Road Safety Work at Widening and Strengthening of Pilibhit Basti Road to Bela Jograjpur Harnai Road (ODR) Ch. 0.00-9.30 and Ch. 14.50-15.50 Km. in Distt. Shahjahanpur. (Fin Year 2025-26)

Providing & laying of hot applied thermo plastic compound 2.5 mm thick including reflect rising glass beads @ 250 gm per Sq.M. area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35 including cost of all materials, labor, machineries, T & P etc. required for proper completion of work including all other charges and taxes. The finished surface to be level, uniform and free from streaks and holes as per MORT&H specification No. 803.

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. Maximum Speed Limit

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. Stop

providing and erecting direction and place indentification rero reflecivtorised sign as per IRC-67 made of high intencity grade sheeting vide clause 801.3 fixed over aluminium sheeting 2 mm thick with area not exceeding .9 sqm supported on a miled steel single iron post 75x75x6 mm firmly fixedon theground by means of property designed foundation with m 15 grade cement conctete 45x45x60 cm below ground level as per approved drawing complete(90x90)cm Hazard Sign

Supply, fixing & eraction of built up Cantilever Structure of 6 m span comprising of One vertical posts of 6.00 M height made up of 300 mm NB heavy class MS pipe as vertical member welded with 10 mm MS plate at top & 12 mm M S plate at bottom. The horizontal Truss shall comprise of 50 mm dia heavy class M.S. pipe and 40 mm dia heavy M S pipe as bracing & 10 mm MS plate at bottom for fixing to vertical post as per structure design & drawing with one of steel primer and two coats of synthetic enamel plant. The work includes construction of RCC Foundation of size 0.90x0.90 mm of required depth as per site condition for built up structure including Earth work in excavation 100 mm thick Lean Concrete in 1:4:8 (cement coarse sand and 40 mm gauge S.B) RCC with 1:2:4 (cement, coarse sand and 20 mm stone grit) including supply and fixing of 25 mm dia Foundation Bolts 600 mm long as per provision of structure design including cost of reinforcement & shuttering. The lateral vertical clearances and complete. Installation work shall be as per relevant clauses of MORT&H specification section 800 and IRC 67 2010 complete in all respect. The Rates shall include cost of design, fabrication, supply, transportations, Local shifting Erection of Signage structure using crane, inclusive of all taxes, royalty, VAT etc. all T&P machine, material and labour required for proper completion of work as per direction of Engineer-in-charge.

Providing & fixing of reflective signs with a corrosion resistant 4 mm thick aluminium composite panel face to be fully covered with High Intensity prismatic sheeting type IV as per IRC-67:2010 retro reflective sheeting with MS angle frame of 35x3

Supply of Reflective Delineator Post made of 75 mm dia O/D.M.S. pipe harave duty of size 1.20 mtr long on bottom size 25x6 mm flat iron welded of holes fast. All elecrically welded and painted with one coat of red oxide and two coats of black stowing enamel paint and 4 nos. of reflective strips will be fix in red and yellow color complete as per direction of E/I.

Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per MORT&H Specification Clause 811