Establishment of Hi-Tech Naturally Ventilated Poly House at College of Forestry, Ponnampet.

Establishment of Hi-Tech Naturally Ventilated Poly House at College of Forestry, Ponnampet.

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per d...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS C...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including...

Medium Duty GI pipe of 32mm dia

Medium Duty GI pipe of 40mm dia

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of ...

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to rem...

Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust,...

Supplying and fixing of Ginegar cool Driplock 205 micron polyhouse films having light transmission in PAR of 85% as per ASTM D-1003 & tear resistence of 9000-12000 Gr./mm as per ASTM D-1922 test metho...

Supplying and fixing of Aluminum Profile and PVC coated Zig-Zag spring.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet. Pot let and o...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Motor control panel (MCP) box to control motor start/stop, potentially with features like variable speed control

Supplying and fixing of 50% UV stabilized Green Shade-net of superior quality Mono Filament shade-net

Supplying and fixing of Finolex Co., ISI Mark U.V Stabilized high efficiency black colour 16mm plain lateral drip pipe line.

Supplying and fixing of Anti Leak Foggers with weights of Netfin Co.,

Supplying and Installing of Jain Co., ISI mark 2" Disc Filter system with 1.0 HP motor with ventury valve

Supply of Tata G.I Wire 14 guage to support Drip pipe lines

Sliding door with Polycarbonate sheet with 25mm GI pipe frame and aluminium channel at the top for easy sliding

Providing, Supplying and fixing Insect-proof net UV-stabilized HDPE net inside the polyhouse on side walls complete with all accessories

Providing, Supplying and fixing 1.6mm thick gutter sheet complete with all accessories

Transportation, labour charges, nuts & bolts, clamps electrification work etc

Providing and fixing 48" horizontal draft fan 1800 cum per hour for a total air volume with Aluminum lever and 430 to 500 rpm with 1.5hp 3phase 1420 rpm motor with guarded mesh complete as per specifi...

Providing and fixing cellulose cooling pad of size 4" thickness with aluminium top and bottom gutters of spashers of approved brand (Mantoor, Galaxy) including all necessary fixtures complete as per t...

Supplying, commisioning and fixing 2/1.5 HP pump to operate foggers and sprinklers in polyhouse, including necessary fittings, cost of materials, labour complete as the directions of engineer in charg...

Elecricals fiitings and instalation works