PROVN OF CHAIN FENCING AT VARIOUS PLACES AND PROVN OF HARD STANDING NEAR P-101

Amount

Excavation in post holes (or similar joles) not exc 0.5 Cum and getting out in hard/dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm and removing surplus soil to a distance not exc 50 mtr and making good surfaces etc complete all as specified and as directed by Engr-in-Charge.

Dismantling posts or struts (wood, steel, RCC) any section posts embeded in concrege, brick work, masonry etc , including taking out embeded portion and making good disturbed ground

M & L for PCC 1:3:6, type C2 (using 40mm graded stone aggregate) in foundation, filling and mass concrete etc complete and as directed by Engr-in-Charge.

Dismantling of fencing wire mesh any type

S & F mild steel work as in angle iron , Tee etc as in posts & strut in fencing including cutting tops to shape, drilling holes notching for wire etc flat iron fillets for securing wire mess etc including all necessary drilling, bolting or riveting etc and similar works conforming to Fe-410-0 or Fe-310-0 (Make- TARA/ANJANI/or equilivalant

S & F chain link galvanized steel wire 4mm dia made of galvanized wire fencing including line wire of mesh size 75x75 mm diamond square type of stranded rails, straining bolts etc. including provision of binding wire complete all as per IS:2721:1979 and fixing mild steel to angle iron fencing posts all as directed.

Fixing only in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed

Supply and fix 610 mm dia CONSEC-ZAL Super Razor punched Barb Tape (SRBT) Aluminium base helix coil with and including necessary GI fixing clips for securing complete all as specified and as directed with following specifications :- (i) Dia of coil (unstretched) - 610 mm (ii) No. of circles - 51 turn per coil.(iii) Weight of each coil with hessain pack - 8.50 Kg (+ 0.50Kg ) (iv) Coverage per coil - 8 RM (v) Central core wire - Made from 2.60 mm dia GI - HTSS wire as per IS- 4454 galvanised as per IS -2629 .(vi) Razor punched strip Razer punched tape is CONSEC-ZAL steel comprising of aluminium base with zinc alloy @ 150 gm/Sqm conforming to ASTM A-792/A-792M with additional primer treated of Epoxy/Polyurethane and final paint top coat of Caulified green shade ( BSL -139 ) by Hot Dipping process .Note :- Running length of the wall shall be measured for the payment purpose.

Supply and fix Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed

M&L for mild steel TMT bars 10mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified & directed.

S&F of Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to fe 290 grade E165

M&LBrick work with flyash 'B' bricks straight or curved on plan exc 6 mtr mean radius in half brick thick wall built in cm 1:4 with old size bricks

M & L for brickwork with subclass Flyash bricks, straight or curved on plan exc 6m mean radius built in Cement mortar 1:4 as in man holes all as specified and directed.

M&L for Rendering 10mm thick on fair faces of brick work or stone wall surfaces in CM 1:4 and finished even and smooth (without using extra cement) etc complete all as specified and as directed

Preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer etc complete.

M & L for preparation of new plastered surfaces and applying two coats of white wash on wall.

Excavation in trenches n. exc 1.5 m wide and n. exc 1.5 m depth and getting out in Hard dense soil complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick using soil obtained from excavation complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) mass concrete complete all as specified and directed.

M&L for extra form farming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds ,mitred stopped ends etc.

M&L for Brick work with fly ash bricks, straight or curved on plan exc 6 meter mean radius built in cement mortar 1:6 as in manholes complete all as specified and directed.

M&L for PCC 1:3:6, type C1 (using 20 mm graded stone aggregate) for coping and benching inside the manholes including weathering, slightly rounded or chamfered angles and throating and including necessary formwork complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick wall surfaces, finished even and smooth using extra cement complete all as specified and directed. .

M&L for Cement concrete Type C2 1:3:6 (40 mm graded graded)in surface channels and drains

Surface excavation not exc 30cm deep and averaging 15 cm deep and getting out in hard/dence soil.

M&L hardcore of gauge not exc 63 mm deposited spread and leveled in layers not exc 15 cm thick watered and rammed to a true surface .

M&L 75 mm thick PCC (Plain cement concrete) type D-2 1;4;8 (40 mm graded aggregate ) as in sub base.

M & L for Machine Pressed Precast rubbermoulded concrete interlocking Paver Block any shape, size,colour or design, confirming to 15658-2006 of 60mm thickness, M-30 Grade including M -sand filling under paver block including watering,consolidation nd leveling in layers n exc 25cm thick and all as specified and directed .

S&F of Framed work such as grills, gratings, framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etcetc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of conforming to Fe.290.Gde-E-165

S&F galvanised tube 100mm dia medium grade fixed with all fitting and complete laid in floors as catle trap and all as directed

S&F galvanised tube 75mm dia medium grade fixed with all fitting and complete laid in floors as in catle trap and all as directed

Removing off excavated soil/material out side the campus including loading and unloading etc., to a distance exc 5.0 Km but not exc 10.0 Km out side the MD land. Note: Responsibility of getting permission from concerned authority for disposal off and place of depositing the debris outside MD land and rests with contractor under his own arrangements.

Rajapriyaconstruction

TECKXPERT ENTERPRISES

Sri ASK Constructions

SARASWATHI CONSTRUCTION

R K BUILDERS

p.chinnasamy