SITC of 33/0.433kV, 2x1250kVA Sub-station for Power Supply to M/s RIR Power at Flatted Factory, EMC Park, Janla, Khordha

SITC of 1250 KVA, 33/0.433 KV, 3 Phase, 50 Hz, core type, outdoor type, natural oil cooled, Copper wound, distribution transformer manufactured as per IS: 1180 (Part 1): 2014 Level II/Star-I having On Load tap Changer ranging from +5% to -15% in 8 steps of 2.5% each, and complete fittings with all accessories including required transformer foundation, first filling of oil, RTCC Panel, Cabling, Control Wiring and HT/LT side cable end termination box as per specification and direction of EIC .(Make: Voltamp/ Alfa/ scheneider/ OTPL/ OEU)

Supply, delivery, laying & testing of following sizes XLPE insulated, PVC sheathed, strip/wire armoured aluminium conductor power cable of 33000 volt grade laid directly in ground/ on surface of wall/ column/ existing RCC/ stone ware/ through HDD or trench Stranded Compacted Circular Aluminium Conductor, Conductor Screen with Extruded Semi Conducting Compound, XLPE Insulated, Insulation Screening with Extruded Semi Conducting Compound in Combination with Copper Tape, Cores Laid Up,Innersheath of PVC, Galvanised Steel Flat Strip Armoured, & Overall PVC Sheathed Cable Conforming to IS 7098 (Part-2) as the case may be including excavation of earth in all kinds of soil including cable route marker as per EIC & rock, sand cushioning, protective covering, refilling the trench with sand, brick covering and cable end termination but excluding the cost of G. I. pipe/ hume pipe compete with making good the damages caused as required and as per direction of Engineer-in-charge. Make :- KEI/ POLYCAB/ HAVELLS/ RR Kabel

3 core x 240 sqmm AL A2XFY

Supply, delivery, installation, testing & commissioning of HV Cable(33KV) End Termination Kit with lugs as required (Outdoor/Indoor Type )

3 core x 240 sqmm AL A2XFY (OutdoorType )

LT Cable(1.1KV), 3.5C x 400 SQMM

Supply of 3.5C x 400 SQMM PVC insulated & PVC sheathed/XLPE cable , armoured aluminium conductor power cable of 1100 volt grade as per direction of Engineer-in-charge. Make :- KEI/HAVELLS/RR KABLE/FINOLEX/POLYCAB

Laying of one number 3.5C x 400 SQMM PVC insulated and PVC sheathed/XLPE power cable of 1100 volt grade in existing HDPE/HUME/RCC or directly in ground with Cable route marker as per IS and direction of EIC.

Supplying & making end termination with Double Compression Flame Proof Type Brass Cable Gland and aluminium lugs for following size of PVC insulated and PVC sheathed /XLPE aluminium conductor cable of 1.1KV grade as required. Make:-Jaison,Comet, Dowells, Raychem

3.5 core X 400 sqmm

Construction of 33 KV 4 Pole using WPB GI Pole 160x152(13Mtr. Long,30.44KG/Mtr) with 2 nos. of isolator with earth switch & LA.

Supply and erection of 13mtr long 160 x 152 WPB pole (GI) (30.44KG/Mtr.). Including excavation of pole pit in all king of soil with depth upto 1/6th of pole height. Complete in all respect as per the specification and direction of EIC.

Supply and installation of Top Channel 100X50X6mm, 9.56 KG/Mtr. each channel length 4.3 mtr., 8 no's channel required =(8x9.56x4.3).Complete in all respect as per the specification and direction of EIC.

Supply and installation of Fish Plate 50x6 mm., 2.36 kg/Mtr., each 0.280 mtr. length, 24 no's required = (24x2.36x0.280).Complete in all respect as per the specification and direction of EIC.

Supply and installation of Isolator Support Support Channel 75X40X 4.8mm., 7.14KG/Mtr., each channel length 4.3 Mtr., 2 no's channel required =(2x7. 14x4. 37 Isolator. Complete in all respect as per the specification and direction of EIC.

Supply and installation of Double Pole Belting Channel 75X40X 4.8mm., 7.14KG/Mtr., each channel length 4.3 Mtr., 8 no's channel required =( 8x7.14x4.3). Complete in all respect as per the specification and direction of EIC.

Supply fabrication and installation of 50x50x6mm.Gl Bracing Angle, 4.5Kg./mtr., each angle length 4.927 mtr., 8 nos angle required = (8x4.5x4.927). Complete in all respect as per the specification and direction of EIC.

Supply and installation of Isolator Operating Down Pipe Support Channel 75X40X 4.8mm., 7.14KG/Mtr., each channel length 0.8 Mtr.,1 no channel required =( 1x7.14x0.8)/ Isolator. Complete in all respect as per the specification and direction of EIC.

Supply & installation of Down Pipe Diagonal Support Angle, 4.5Kg./mtr., each angle length 0.388mtr., 1 no angle required (1x4.5x0.388)/ Isolator Complete in all respect as per the specification and direction of EIC.

Supply & installation of Down Pipe Base Support Angle, 4.5Kg /mtr.,each angle length 0.34mtr., 1 no angle required (1x4.5x0.340)/ Isolator. Complete in all respect as per the specification and direction of EIC.

Supply & installation of Isolator Support Side Cahnnel 100X50X6mm, 9.56 KG/Mtr., each channel length 0.5 mtr., 2 no's channel required =( 2x9.56x0.5)/ Isolator. Complete in all respect as per the specification and direction of EIC.

Supply & installation of Danger Plate, 2 no's. Complete in all respect as per the specification and direction of EIC.

Supply & installation of Back Clamp for danger Plate 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 2 no's = (2x0.59x0.510). Complete in all respect as per the specification and direction of EIC.

Supply & installation of Gi Pipe Earthing 40mm. 3 Mtr. Long). Complete in all respect as per the specification and direction of EIC.

Supply & installation of 50x6mm GI Flat for earthing, 2.36kg/mtr., (15 Mtr. For L.A, 4 Mtr for Isolator Body, 2.5 mtr. For mesh formation and 5 mtr. For raising). Complete in all respect as per the specification and direction of EIC.

Supply & installation of GI barbed wire anticlimbing device 3 Kg. Per support, 4 no's qty. required =(4x3kg). Complete in all respect as per the specification and direction of EIC.

Supply & installation of Back Clamp for anticlimbing device 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 16 no's =(16x0.59x0.510). Complete in all respect as per the specification and direction of EIC.

Supply & installation of Lightning Arrester(30KV,10KA) (Station Class,class-2). Complete in all respect as per the specification and direction of EIC.

Supply & installation of 33KV 1250 A ISOLATOR 25KA W E/S-SS BOX with channel/ Plinth mounted, Earth pit with strips & other accessories as required Complete in all respect as per the specification and direction of EIC.

Supply & installation of HW fitting(B&S) 90KN,4 Bolt. Complete in all respect as per the specification and direction of EIC.

Supply & installation of Disc insulator (B&S)90 KN polymer. Complete in all respect as per the specification and direction of EIC.

Supply & installation of Wedge Connector for 232 sq.mm AAA conductor. Complete in all respect as per the specification and direction of EIC.

Supply & installation of Paddle Clamp For Wedge Connector for 232 sq.mm AAA conductor. Complete in all respect as per the specification and direction of EIC.

Supply, paving and Stringing of 232 sq.mm AAA conductor. Complete in all respect as per the specification and direction of EIC.

Supply & installation of GI Nut . Bolt & Washer of different sizes. Complete in all respect as per the specification and direction of EIC.

Supply and painting of Black paint as required and direction of EIC.

Supply and painting of Yellow colour paint for background as required and direction of EIC.

Cost of Civil Works.

Mass concreting of Pole ratio 1:1.5:3 (500mmX500mmX2200mm)= 0.55Cu.Mtr .Complete in all respect as per the specification and direction of EIC.

Couping with ratio 1:1.5:3 with dimension( 500X500X450)= 0.1125 Cu mtr. Complete in all respect as per the specification and direction of EIC.

Construction Earthing chamber including installation of earthing pipe. Making earthing chamber including excavation, soil treatment with bentonide powder, calculation of earth resistance including Installation of 3Mtr Gl pipe 40mm/50mm including welding of GI flat around pipe. Complete in all respect as per the specification and direction of EIC.

Construction, design, installation of Switch Yard GI Chain Linking Fencing with 2 Mtr Height including PCC and provision of 2no gate as required and as per the direction of EIC.

Metal Spreading 100 mm. per Sq. mts. Area of spreading.

2000A, 4P, 50KA, EDO Type ACB with microprocessor controlled

Please Enable Macros to View BoQ information