Construction of Day Care PHC Building as per IPHS Norm at Durdura PHC under Jashipur Block under XV-FC for the year 2024-25.

Civil

Ground Floor

Earthwork in excavation of foundation in all kinds of soil including dressing and levelling the bed to required depth and width and deposting the excavated materials away from work site as directed by Engineer in charge.

S/F of 5KVA Automatic Voltage Stabilizer(130-300V), (Make-Microtech/V-Guard/ Shakti)

Filling foundation and plinth with sand well watered and rammed with cost carriage of all materials etc.

Cement concrete (1:2:4) with 12mm size chips of approved quality etc.comp.

R.C.C. work of M-20 using 20 mm and dowm graded cb. Chips with cost carriage of all materials etc. complete.

Column Base

Grade Beam

Column

Lintel

Chajja

Roof Beam

Stair case

Provision of 15 KVA DG set

Roof slab

20mm thick grading Plaster (1:4) with water proofing cement compound etc complete.

Superstructure

Fly ash Brick massonary in c.m. 1:6 having crushing strength 75kg/cm2 with cost carriage of all materials etc.

Fly ash Brick massonary in c.m. 1:4 in superstructure having crushing strength 75kg/cm2 with cost carriage of all materials etc.

16 mm thick c.p. 1:6 over brick work in finished smooth with cost carriage of all materials etc.

12mm thick c.p. 1:6 over brick work in finished smooth with cost carriage of all materials etc.

6mm thick c.p. 1:4 for RCC work with cost of all materials and labour etc.

Providing fitting and fixing of false ceiling with Aluminum anodised T Section No. 3215 with 2'-0 center to center, L section NO. 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and P.V.C plug and the Aluminium grid 2-0 x 2" - 0" with India Gypsum board of 125mm thick. etc. complete.

providing fitting and fixing vitrified tiles in floor with c.m. 1:1 with cost of all materials etc.

providing fitting and fixing Granite tiles in Slab with c.m. 1:1 with cost of all materials etc.

Fixing glazzed wall tiles in dados,skirting and in rises of steps on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile.

Fixing chequred tiles in floors,treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile.

providing fitting and fixing M.S. window grills and grill gate made out of M.S. angle with flat with cost of all materials etc.

Door G

Providing fitting fixing stainless steel hand railing with cost of all mateerials etc.

Supplying fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame shutters and all fittings fixtures. (SOR page- 235, sl no-13)

Hoisting joists and trusses and placing in position.

Providing & fixing 30mm thick Flush door shutters conforming to IS 2002 (Part I) decorative type core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both face of shutters inclusive of 4 nos stainless steel butt hinges (100mm x 60mmX 2.5mm) 40mm stainless steel screws . Cyllindrical lock ( Godrej-9843) tower bolt SS 10x300 stainless steel ( Bathroom) ( Godredge 3264) PVC door Buffer with SS screw ,teak wood lipping around the edges and paste with 1.5mm thick laminate on both side of the flush door ,etc.including the cost of all materials hardware fittings cost of all labour ,conveyance ,loading , unloading ,T & P etc, complete as per the EIC.Providing supplying, fitting fixing of UPVC openable doors including all fitting cost. (SR page- 234, sl no-9)

Supplying and fixing-Fixing of Un-plasticised poly vinyl chloride (UPVC) (FENESTA/NCL VEKA LTD.) Ventilators Top Hung-60-Series duly manufactured using UPVC reinforced profiles of 60mm x 50mm x 2.5mm for outer frames, 75mm for outer frames. 75mm x 60mm x 2.5mm for casement window sash profile capable of mounting single glazing system, structurally reinforced with hhot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window sash shall be fitted with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No. per set of sashes and th esystem isto be installed at the site using anchor fasteners, silicon rubber sealant,easy glazing/deglazing at site etc. including cost and conveyance of all material, accessories, labour charges, materials and product conforming to ASTM D 638-14,EN-447-95 and other applicable codes and standards.(Ref.-Office of the Engineer-In-Chife (CIVIL), Odisha Nirman Soudha,Bhubaneswar. Lt. No-16100)

Supplying, fitting fixing of two track UPVC Sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fittings and fixtures. (SR page- 235, sl no-12)

Supplying fitting fixing of 2'-0" wide Almirah made out up 19mm & 12mm BWR Ply & covered with 1mm Laminated (Sunmica) including Cromium coated handle 75mm with 125 x 25mm / 100mm with 150x25mm including all fitting including cost of material all taxes, T&P etc complete as per direction of Engineer -in-charge

Finishing walls with water based acrylic wall putty with any approved shade with cost of all materials etc.

Priming one coat with any approved shade with cost of all materials etc.

Finishing walls with plastic emulsion paint two coats any approved shade with cost of all materials etc.

Finishing walls with weather seal coat paints two coats any approved shade with cost of all materials etc.

Painting two coats over a coat of primer with any approved shade with cost of all materials etc.

Providing and laying 80 mm thick factory made cement concrete interlocking paver block of M 30 grade made by block machin of approved size, design & shape and in required patter on road surfce including filling the interstics with sand etc complete.Ref pg-233 sl no-02

Cement concrete (1:2:4) with 12mm size chips of approved quality etc.comp.

Grade Beam

Column

Earthwork in ordinary soil with initial lead and lift including rough dressing and breaking clods upto 5cm to 7cm size and laying in layers each layer not exceeding 0.3m in depth etc. complete.

Stair case

Roof beam

20mm thick grading Plaster (1:4) with water proofing cement compound etc complete.

Fly ash Brick massonary in c.m. 1:4 in superstructure having crushing strength 75kg/cm2 with cost carriage of all materials etc.

16 mm thick c.p. 1:6 over brick work in finished smooth with cost carriage of all materials etc.

Supplying fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification.

Supplying fitting fixing of 2'-0" wide Almirah made out up 19mm & 12mm BWR Ply & covered with 1mm Laminated (Sunmica) including Cromium coated handle 75mm with 125 x 25mm / 100mm with 150x25mm including all fitting including cost of material all taxes, T&P etc complete as per direction of Engineer -in-charge

Finishing walls with water based acrylic wall putty with any approved shade with cost of all materials etc.

Priming one coat with any approved shade with cost of all materials etc.

Finishing walls with plastic emulsion paint two coats any approved shade with cost of all materials etc.

Finishing walls with weather seal coat paints two coats any approved shade with cost of all materials etc.

Providing & fixing 30mm thick Flush door shutters conforming to IS 2002 (Part I) decorative type core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both face of shutters inclusive of 4 nos stainless steel butt hinges (100mm x 60mmX 2.5mm) 40mm stainless steel screws . Cyllindrical lock ( Godrej-9843) tower bolt SS 10x300 stainless steel ( Bathroom) ( Godredge 3264) PVC door Buffer with SS screw ,teak wood lipping around the edges and paste with 1.5mm thick laminate on both side of the flush door ,etc.including the cost of all materials hardware fittings cost of all labour ,conveyance ,loading , unloading ,T & P etc, complete as per the EIC.Providing supplying, fitting fixing of UPVC openable doors including all fitting cost. (SR page- 234, sl no-9)

Wiring

Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire: Finolex/ L&T / Anchor / Havels /HPL / V Guard/KEI/ Greatwhite/Polycab) (Make of Switch & Socket: Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti)

-do- Group A

-do- Group B

-do- Group C

Recessed wiring to Fan Point in...

-do- Group B

Recessed wiring to Exhaust Fan Point in…..

-do- Group C

S/F of fan hook 'S' type made of 16 mm MS rod for fixing in the Existing RCC Roof.

S/F of Angle holder replacing Ceilling Rose (Make : Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti)

Swich Boards

S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board (Make of Switch & Socket: Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti)

S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required. (Make of Switch & Socket: Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti)

S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required (Make of Switch & Socket: Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti)

S/F of Power point with 4 modular & 2 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket & Mini DP MCB, connection, painting etc as required for AC&Gyser. (Make of Switch & Socket: Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti)

S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch & 1 no of Mini MCB complete with wiring on 12 modular M.S. box with modular cover. (Make of Switch & Socket: Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti)

S/F of 1 no of 5 pin 15/16 amp. Socket , 1 no of switch & 1 no of 15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as required for Inverter connection. (Make : Anchor / Cona/ Greatwhite/ Havells/ Legrand/ L&T)

S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required.

4 Modular box with base & cover

6 Modular box with base & cover

8 Modular box with base & cover

12 Modular box with base & cover

Sub-Main

Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire: Finolex/ L&T / Anchor / Havels /HPL / V Guard/ KEI/ Greatwhite/ Polycab)

Inverter wiring (1x2.5smm) Copper wire (1.19.11a)

Circuit Breakers

S/F of 'B/C/D' series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1) (Make : Anchor / Cona/ Greatwhite/ Havells/ Legrand/ L&T)

S/F of C series TPN MCB of 63 amp rating (As per direction of engineer in charge) 440Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required without MCB box(2.6.4) (Make : Anchor / Cona/ Greatwhite/ Havells/ Legrand/ L&T)

Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.)

Earthing

Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17)

S/F of Cu .Earth Plate Earthing 600 mm x600mmx3.15mm with Salt & Charcoal for Earth electrode (3:5)+(3.6)

Fittings

Providing & fixing plain 16/0.2mm twin twisted flexible, FR PVC insulated copper cable in polythene sleeve or conduit of suitable size on the floor/wall or side of the table/door etc as required.(1.31)

Supply and fixing of 225mm Exhust fan with all accessories and connections (Make:Usha-Aero Clean Plus DBB/Crompton- Trans Air 12" reversiable /Havells-Venti Air DS (HS)/Anchor- Anmol delux R/ Orient-Power Flow DBB/ Pollycab -Fresh on DBB )

Recessed wiring to Call Bell Point in...

S/F of 18-25Watt L.E.D Tube light fitting with all accessories and connections ( Make- Crompton/ HPL/ Polycab/ Havells/ / Panasonic/ RR/Crompton )

SITC of 1200mm Sweep BLDC Ceiling Fan with Aluminium Blades having watage not more than 28 watt & Air Deleivery ≥ 215m3/min. (Replacement warranty will be 4 years) (Make:Usha-Techinix /Crompton- Energion Groove/Havells-Efficiencia Neo)

S/F step type modular fan regulator

Supply & fixing of superior type Led bulk head fitting general domestic use ISI marked square / oval type including necessary connections. ( M-5 ) (Make: Havells/ Bajaj/Equivallent Make)

Supply and fixing of 45-48 Watt Single LED Street Light Fitting with LED & Electronic driver with all accessories and connections (Make- Crompton/ Phillips/ HPL/ Polycab/ Havells/ Panasonic/ RR/ Orient )

S/F of 15w Watt LED Bulb (Make- Crompton/ Phillips/ Havells/ Panasonic)

S/F of Call bell/ Buzzer (Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required (1.30)

S/F of 36W LeD Celing light with 2x2 panel with 6500K with surface Panel rings (Havels/V-Guard/HPL/L&T/Great White/Pollycab)

S/F of 2250 VA/24V Inverter with 2 nos. 180Ah battery including trolley arrangement (Make: V-Guard/ Microtake/ Luminous)

-do- Group C

Cables

2 Modular box with base & cover

Panels

S/F of 6 way (6+18) TPN MCB DB double door (2.5.6)

Provision of Armoured cable size 3 1/2 x 35sqmm (25) Make: Gloster/ KEI/ Finolex/ Anchor/ Havells/ V-Guard/ HPL/ L&T/ Greatwhite/ Pollycab)

Internal PH

30 user septic tank

Earth work in all kinds of soil in excavation of foundation trenches within 50m initial lead including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30 in depth and depositing the soil as per direction of EIC.

Initial lift upto 1.5 mtr

From 1.5 mtr to 3.0 mtr depth

Supplying all materials, labour T&P and filling in F&P with river sand well watered and ramme

d including conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC

Supplying all materials labour T&P and providing c.c. (1:3:6)using 4cm hg metal including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC.

Supplying all materials labour, T&P and providing c.c. (1:1.5:3) using 12mm hg chips including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC

Supplying all materials labour T&P and providing brick work with Fly ASh Bricks having c. s. not less than 75Kg/cm2 with dimensional tolerance +-8% in cm (1:4)including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and dir of EIC

( a) In F&P in cm (1:4)

Supplying all materials labour T&P and providing c.c. (1:1.5:3) using 12mm hg chips for RCC works including hoisting laying, watering, curing, conveyance of all materials to work site payment of royalty taxes etc. all complete as per specification and direction of EIC

Supplying all materials labour T&P and providing MS reinforcement for RCC works including cutting, bending, binding and tying the grills and placing in position including cost of binding wire and 18 to 20 gauge conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC.-

Supplying all materials labour T&P and providing rigid and smooth centering and shuttering for RCC works including false work and dismantling them after casting including conve4yance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC-

Supplying all materials labour T&P and providing cement plaster on brick/stone work including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC.

( a )12mm thick CP (1:3)

Supplying all materials labour T&P and providing cement punning including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC.

12mm C.P in 1:3

Supplying all materials labour T&P and providing cement flush pointing to brick masonry (1:3) including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC

Filling F&P with excavated materials including watering and ramming as per direction of EIC

Supplying all labour materials T&P and fixing of 2” RCC baffle wall precast with cc (1:1.5:3) using 12mm bhg chips for fitted to septic tank as per PH specification and direction of EIC

Supplying all materials labour T&P and providing fitting and fixing SW Tee in wall including filling the necessary with cement concrete (1:2:4) with 12mm size hg chips all complete materials to as per specification and dir of EIC.100x100x100mm PVC Tee/Y

Supplying all labour materials T&P and fixing of MS step iron in 20mm dia MS steel bar and fixing into walls of septic tank duly embedded in c.c. (1:3:6) all complete as per PH specification and direction of EIC-

Supplying all materials labour T&P and providing precast RCC manhole cover with cc (1:12:3) of 12mm hg chips including conveyance of all materials to site after payment of royalty and taxes etc. all complete as per PH specification and direction of EIC-(size 550mmx550mmx76mm)

Factory made FRP(alternately called GRP) door frame of size 75mmx100mm fabricated using E-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin. The thickness of the GRP skins shall not be less than 2.00mm. The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement, Six numbers of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design Centre's standards and specifications. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the E.I.C

Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gel coat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic polyester resin. The thickness of the skins shall not be less than 1.50mm Expanded Polystyrene(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reinforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/Light grey/ Mahogany/Teak wood or any other colour using high quality pigments. Three heavy weight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.

Providing for Supplying, fitting & Fixing of 600 mm x 600 mm polished Glazed vitrified tile of approved make & shade manufactured by reputed manufacturer like Somany Glacier White/ Johnson Super White/RAK Jazz White/ Kajaria Pulido balnco wall tiles in dados, skirting and in rises of steps on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including including cost of all materials, labours, T &P etc. required for the work complete in all respect as per directed by Engineer-in-Charge.

Ground Floor Wall

Supplying all materials labour T&P and fixing Ceramic tiles in floors. Treads and landing on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the3 shades of the tiles including rub bins and dir of EIC. Ground Floor

Supplying all materials labour T&P and providing painting two coats with approved cement paint on plastered surface etc. all compt as per specification and direction of EIC.

Supplying all materials labour T&P and cutting holes through brick/stone masonry works including making good the damages in cm (1:4) for taking H.C.I/PVC pipes and fittings etc. all complete as per PH specification and direction of EIC.250mm thick wall

375mm thick wall

Supplying all materials, labour, T&P and cutting holes through brick/stone masonary works including making good the damages in c.m. (1:4) for taking P.V.C. pipes & fittings etc. all complete as per P.H. specification and direction of E.I.C.

Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C.

Supplying all materials, labour, T&P and fixing water closet, squatting pan

(Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:4:8) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest etc all complete as per specification and direction of the E.I.C. (580mmx440mmSize) (Neycer/ Parry ware/ Cerra/Hindware Make)

Supplying all materials, labour T&P and fixing Wash Down Water Closet(Europeon type W.C. pan) with Integral ‘S’ trap to the floor with wooden plug and C.P.screws including jointing the trap with soil pipe in C.M.(1:1) etc. all complete as per specification & direction of E.I.CE..W.C. with ‘S’ trap plain(Neycer/ Parry ware/ Cerra/Hindware Make)

Supplying all materials, labour, T&P fitting and fixing Plastic Seat and cover for E.W.C. with chromium plated brass hinges and rubber buffers all complete as perr specification and direction of E.I.C. (Neycer/ Parry ware/ Cerra/Hindware Make)

Supplying all materials labour T&P and fitting & fixing UPVC SWR soil waste ventilating pipes and fittings of the following OD conforming to ISI No.13591/1992 to walls with nails bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method as per manufacturers specification testing e. w. in excavation in all kinds of soil and refilling of trenches as per direction of EIC 110mm dia UPVC SWR Pipe with rain water piping (.Ashirvad / Supreem / Oriplast / Hariplast) 110mm dia UPVC SWR Pipe

110mm dia U-PVC D/J/D

110mm dia U-PVC P. Trap

110mm U-PVC S/J with Door

110mm U-PVC door bend

110mm dia U-PVC Plain bend

110mm U-PVC Plain Tee

110mm U-PVC Cowl

125mm dia CP Grating

75mm dia U-PVC SWR Pipe

75mm dia U-PVC Plain Tee

75mm U-PVC Door Bend

75mm U-PVC Plain Bend

Supplying all materials labour T&P and fixing wash kitchen sink/laboratory sink with CI/MS brackets painted white including holes in walls and making good the damages etc. all complete as per PH sp and dir of EIC610x510x200 mm Stainless Steel kitchen Sink heavy good quality

Supplying all materials labour T&P and fixing wash basins with hole for pillar taps with CI/MS brackets painted white including holes in walls and making good the damages etc .all compt. As per PH sp. And dir. Of EIC.550x400mm WHB-(Neycer/ Parry ware/ Cerra/Hindware Make)

Pedestral 550x400mm WHB

Supplying all materials labour T&P and fixing mirror of superior glass mounted on 6mm thick AC sheet or plywood sheet and fixed to wooden plugs with cp screws and washers compt. As per PH specification and direction of EIC.Fixing of Glass Mirror 600mmx450mm size B.E mirror (fixed type)

Supplying all materials labour T&P and fixing standard size cp towel rail/ring compt. with cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC.CP Towel rail (20x600) heavy Stainless steel.

CP Towel ring heavy Stainless steel

Supplying all materials labour T&P and fixing standard size cp soap holder compt. With cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC Stainless steel with heavy good quality

Supplying all materials, labour T&P and fitting and fixing C.P shower with 15mm or 20 mm inlet with C.P shower arm including polishing all complete as per P.H. specification and direction of EIC 15mm dia cp shower (Jaquar make) (Shower+Arm)

Supplying all materials, labour T&P and fitting and fixing Acraylic shelf including polishing all complete as per P.H. specification and direction of EIC. 450mmx125mm size Plate Acraylic Shelf with heavy good quality

Supplying all materials labour T&P and fitting and fixing 10 ltr capacity low level flushing cistern with a pair of cast iron or m.s. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float, c.p. brass handle, unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia cp foush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main etc. all complete as per specification and direction of EIC. 10ltr Capacity Cistern (Neycer/ Parry ware/ Cerra/Hindware Make)

Supplying all materials labour T&P and providing, fitting and fixing Aquaguard Thermapure 120 PSS RO ACH, Approximate external dimention (WxDxH) 750x690x1465, Operating power supply -230V AC(5Hz) power rating (Max) Total-1580(+/-)10%, heating coil-1000W, water storage tank capacity Total-120liters, Cold-80L, Hot-20L, Ambient-20L, Cooling capacity at comfort label 60LPH, water outlet temperature at rated condition Cold-15 Deg C +/-1, Hot-50 Deg C+/-1, Regrigerant HFC R 134-a, Thermal insulation for storage tank-PUF, No of faucets-03 (1 hot, 1 Cold, 1 Ambient) , No of stages for filter cum purifier-07, RO membrance rating -4 No x80 GPD or equivalent permeate (Purified water) production capacity -50LPH, % of purified water recovery -40%, %Rejection of DS-90% Approx storage tank material -SS 304, Outer body material-front SS 304, Type of product product construction-concealed, Type of Installation-Indoor, Weight-92KG etc all complete as per direction of Engineer in Charge.

Supplying all materials labour T&P and providing, fitting and water storage tanks for Liquid waste treatment including and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting and placing to the required position, including cost of tank conveyance and taxes of all materials to work site involves managing and treating liquid waste generated from various medical procedures, patient care and laboratory testing to prevent contamination and to esure safe disposal fixing etc all complete as per direction of Engineer in Charge.

Supplying all materials labour T&P and constructing gully trap chamber of the following inside size with 8cm thick RCC precast cover slab in cc (1:1.5:3) using 12mm size hg chips foundation concre3te(1:3:6) using 40mm size hg metal on bed and around trap FLY ASH Brick work in cm (1:6) in F&P and inside 12mm thick cp (1:3) finished with a floating coat of neat cement including fixing 100mm size HCI gully trap and grating etc. all complete as per approved drawing specification and dir of EIC.Inside size 250mmx250mm gully trap

Supplying all materials, labour T&P and construction of Inspection chamber of the following sizes with c.c.(1:3:6) using 40mm size hg metal on bed, FLY ASH Brick work in cm(1:6) moulding and shaping the channel inside and benching with c.c. (1:1.5:3) with punning to inside cement flush pointing (1:3) to outside RCC cover slab in cc (1:1.5:3) using 12mm size hg chips with RCC m. h. cover, e. w. in excavation in all kinds if soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to site payment of royalty taxes etc. all complete as per approved specification and direction of EIC.Inside size : 760 x 760 x 460mm Inspection Chamber

Supplying all materials, labour, T&P and constructing Manhole Chamber of the following sizes with cement concrete (1:3:6) using 40 mm size HG metal on bed, 1st class KB Brick work in CM (1:6) moulding and shaping the channel inside and benching with C:C (1:1.5:3) using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in C.C(1:1.5:3) using 12 mm size H.G chips with RCC man hole cover, earth work excavation in all kinds of soil and refilling the cavity around the camber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per approved specification and direction of E.I.C 910mm x 910mm x 910mmm Manhole chamber

Supply

ing all materials labour, T&P and constructing soak way pit of the following sizes with precast RCC rings joined loose gravel backing in the rear of well staining, precast RCC cover slab in c.c. (1:2:4) USING 2mm size hg chips fitted with iron lifting handles including e. w. in open well excavation in all kinds of soil and refilling the cavity around the pit and painting the iron works watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per approved drawing, specification and direction of EIC.1.22m dia x 2.10m deep

Supplying all materials labour T&P and construction soak way pit of the following sizes with dry brick walling from bottom upto invert of inlet pipe and FLY ASH Brick work in cm(1:6) for the remaining height at top 12mm thick cp (1:4) inside and outside over masonry brick work gravel packing the rear of well staining RCC cover slab in c.c. (1:1.5:3) using 12mm size hg chips fitted with iron lifting handles including e.w. in open well excavation in all kinds if soil and refilling the cavity around the pit and painting the iron works, watering, curing, conveyance of all materials to work site payment royalty, taxes etc. complete as per approved drawing specification and direction of EIC. 1.20m dia x 2.00m deep soak way pit

Supplying all labour materials T&P and laying of UPVC soil waste pipe of the fo0llowing internal diameter confirming to IS in trenches of the depth upto 1.2mtr including jointing with supply of approved rubber, lubricant by non heat application method on bending with 150mm thick cc (1:3:6) using hg metal of 25mm to 40mm and then making all-round encasing including earth work excavation in all kinds of soil, refilling the trenches watering, curing, conveyance of all materials to site payment of royalty, taxes etc. & testing all complete as per PH sp and dir of EIC.160mm dia with allround encasing

Providing and fixing Chlorinated polyvinyl Chloride (CPVC) Pipes conforming to I.S 15778 having the thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 mtr spacing, this includes jointing of pipes and fittings with one step solvent cement and testing of joints etc all complete as per direction of the E.I.C.

20 mm dia C-PVC Pipe( Internal)

25mm dia (ASTM )PVC Pipe

40mm dia (ASTM ) PVC Pipe (external)

Supplying all Materials labour T&P and fitting and fixing brass/CP Fittings of the following nominal bore with supply of all jointing materials etc. complete as per PH Specification and Direction of EIC. 15 mm dia CP Pillar Cock Elbow Action JAQUAR Make

20mm dia cp concealed stop cock JAQUAR Make

15mm dia cp angle stop cock JAQUAR Make

15mm dia cp bib cock S.B. JAQUAR Make

15mm dia cp bib cock L.B. JAQUAR Make

15mm dia cp bib cock Elbow Action JAQUAR Make

15mm dia CP Two way bib Cock JAQUAR Make

Health Fuccet JAQUAR Make

15mm dia CP flange JAQUAR Make

15mm dia CP Extension piece JAQUAR Make

25mm dia PVC Ball Valve

40mm dia PVC Ball Valve

Supplying all materials labour T&P and fixing water storage tanks including and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting and placing the to the required position, including cost of tank conveyance and taxes of all materials to work site etc. all complete as per PH specification and direction of EIC.

2000 lit PVC water storage Tank (1st Floor)

Supplying all materials labour T&P and construction of masonry staging with providing 1st KB brick work in cm (1:6) of 0.40mtr height in staging and in circular protection wall to support to the tank 12mm thick cement plaster in cm (1:4) over brick work RCC beam of 2.61 x 0.25x0.30 using cc (1:1.5:3) using 12mm chips including centering and shuttering curing, conveyance of all materials to work site etc. all complete as per sp and dir of EIC.

2000 ltr capacity tank 1st floor

Supplying of ISI mark 1.00 HP single phase vertical submersible pump set with discharge of 900-1000 ltr/hour and a head of 50-60 mtr of reputed make like KSB/Texmo & Equivalent including all cost, conveyance and taxes etc. all complete as per direction of E.I.C.

Supplying all labour T&P and fitting and fixing of 1.00HP single phase verticaql submersible pump set with commissioning and testing etc. all complete as per direction of EIC.

Supplying and fitting and fixing of ISI mark DOL starter of reputed make like BCH or equivalent for 1.00HP single phase submersible pump including all cost, conveayance and taxes etc. all complete as per direction of EIC.

Supplying and fitting and fixing of three core flat cable (1.5mm2) of ISI make of reputed company like BCH/Finolex or equivalent and connecting the pump and starter including all cost, conveyance and taxes etc. all complete as per direction of EIC.

Supplying and fitting and fixing jof plastic rope, MS well cover, MS clamp, stainless steel short piece, bend & socket including all cost, conveyance and taxes etc. all complete as per direction of EIC.

Supplying and fitting and fixing of HDPE pipes and pipe fittings with making connection to pump set including all cost, conveyance and taxes etc.all complete as per direction of EIC. 25mm dia HDPE Pipe(Internal Pipe)