:4, 75mm dia.

S&F in repair PVC (SWR) Couplers for 75 mm bore pipe

S&F in repair PVC (SWR) Couplers for 110 mm bore pipe

S&F in repair PVC (SWR) reducers for 110 mm bore pipe larger bore measured

S&F in repair PVC (SWR) 110 mm bore P traps

S&F in repair Stack clamp out of 50mm x5mm flat iron stays including bolt and nuts and securing ends of stays to walls or roof for 75 mm bore piece.

S&F in repair Stack clamps made out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100mm bore complete all as specified.

Dismantling of Roof tiles of any description or thickness in floor, roof, apron etc laid, bedded and pointed in any mortar complete.

Demolition of lime concrete of any description over roof slab complete all as specified by Engineer-in-Charge.

M & L for 10 mm thick screeding in cement mortar 1:6 on concrete surfaces, finished fair & even including mixing water proofing compound as per manufacturer's instructions complete. (WPC shall be measured separately as supply only) all as specified.

Supply only liquid water proofing compound ISI Mark complete. Make: Dr. Fixit or Equivalent.

M&L applying priming coat of cold bitumen primer at the rate of 0.40 Ltrs per Sqm as per para 11.44.5 of MES SSR Part-I incl cleaning and preparing the surface complete all as specified.

M & L APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. Not less than 150 gms/sqm) land on primed surfaces by forced application complete all as specified.

M & L for lime concrete terracing as on roof with mimimum thickness of edge 40 mm and increasing uniformly towards ridge to obtain a certain chain slope of (1:40) as described in para 11.27.2 of MES SSR part-I complete all as specified. NOTE:- For lime concrete, mudia kankar (source : NAL) and Kolayat coarse sand in lieu of brick aggregates and Surkhi respectively as specified in MES schedule Part-I shall be used.

M & L 40 mm thick brick tiling on 15 mm thick screed bed in CM 1:6 and joints grouted flush in CM 1:3 mixed with integral water poofing compound

ditto complete all as per Item No 8 above but except tiles complete all as specified.

M& L flush pointing in cement mortar 1:3 on roof tiles including removing all loose and old pointing from the old brick tiles complete all as specified and as directed by engineer in charge.

M & L for precast concrete slab in cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregates set and jointed in CM 1:4 complete all as specified and directed.

S & F mild steel TMT bars 6 to 8mm mm dia cut to length, bent to shape required, including cranking, bending spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed by Engineer-in charge.

S & F in repairs, GI plain wire of 3.15 mm dia all as specified.

S & F SS cloth hanger with atleast 5 nos hook in each hanger all as specified and as directed.

Demolition of brick work built in cement mortar including all quions arches pillars etc

M & L for brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified.

Excavation in trenches , n exc 1.5m wide and n exc 1.5m in depth for wall foundation etc or for shaft, well, cesspits, manholes, pier holes etc n exc 10 sq m on plan and n exc 1.5m in depth and getting out in soft/loose soil

M&L PCC 1:4:8 Type D2 using 40 mm thick greded stone aggregate as in foundations,filling and mass concrete complete all as specified.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified.

Removing excavated material n.exc 50 mtr & depositing where directed at a level n.exc 1.5 mtr above/below the starting point.

M & L concrete bed to drain pipe in PCC 1:4:8 type D2 using 40mm graded stone aggregate incl packing under and hunching against sides of pipe after they are laid on slope and tested for 150mm dia bore sewer pipe line ( earth work excavation and sewer pipe line will be measured and paid separately) complete all as specified.

Supplying and laying salt glazed stoneware pipe confirming to IS 651-1972 in tranches and jointed in cement mortar 1:1 complete all as shown on drawings for 150mm internal dia of pipe ( excavation and earth work measured separately)

Demolition of RCC of any description and in any position not otherwise specifically provided for complete all as specified.

M & L for RCC M-25 (20 mm graded stone aggregate) as in stairways (except spiral staircases) including steps (square or spandril), string pieces, carriages, etc., complete, any section straight or winding, but excluding landings; RCC water tanks upto 1500 litres complete all as specified.

S & F in repair 250 mm long sliding door bolt, plate type, mild steel, stove enamelled black with bright bolt of not less than 12 mm dia with & including a minimum of six bolts and nuts, four on bolt plate and two on staple plate, ISI marked complete all as specified and as directed by Engineer-in-Charge.

S & F in repair 150 mm long, mild steel, barrel tower bolt, stove enameled black with bright bolt, ISI marked complete all as specified and as directed by Engineer-in-Charge.

S & F in repair 150 mm size mild steel, stove enamelled black, pressed handles, oval type, ISI marked complete all as specified and as directed by Engineer-in-Charge.

Dismantling timber scantlings in fillets rails posts rater under 40 Sqcm and over in section.

M & L second class hard wood in scallting of clean swan wood for frame and fixed with nails and screw as directed by eng-in- charge .

Dismantling boarding in any description fixed in any position with nails/screw all as specified and as directed by Engineer-in-Charge.

S & F Prelaminated boards 19 mm grading 2 quality interior garde commercial type for cup boards fixed with screw to timber frame work with decorative film mica face veneer on both side face with proper cover fillet of standard hard board 4. 5 mm thick bording plain on side with butt joints with including complete block complete all as specified.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with flap of hinge ( when open 30 mm) complete all as specified.

S&F Hasp and staple 100 mm aluminium anodised, safety type with mild steel hinges pin including bolt to hinges plates and fixed with screws complete all as specified and as directed by Engr-in-Charge.

S&F Cup board knob mild steel 40mm dia complete all as specified and directed by Engr-In-Charge fixed in repair complete all as specified.

S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified.

S&F in repair 30 mm thick Flush shutters for door solid core construction, with block board core, and ply wood face panels with lipping to match complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 150 mm Floor door stoper of aluminium alloy and insulation and tounge, anodised with`hard steel spring in floor complete all as specified and as directed by Engineer-in-Charge.

S & F in repair 450X300 mm cabinet mirror 5 mm thick of high quality glass ,seamless finish, light weight, high strength complete all as specified and as directed by Engineer-in-Charge.

M&L running welding in repairs with thickness of metal not exc 6 mm including provision for stopper of peg stay steel handle fitting complete all as specified and directed by Engineer-in-Charge.

M&L welding in repairs not exc 2.5 cm in length and not exc 6 mm thick of metal complete all as specified and directed by Engineer-in-Charge.

S&Fin repair 40 mm sink waste coupling for WHB sink with fixed in repair complete all as specified and as directed by Engineer-in-Charge.

S&F waste pipe 32 mm for WHB with fixed in repair complete all as specified and as directed by Engineer-in-Charge.

S&F 40 mm kitchen sink waste coupling for kitchen sink with fixed in repair complete all as specified and as directed by Engineer-in-Charge.

S&F pvc waste pipe 40 mm for kitchen sink with fixed in repair complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Spray jet, brass chromium plated, with and including 1.5 metre long PVC flexible reinforced pipe for EWC, for bore dia of pipe 15mm,complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Brass chromium plated wall mixer non telephonic for mixing hot and cold water screwed down for iron pipe 15 mm bore complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Brass chromium plated WHB mixer non telephonic for mixing hot and cold water screwed down for iron pipe 15 mm bore complete all as specified and as directed by Engineer-in-Charge.

S & F for Health faucet, brass, chromium plated, heavy duty, including flexible pipe suitable for 15mm bore water connection; for EWC

S & F 4mm dia galvanised steel wire, 150x100mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete all as specified.

M&L Aluminium anodised powder coated (Minium thickness of powder coating shall be 50 micron) frames for chowkhats and shutters, windows, ventilators with one or more rebate including joining cleats for fixing etc complete

M&L 5mm thick Sheet glass (Plain/black tinted), ordinary quality in square of any required size complete all as specified.

S & F Aluminium extruded section Door closer hydraulically regulateld, designation No. 01 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35kg and fixed.

S & F Mortice lock, vertical type, size 100mm ,4 levers brass metallic complete all as specified.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

M & L rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc ., conferming to Fe-410 W (Gde E-250) and fastening and fixing complete.

SUBHAM ENTERPRISES

ALPHA ENGINEERING COMPANY