Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.6 LAccepted-AOC 77 BHULLAR AVENUE FGC ROAD AMRITSAR 143001 | AMRITSAR | PUNJAB | 143001 | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹22.9 L+₹3.0 L (15.0%)Rejected-Finance | L2 | Rejected-Finance HIGHER | |
| 3 | L3₹23.3 L+₹3.4 L (16.8%)Rejected-Finance | L3 | Rejected-Finance HIGHER | |
| 4 | L4₹23.9 L+₹4.0 L (19.8%)Rejected-Finance | L4 | Rejected-Finance HIGHER | |
| 5 | L5₹24.6 L+₹4.7 L (23.4%)Rejected-Finance | L5 | Rejected-Finance HIGHER |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
27 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Amritsar
GE Amritsar PIN-143001
CERTAIN REPAIR TO OTM ACCOMODATION OF DIV HQ, DEF AND EME COY , EME BN, FD WKSPs, ELIENT AND FS SECTION AT AMRITSAR CANTT
2022_MES_533153_1
GE/ASR-24/2022-23
Open Tender
Civil Works
Item Rate
150 days
GE Amritsar
Class D, Category ai
8 documents required · 8 mandatory
₹500
GE Amritsar
₹60,000
Yes
12 Dec 2022
23 Jun 2022
28 Jul 2022
23 Jun 2022
27 Jul 2022
8 Jul 2022
60 days
Amount
Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:6 finishing even and smooth without using extra cement including taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc; complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4 finishing even and smooth without using extra cement including taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc ; complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces on ceiling in CM 1:3 finishing even and smooth without using extra cement including taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc ; complete all as specified and as directed by Engineer-in-Charge.
Demolition of brickwork, built in cement mortar including all quoins, arches, pillars, etc. ; complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:6 ; complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for brick work but except bricks (old dismantled serviceable bricks obtained from Srl item No 5 shall be reused after necessary cleaning of mortar) straight or curved on plan exc 6 m mean radius, built in CM 1:6 ; complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, as in half brick thick walls and built in CM 1:4 ; complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for applying two coats of whitewash on walls including preperation of newly plastered/old decorated surfaces ; complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for applying two coats of whitewash on ceiling including preperation of newly plastered/old decorated surfaces ; complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of newly plastered surface of walls and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 Kilogram/10 sqm) ; complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of newly plastered surface of walls and Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work ; complete all as specified and as directed by Engineer-in-Charge.
Material and labour preparation of newly plastered surface of ceiling and Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work ; complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of old plastered surface of walls applying plaster of paris putty of 1 mm thickness , with & including complete removal of existing treatment to prepare the surface even and smooth ; complete all as specified and as directed by Engineer-in-Charge.
Material and labour preparation of newly plastered surface of walls & Finishing walls with textured interior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of interior primer applied @ 2.20Kilogram/10 sqm complete all as directed by Engr-in-charge.
Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames ; complete all as specified and as directed by Engineer-in-Charge.
Taking down Chowkats or frames from the opening of size exceeding 1.5 Sqmtr but not exceeding 4 Sqmtr each with shutters ( without taking off shutters from the frames) ; complete all as specified and as directed by Engineer-in-Charge.
Taking down Shutters of any description of size not exc 1sqm each ; complete all as specified and as directed by Engineer-in-Charge.
Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each ; complete all as specified and as directed by Engineer-in-Charge.
Taking down Shutters of any description of size exceeding 2 sqm each ; complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for Box type steel window made of ERW tube P- section of size 60 mm x 25 mm double rebated outer frame, comprises glazed skelton & gauzed shutter of ERW tube P-Section size 50mm x 20mm with one/two Nos openable leaf for each shutter consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast etc as given below all as shown on drg No CEJZ/TD-1020/08 Sh 1/3 to 3/3 dt 01 May 2008 ; complete all as specified and as directed by Engineer-in-Charge.(a) Hold fast 150mm long of 12mm x 3mm MS flat - 4 Nos per Window.(b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf.(c) MS tower bolt 150mm long - 02 Nos/leaf.(d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf.(e) Cleat 55mm long of hollow square 15mmx12mm - 02 Nos per leaf.(f) MS pintol hinges size 75mmx12mm - 2 Nos per leaf Note :- Sheet glass, wire mesh and painting shall be measured and paid sperately.
Material and Labour for Box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame ( single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass including fixture and fittings like as Stopper, Cleat, Pintal hinges, holdfast etc all as shown on drg No CEJZ/TD1019/08 sheet 1/3 to 3/3 dt 01 May 2008 ; complete all as specified and as directed by Engineer-in-Charge.. NOTE:-Sheet glass and painting shall be measured and paid Separately.
Supply and Fixing for pressed steel frames 1.25mm thick for door size of frame 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges ; complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) in bed blocks for hold fast & similar work etc ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing for Second class hard wood Glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing for Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing in repair Helical door spring 300mm, ordinary rat tail rod pattern springs, including roller and roller plate fixed to iron chowkats with weilding ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing factory made 30 mm thick flush shutters solid core construction with block board core and plywood face panels ; complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for two coats of synthetic enamel painting on wooden surfaces of any description over 10 cm in width or girth not otherwise described above pink primer including prepration of previously untreated of new surfaces surfaces ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing 300mm long Aluminium alloy, Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing Aluminium, anodised, barrel tower bolts 150mm of extruded section and fixed ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing 150mm long Aluminium handles, cast type anodised ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing stainless steel butt Hinges, 100mm size, medium weight, cold rolled mild steel ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing clear glass, 3mm thick ordinary quality, in any shape, not exceeding 0.50 sqm in each pane including and glazing with oil putty/wooden beading as per site requiremnets , including hacking out old broken glass from wooden/ steel window cleaning the surface and removing from the site ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing clear glass, 3mm thick ordinary quality, in any shape, not exceeding 0.50 sqm in each pane including and glazing with oil putty ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing Solid PVC Door Frame of Size 50mm x 47mm made out of 5mm plain colour PVC Sheet reinforced with MS Square tube in opening as per specification and drawing ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing 28 to 30 mm thick (Rajshri brand) factory made solid PVC moulded Door shutter with 2,3 or6 raised psnel design with 2mm thick moulded PVC Sheet on the front face and 2mm plain colour PVC Sheet on back face, fixing in frame at site as per specification and drawing ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing powder coated aluminium frame for doors ,windows, ventilators with one or more rebates including joining cleats for fixing complete all as specified and directed by Engineer-In-Charge.( Min. thickness of powder coating 50 micron)
Supply and Fixing powder coated aluminium glazed shutter(for doors) Al-section weighing 0.55 Kilogram/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading. ( Min. thickness of powder coating 50 micron) ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing Aluminium powder coated (of any colour) window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 Kilogram/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified .(Min. thickness of powder coating 50 micron)
Taking down aluminium door shutters of area exc 1 sqm but n.exc 2 sqm each and replacement of necessary jointing cleats glazing clips, rubber packing, anodised aluminium snap beading screws etc and refixing in the same opening ; complete all as specified and as directed by Engineer-in-Charge.
Taking down aluminium door shutters of area not exc 1 sqm each window shutters and replacement of necessary jointing cleats glazing clips, rubber packing, anodised aluminium snap beading screws etc and refixing in the same opening ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing Sheet glass, 5.5mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beading with and incl solar control film 25 Micron reflective type sticked to glass panes as per instructions of manufacturer ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing in repairs door closer hydraulically regulated, (Alminium die cast body) designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kilogram and fixed ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 150mm ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing in repairs Brass mortice lock, 4 levers, verticle type, size 100 mm, ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing in repairs Brass mortice lock, 2 levers, verticle type, size 100 mm, ; complete all as specified and as directed by Engineer-in-Charge.
Dismantling structural steel work including doors, gates but excluding framed truss etc ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing framed work as door, chowkhats, and Grill gates of angle frame work fixed with Nut & bolt to wall or other section complete drilling or fixing welding be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also festering and fixing ; complete all as specified and as directed by Engineer-in-Charge.
Material and Labour two coats of synthetic enamel painting on steel surfaces of any description over 10 cm in width or girth not otherwise described above priming coat of red oxide including prepration of previously untreated surfaces ; complete all as specified and as directed by Engineer-in-Charge.
Material & Labour in repairs stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement ; complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repairs toughned glass 12mm thick as in hinged door, partitions automatic doors and similar work including cutting to shape, drilling holes and all necessary items as required ; complete all as specified and as directed by Engineer-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 & ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing glazed ceramic coloured tiles 450x300mmx6mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface ; complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for Vitrified ceramic light shade tiles 10mm thick (Square/ rectangular) polished, area of each tiles n.exc 0.36 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of cement mortar(1:6) 15mm thick for laying floor finishes ; complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for Vitrified ceramic light shade tiles 10mm thick (Square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of cement mortar(1:6) 15mm thick for laying floor finishes ; complete all as specified and as directed by Engineer-in-Charge.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.Laid, bedded and pointed in any mortar ; complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for Machine cut Kota stone slab flooring 20-25 mm thick (size not less than 0.5 sqm each) over cement screed base of 15mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing ; complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for Machine cut Kota stone as in skirting/dado 20-25 mm thick (size not less than 0.5 sqm each) over cement screed base of 10mm thick in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing ; complete all as specified and as directed by Engineer-in-Charge.
Material and Labour Granite (of any type) work (table rubbed and polished) 20mm thick in steps , jambs, pillars, window cills, cooking plateforms and like in cemnet mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in CM 1:4 ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing in repairs vitreous China Squatting pan 'Orrisa' pattren size 580x440mm white with integral foot rest and PVC(SWR) 'P' trap 110/110mm bore Note:-Rate of supply for Flushing cistern, flush pipe, seat cover etc have been taken separately ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing in repairs Vitreous china wash down water closet pan( pedestal pattern), white with PVC(SWR) 'P' trap 110/110mm bore ; complete all as specified and as directed by Engineer-in-Charge. Note:-Rate of supply for Flushing cistern, flush pipe, seat cover etc have been taken separately.
Supply and Fixing in repairs 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve flote handle including bracket and flush pipe of polythylene of low or high density or PVC,32mm dia ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing in repairs Plastic water closet seat,white/ivory,closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device (Toilet Seat Cover) ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing in repairs PVC Jet spray suitable for EWC ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing in repairs Chromium plated Health faucet in repair with 1.5 metre long chain ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing in repairs vitreous China wash basin white,flat back size550x400mm including PTMT waste coupling 32mm bore,waste PVC pipe complete, CP brass Pillar Tap 15mm bore of fancy type ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing in repairs glass shelve assembly 60cm in oval shape consisting 5.5mm to 8mm thick glass including CP guard railing with double rail ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing in repairs Sheet glass corner shelf assembly consisting of 5.5mm thick sheet glass corner shelf with chromium plated bracket guard and railing.
Supply and Fixing in repairs PVC connection 15mm size with PTMT nuts of length 600mm ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing in repairs vitreous china urinal half stall type with CP spreader white incl CP waste coupling with grating and union fordischarge pipe, including providing and fixing plug, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement fixing with brackets, flush pipe, grating and union for discharge pipe ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing in repairs Vitrous china urinal partition white of size 310x770mm and fixed to wall terminating about 40cm above floor line ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing in repairs 15mm bore Concealed type stop cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing in repairs 15mm bore type angle cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing in repairs of brass cromium brass plated fancy type bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing in repairs Pillar taps 15mm bore, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe and fixed ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing in repairs PVC waste pipe 32mm dia fixed to WHB/Urinals ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing in repairs 100mm dia CP grating with or without hole type ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing in repairs CP brass towel rail of 20mm dia and 600mm long ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing in repairs 125mm CP shower rose fancy type with CP arm ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing in repairs Vitrous china white (Box type) toilet paper holder fixed to walls with chromium plated (CP) brass screws ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing in repairs 15mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors including taking down ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing in repairs 20mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors including taking down ; complete all as specified and as directed by Engineer-in-Charge.
Demolition of cement concrete of any description or in any position and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas ; complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in flooring Finishing fair and even ; complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for cleaning of dust & dirt , Removal of all loose existing bituminous material or with chipper & applying heat torch gun to get smooth plain finished surface. Repair all joints & cracks with Highly Elastic bituminous Cold applied Putty-Tarplast- having penetration after setting upto 8mm & confirming to IS 1580:1991. Any annular space between drain pipe and concrete should be filled with mortar admixed with ShaliSBR latex of STP Ltd. Making necessary Gola 75x75 mm with rich cement mortar admixed with ShaliSBR latex of STP Ltd at the interface of horizontal & Vertical junctions ; complete all as specified and as directed by Engineer-in-Charge.
Material and Labour Slightly damp the surface, avoid standing Water. Prime the surface with Tarfelt LM mixed with potable water in the ratio 1:1 and apply @ 400gm/sqm (as per surface condition). Allow the primer to touch dry in tacky position in open atmosphere. Thenafter apply 1st coat of Tarfelt LM (Liiquid membrane) having elongation 200% confirming to ASTM-C-412 & bridging of 8mm confirming to ASTM-C-836 with tensile strength after 7 days 0.5mm confirmin to ASTM-C-412 with no diluation of water on primed surface is still tacky with consumption of 0.7 Kilogram/sqm. lay Geotex of 45 GSM/Fibre mesh simultaneously and paste it properly with overlap of 50mm. Allow the first coat to dry for 10-12Hrs. Apply 2nd coat of cured first coat with consumption @ 0.7Kilogram/sqm in opposite dierction of first coat by Brush or roller. Sprinkle sand @ 200Gm P/Sqm while the coating is stick to facilitate plastering for protection screed. Allow it to dry for 10-12 hrs . Apply 3rd coat if required as per site reqirement. Providing & Laying minimum 50mm PCC in slope with welded wire mesh 1.5 mm as reinforcement and PCC admixed with Shallplast LW+ of STP Ltd (Integral Waterproofing compound) @200 ml per bag of cement on horizontal surface for mechanical protection over a separation layer of ShallGeo Textile 120 gsm in client Scope ; complete all as specified and as directed by Engineer-in-Charge.
Dismantling boarding , any description , fixed in any position with screws ; complete all as specified and as directed by Engineer-in-Charge.
Material and Labour Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre ; complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Gypsum board 12 mm thick in false ceiling fixed with screws to anodised Aluminium snap grid (size of grid 605mm x 605mm) including hanging withh GI hangersof 6mm dia (upto 1.2m length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x 3mm size 60mm long and expansion hpld fasteners 12.5mm dia 40mm long ; complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for Anodised aluminium snap grid Size of grid 605 x 605mm frame work for false ceiling ; complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing in reapair 25mm dia stainless steel Curtain rods/ rails, with brackets, stops, rollers, finials, 1 pair of decorative knobs for each curtain rod etc ; complete all as specified and as directed by Engineer-in-Charge.
Supply and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand ; complete all as specified and as directed by Engineer-in-Charge.
Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas ; complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of floor ; complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for 50mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in flooring Finishing fair and even ; complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
Supply and fixing factory made uPVC white colour two track two panels sliding glazed window upto 1.50m height made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 Kilogram), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 Kilogram), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
Supply and Fixing in repair of One piece ceramic floor/wall mounted EWC with features like twin flush system, noisless soft close seat cover, anty-bacterial surface white with PVC(SWR) 'P' / 'S' trap 110/110mm bore ; complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing 5mm thick hollow PVC Wall Lining consisting of Plain colour PVC sheet 1mm thick inclusive of solvent cement, PVC frame and all necessary items for fixing at site as per specifications and ; complete all as specified and as directed by Engineer-in-Charge.
B.J.CONSTRUCTION CO
m/s inder construction co
M/S RASHPAL CONSTRUCTION CO
m/s. gopal krishan
MAAN ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .